TLV2711CDBVRG4 Equivalent & Substitute Parts

Part Overview

The TLV2711CDBVRG4 is a general-purpose operational amplifier manufactured by Texas Instruments, designed for rail-to-rail output applications in low-power circuits. This device features a single amplifier circuit in a compact SOT-23-5 surface mount package and operates across a 2.7 V to 10 V supply voltage range. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Substiute Parts

TLV2711CDBVRG4

Texas InstrumentsIn Stock: 4647TLV2711CDBVRG4 Datasheet

Current PartRFQ

TLV2711CDBVR

Texas InstrumentsIn Stock: 4747TLV2711CDBVR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2711CDBVRG4 is determined by electrical and mechanical parameter equivalence. The critical parameters that define substitutability are:

Electrical Parameters:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 0.025 V/µs
• Gain Bandwidth Product: 65 kHz
• Current - Input Bias: 1 pA
• Voltage - Input Offset: 450 µV
• Current - Supply: 13 µA
• Current - Output / Channel: 50 mA
• Voltage - Supply Span: 2.7 V to 10 V
• Operating Temperature: 0°C to 70°C

Mechanical Parameters:

• Mounting Type: Surface Mount
• Package / Case: SC-74A, SOT-753
• Supplier Device Package: SOT-23-5

The substitute part TLV2711CDBVR maintains identical electrical specifications and mechanical packaging, with the primary distinction being product status and packaging format availability.

Parameter Comparison

Engineering Selection Recommendations

The TLV2711CDBVR is a direct functional equivalent to the TLV2711CDBVRG4. All electrical parameters, mechanical specifications, and compliance certifications are identical. The primary distinction is product status: the TLV2711CDBVRG4 is discontinued at DiGi Electronics, while the TLV2711CDBVR maintains active status with current inventory availability.

Both parts are manufactured by Texas Instruments within the LinCMOS™ series and carry identical RoHS3 compliance and REACH unaffected designations. The TLV2711CDBVR is available in both Cut Tape and Digi-Reel® packaging formats, providing flexibility for different procurement and assembly requirements.

For applications currently specified with TLV2711CDBVRG4, direct substitution with TLV2711CDBVR is supported without circuit modification or re-qualification, provided the packaging format is compatible with the assembly process.

Frequently Asked Questions (FAQ)

Q: Can TLV2711CDBVR be used as a direct replacement for TLV2711CDBVRG4?

A: Yes. Both parts are electrically and mechanically identical. All performance parameters, supply voltage ranges, output characteristics, and thermal specifications match exactly. The primary difference is product status and packaging availability.

Q: What is the difference between the TLV2711CDBVRG4 and TLV2711CDBVR part numbers?

A: The suffix designations indicate packaging format and distribution channel. The TLV2711CDBVRG4 was supplied in Digi-Reel® format and is now discontinued. The TLV2711CDBVR is available in both Cut Tape and Digi-Reel® formats and maintains active production status.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and Moisture Sensitivity Level 1 (Unlimited) ratings. No additional qualification is required for substitution.

Q: What is the SOT-23-5 package compatibility?

A: Both parts use the SOT-23-5 package, also designated as SC-74A or SOT-753. This is a five-pin surface mount package with identical pin configuration, footprint, and soldering requirements. PCB layouts and assembly processes require no modification.

Q: Is the TLV2711CDBVR suitable for the same operating temperature range?

A: Yes. Both parts operate across 0°C to 70°C. No thermal re-rating or derating is necessary when substituting between these parts.

Q: What supply voltage range is supported by the substitute part?

A: The TLV2711CDBVR operates across 2.7 V to 10 V, identical to the TLV2711CDBVRG4. Applications designed for this voltage range require no modification.

Q: Are there inventory or lead time considerations?

A: The TLV2711CDBVR maintains active production status with current inventory availability. The TLV2711CDBVRG4 is discontinued and no longer available through standard distribution channels.