SN75C3232ED RS232 Transceiver Equivalent & Substitute Parts

Part Overview

The SN75C3232ED is a 2/2 full-duplex RS232 transceiver manufactured by Texas Instruments in a 16-SOIC surface mount package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part operates across a 3V to 5.5V supply range with a 1Mbps data rate and 300mV receiver hysteresis, suitable for legacy serial communication applications requiring full RS232 protocol compliance.

Key Parameters

Parameter	Value
Manufacturer Part Number	SN75C3232ED
Manufacturer	Texas Instruments
Category	Interface
Type	Transceiver
Protocol	RS232
Number of Drivers/Receivers	2/2
Duplex	Full
Data Rate	1Mbps
Voltage - Supply	3V ~ 5.5V
Operating Temperature	0°C ~ 70°C
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Receiver Hysteresis	300 mV
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the SN75C3232ED is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

Protocol: RS232 full-duplex transceiver
Number of Drivers/Receivers: 2/2 configuration
Package: 16-SOIC form factor (0.154", 3.90mm Width)
Voltage Supply Range: 3V ~ 5.5V
Mounting Type: Surface Mount

Acceptable Variation Parameters:

Data Rate: Minimum 1Mbps (higher rates acceptable)
Receiver Hysteresis: 300mV or 500mV (both acceptable)
Operating Temperature: Extended ranges acceptable for industrial applications
Moisture Sensitivity Level: Variations acceptable based on application requirements
Product Status: Active parts preferred for production continuity

Substitute parts are grouped into three categories: direct equivalents (matching all critical parameters), upgrades (enhanced specifications), and manufacturer-recommended alternatives (functionally compatible with minor specification differences).

Parameter Comparison

Part Number	Manufacturer	Product Status	Data Rate	Operating Temp	Receiver Hysteresis	Packaging	Inventory
SN75C3232ED	Texas Instruments	Obsolete	1Mbps	0°C ~ 70°C	300 mV	16-SOIC	821 Pcs
SN65C3232EDR	Texas Instruments	Active	1Mbps	-40°C ~ 85°C	300 mV	16-SOIC	20400 Pcs
SP3232EUCN-L/TR	MaxLinear, Inc.	Active	1Mbps	0°C ~ 70°C	300 mV	16-SOIC	32900 Pcs
ST3232EBDR	STMicroelectronics	Active	250kbps	-40°C ~ 85°C	500 mV	16-SOIC	17776 Pcs
ICL3232CBNZ	Renesas Electronics	Active	250kbps	0°C ~ 70°C	300 mV	16-SOIC	9884 Pcs
ICL3232CBNZ-T	Renesas Electronics	Active	250kbps	0°C ~ 70°C	300 mV	16-SOIC	1321 Pcs
ICL3232ECBNZ	Renesas Electronics	Active	250kbps	0°C ~ 70°C	500 mV	16-SOIC	2342 Pcs
ICL3232ECBNZ-T	Renesas Electronics	Active	250kbps	0°C ~ 70°C	500 mV	16-SOIC	17795 Pcs
ICL3232EIBNZ	Renesas Electronics	Active	250kbps	-40°C ~ 85°C	500 mV	16-SOIC	2063 Pcs
ICL3232EIBNZ-T	Renesas Electronics	Active	250kbps	-40°C ~ 85°C	500 mV	16-SOIC	35200 Pcs
ICL3232IBNZ	Renesas Electronics	Active	250kbps	-40°C ~ 85°C	300 mV	16-SOIC	1364 Pcs

Engineering Selection Recommendations

Direct Equivalent (Preferred for Drop-In Replacement): SN65C3232EDR from Texas Instruments is the direct equivalent, maintaining identical electrical specifications while offering extended operating temperature range (-40°C to 85°C) and active product status. This part is manufactured by the original supplier and carries ROHS3 compliance with unlimited moisture sensitivity rating.

Alternative from MaxLinear: SP3232EUCN-L/TR provides functional equivalence with matching 1Mbps data rate and 300mV receiver hysteresis. Operating temperature matches the original part (0°C to 70°C). This option offers high inventory availability and RoHS compliance.

Extended Temperature Range Options: ICL3232EIBNZ and ICL3232EIBNZ-T from Renesas Electronics support -40°C to 85°C operating range, suitable for industrial applications requiring wider temperature tolerance. Both maintain 2/2 full-duplex RS232 configuration with 16-SOIC packaging and ROHS3 compliance.

Selection Criteria:

For direct replacement in existing designs: SN65C3232EDR
For high-volume production with extended temperature requirements: ICL3232EIBNZ-T
For alternative sourcing: SP3232EUCN-L/TR
All recommended parts maintain ROHS3 compliance and REACH unaffected status

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower data rate than the original SN75C3232ED? A: Yes. The SN75C3232ED operates at 1Mbps, but substitute parts rated at 250kbps are functionally compatible for applications not requiring the full 1Mbps bandwidth. The lower data rate does not prevent operation in legacy serial communication systems.

Q: What is the difference between 300mV and 500mV receiver hysteresis? A: Receiver hysteresis determines the voltage differential required for input signal transitions. Both 300mV and 500mV ratings are acceptable for RS232 protocol compliance. Higher hysteresis (500mV) provides improved noise immunity in electrically noisy environments.

Q: Are all substitute parts pin-compatible with the SN75C3232ED? A: Yes. All listed substitute parts use the 16-SOIC package with identical pinout configuration, enabling direct PCB replacement without layout modifications.

Q: Which substitute part offers the best inventory availability? A: ICL3232EIBNZ-T from Renesas Electronics has the highest inventory level at 35,200 pieces, followed by SP3232EUCN-L/TR at 32,900 pieces.

Q: Can I use parts with extended operating temperature ranges in applications designed for 0°C to 70°C? A: Yes. Parts rated for -40°C to 85°C are fully compatible with applications requiring only 0°C to 70°C operation. Extended temperature ratings provide additional design margin without functional impact.

Q: What packaging options are available for substitute parts? A: Substitute parts are available in Tube, Cut Tape (CT) & Digi-Reel, and Tape & Reel (TR) packaging. Selection depends on production volume and assembly process requirements.

Q: Are all substitute parts RoHS compliant? A: Yes. All listed substitute parts carry either ROHS3 or RoHS compliance certification, meeting environmental and regulatory requirements for electronic component manufacturing.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message