Request Quote
(Ships tomorrow)
MAX3232EIDW RS232 Transceiver Equivalent & Substitute Parts
Part Overview
The MAX3232EIDW is a 2/2 full-duplex RS232 transceiver manufactured by Texas Instruments, housed in a 16-SOIC surface mount package. This interface IC operates across a 3V to 5.5V supply range with a 250kbps data rate and 300mV receiver hysteresis. The part is classified as Last Time Buy, indicating production discontinuation. Identifying equivalent and substitute parts is essential for design continuity, inventory management, and long-term product support.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | MAX3232EIDW |
| Manufacturer | Texas Instruments |
| Category | Interface |
| Type | Transceiver |
| Protocol | RS232 |
| Number of Drivers/Receivers | 2/2 |
| Duplex | Full |
| Data Rate | 250kbps |
| Voltage Supply Range | 3V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C |
| Package / Case | 16-SOIC (0.295", 7.50mm Width) |
| Mounting Type | Surface Mount |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
| Product Status | Last Time Buy |
Substitute Part Grouping Explanation
Substitution eligibility for the MAX3232EIDW is determined by the following critical parameters:
- Protocol: RS232 full-duplex transceiver functionality
- Driver/Receiver Configuration: 2/2 topology
- Package: 16-SOIC form factor with matching pin pitch and dimensions
- Voltage Supply: 3V to 5.5V operating range
- Data Rate: Minimum 250kbps capability
- Operating Temperature: -40°C to 85°C range
- Compliance: ROHS3 and REACH requirements
Substitute parts are grouped into three categories:
- MFR Recommended Equivalents: Same base product number (MAX3232) with different packaging or temperature grades, maintaining identical electrical specifications.
- Parametric Equivalents: Alternative manufacturer parts meeting all critical electrical and mechanical parameters with compatible pinouts.
- Direct Alternatives: Parts from different manufacturers with equivalent functionality but potential minor specification variations (receiver hysteresis, data rate).
Parameter Comparison
| Part Number | Manufacturer | Packaging | Data Rate | Receiver Hysteresis | Package Width | Product Status | Inventory |
|---|---|---|---|---|---|---|---|
| MAX3232EIDW | Texas Instruments | Tube | 250kbps | 300mV | 7.50mm | Last Time Buy | 82,779 Pcs |
| MAX3232EIDWR | Texas Instruments | Cut Tape & Digi-Reel | 250kbps | 300mV | 7.50mm | Active | 3,650 Pcs |
| MAX3232IDW | Texas Instruments | Tube | 250kbps | 300mV | 7.50mm | Last Time Buy | 50,611 Pcs |
| TRS3232EIDW | Texas Instruments | Tube | 250kbps | 300mV | 7.50mm | Last Time Buy | 2,200 Pcs |
| MAX3232EEWE+ | Analog Devices Inc./Maxim Integrated | Tube | 250kbps | 500mV | 7.50mm | Active | 787 Pcs |
| MAX3232EEWE+T | Analog Devices Inc./Maxim Integrated | Cut Tape & Digi-Reel | 250kbps | 500mV | 7.50mm | Active | 2,608 Pcs |
| ADM3202ARNZ | Analog Devices Inc. | Tube | 460Kbps | 400mV | 3.90mm | Active | 4,121 Pcs |
| ADM3202ARNZ-REEL | Analog Devices Inc. | Cut Tape & Digi-Reel | 460Kbps | 400mV | 3.90mm | Active | 44,100 Pcs |
| ADM3202ARNZ-REEL7 | Analog Devices Inc. | Cut Tape & Digi-Reel | 460Kbps | 400mV | 3.90mm | Active | 27,977 Pcs |
| ADM3202ARWZ | Analog Devices Inc. | Tube | 460Kbps | 400mV | 7.50mm | Active | 1,515 Pcs |
| ADM3202ARWZ-REEL | Analog Devices Inc. | Cut Tape & Digi-Reel | 460Kbps | 400mV | 7.50mm | Active | 1,700 Pcs |
Engineering Selection Recommendations
For applications requiring direct pin-compatible replacement of the MAX3232EIDW:
MAX3232EIDWR is the primary recommendation. It maintains identical electrical specifications (250kbps, 300mV hysteresis, 7.50mm package width) while offering Active product status and improved supply availability through Cut Tape & Digi-Reel packaging. Both parts are ROHS3 compliant and REACH unaffected.
MAX3232IDW and TRS3232EIDW provide parametric equivalence with identical electrical performance and package dimensions. Both are classified as Last Time Buy, similar to the original part.
For applications where higher data rates are acceptable, ADM3202ARWZ and ADM3202ARWZ-REEL offer 460Kbps capability with 400mV receiver hysteresis, maintaining the 7.50mm package width. These Analog Devices parts are in Active production status with substantially higher inventory levels (44,100 Pcs for REEL variant).
ADM3202ARNZ and related variants feature narrower 3.90mm package width, requiring PCB layout verification before substitution.
MAX3232EEWE+ and MAX3232EEWE+T variants exhibit 500mV receiver hysteresis, which may affect noise margin performance in marginal signal environments.
All recommended substitutes maintain ROHS3 compliance, MSL Level 1 rating, and -40°C to 85°C operating temperature range.
Frequently Asked Questions (FAQ)
Q: Can MAX3232EIDWR directly replace MAX3232EIDW?
A: Yes. Both parts share identical electrical specifications (250kbps data rate, 300mV receiver hysteresis, 3V-5.5V supply), 16-SOIC package with 7.50mm width, and pin configuration. The difference is packaging format: EIDWR uses Cut Tape & Digi-Reel while EIDW uses Tube. Electrical performance and PCB footprint are equivalent.
Q: What is the difference between MAX3232 and ADM3202 series?
A: Both are RS232 2/2 full-duplex transceivers in 16-SOIC packages. ADM3202 variants offer higher data rates (460Kbps vs. 250kbps) and higher receiver hysteresis (400mV vs. 300mV). ADM3202 parts are in Active production with greater inventory availability. Pinout compatibility depends on specific variant; verify package width (3.90mm vs. 7.50mm) against PCB design.
Q: Does package width affect substitution?
A: Yes. The MAX3232EIDW uses 16-SOIC with 7.50mm width. ADM3202ARNZ variants use 16-SOIC with 3.90mm width. While both are SOIC packages, the narrower width affects PCB footprint and component placement. Verify PCB layout compatibility before substitution. ADM3202ARWZ and ADM3202ARWZ-REEL maintain 7.50mm width for direct layout compatibility.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All listed substitute parts carry ROHS3 compliance and REACH unaffected status, matching the original MAX3232EIDW environmental requirements.
Q: What is the significance of Last Time Buy status?
A: Last Time Buy indicates the manufacturer has discontinued or will discontinue production. MAX3232EIDW, MAX3232IDW, and TRS3232EIDW carry this status. For long-term supply security, Active status parts (MAX3232EIDWR, ADM3202 series, MAX3232EEWE variants) are preferred for new designs or high-volume production.
Q: Can I use MAX3232EEWE+ as a substitute?
A: Electrical substitution is possible. MAX3232EEWE+ maintains 250kbps data rate and 7.50mm package width. However, receiver hysteresis is 500mV versus 300mV in the original part. Higher hysteresis reduces sensitivity to noise but may affect detection of weak signals. Application-specific signal margin analysis is required.
Q: Which substitute offers the best inventory availability?
A: ADM3202ARNZ-REEL provides the highest inventory (44,100 Pcs) with Active product status, 460Kbps data rate, and Cut Tape & Digi-Reel packaging suitable for automated assembly. This part is recommended for high-volume production requiring immediate supply.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts