CM6560R-334 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The CM6560R-334 is a 330 µH 2-line common mode choke manufactured by API Delevan Inc., designed for surface mount applications with a maximum current rating of 4.8A and DC resistance of 15mOhm. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance can be maintained within the allowed parameter tolerances for common mode choke applications, considering inductance value, current rating, DC resistance, physical dimensions, and thermal operating range.

Substiute Parts

CM6560R-334

API Delevan Inc.In Stock: 1060CM6560R-334 Datasheet

Current PartRFQ

CM6460R-224

API Delevan Inc.In Stock: 1045CM6460R-224 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CM6560R-334 are identified based on the following criteria:

Electrical Parameters:

• Number of lines: 2 (fixed requirement)
• Inductance value: Substitutes must operate within the common mode choke application range
• Current rating: Substitutes must support the required circuit current
• DC resistance: Substitutes must maintain acceptable power dissipation characteristics

Mechanical & Environmental Parameters:

• Mounting type: Surface Mount (fixed requirement)
• Package configuration: Horizontal, 4 PC Pad (fixed requirement)
• Operating temperature range: -55°C to 105°C (fixed requirement)
• Compliance: RoHS3 Compliant, REACH Unaffected, MSL 1

The CM6460R-224 qualifies as a parametric equivalent based on these allowed substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the CM6560R-334 and CM6460R-224 maintain Active product status with identical compliance certifications (RoHS3 Compliant, REACH Unaffected, MSL 1). Both components are manufactured by API Delevan Inc. and share identical thermal operating ranges (-55°C to 105°C).

Selection between these parts depends on circuit-specific inductance and current requirements. The CM6560R-334 provides 330 µH inductance at 4.8A maximum current. The CM6460R-224 provides 220 µH inductance at 5.0A maximum current with lower DC resistance (12 mOhm vs. 15 mOhm) and smaller physical footprint (13.46 mm vs. 16.00 mm).

Both components are suitable for applications requiring 2-line common mode filtering in surface mount configurations with identical compliance and reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can CM6460R-224 replace CM6560R-334 in all applications?

A: Substitution depends on circuit inductance requirements. The CM6460R-224 provides 220 µH compared to the CM6560R-334's 330 µH. Verify that the lower inductance value meets your filtering specifications before substitution.

Q: What are the physical footprint differences?

A: The CM6560R-334 measures 16.00 mm × 16.00 mm with 8.13 mm height. The CM6460R-224 measures 13.46 mm × 13.46 mm with 7.62 mm height. Both use Horizontal, 4 PC Pad package configuration. Confirm PCB layout compatibility before substitution.

Q: Are compliance certifications identical?

A: Yes. Both parts are RoHS3 Compliant, REACH Unaffected, with MSL 1 (Unlimited) rating. Both operate across -55°C to 105°C temperature range.

Q: How do current ratings compare?

A: The CM6560R-334 supports 4.8A maximum current. The CM6460R-224 supports 5.0A maximum current. The substitute part has higher current capacity and lower DC resistance (12 mOhm vs. 15 mOhm).

Q: What is the DC resistance difference impact?

A: The CM6460R-224 has 12 mOhm DCR compared to CM6560R-334's 15 mOhm DCR. Lower resistance reduces power dissipation and heat generation in the component.