MP2624GL-Z Equivalent & Substitute Parts

Part Overview

The MP2624GL-Z is a single-cell lithium iron phosphate (LiFePO₄) battery charger IC manufactured by Monolithic Power Systems Inc. in a 22-QFN (3x4) surface mount package. This active product integrates charging control, fault protection, and I2C interface functionality for portable power applications. Alternative part numbers may be required due to packaging availability, inventory constraints, or supply chain considerations while maintaining identical electrical and mechanical specifications.

Substiute Parts

MP2624GL-Z

Monolithic Power Systems Inc.In Stock: 18930MP2624GL-Z Datasheet

Current PartRFQ

MP2624GL-P

Monolithic Power Systems Inc.In Stock: 2942MP2624GL-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP2624GL-Z has one parametric equivalent: MP2624GL-P. Substitution eligibility is determined by the following criteria:

Electrical Parameters (Must Match Exactly):

• Battery chemistry: Lithium Iron Phosphate
• Number of cells: 1
• Maximum charge current: 4.5A
• Battery pack voltage: 4.2V
• Maximum supply voltage: 7V
• Interface type: I2C
• Programmable features: Timer
• Fault protection: Over Current, Over Voltage

Mechanical Parameters (Must Match Exactly):

• Package type: 22-PowerVFQFN
• Supplier device package: 22-QFN (3x4)
• Mounting type: Surface Mount

Compliance & Status (Must Match Exactly):

• Product status: Active
• RoHS compliance: ROHS3 Compliant
• REACH status: REACH Unaffected

The only difference between MP2624GL-Z and MP2624GL-P is the packaging format: MP2624GL-Z is supplied as loose components, while MP2624GL-P is supplied in Tape & Reel (TR) format. Both parts are manufactured by Monolithic Power Systems Inc. and share the identical base product number MP2624.

Parameter Comparison

Engineering Selection Recommendations

Both MP2624GL-Z and MP2624GL-P are active products manufactured by Monolithic Power Systems Inc. with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on procurement and assembly requirements:

MP2624GL-Z is appropriate for applications requiring loose component packaging, manual assembly processes, or small-volume production runs.

MP2624GL-P is appropriate for high-volume automated assembly operations where Tape & Reel packaging provides handling efficiency and cost optimization.

Both parts are electrically and mechanically identical and will function identically in the same circuit design. The choice between them is a supply chain and manufacturing process decision, not a technical performance decision.

Frequently Asked Questions (FAQ)

Q: Can MP2624GL-P be used as a direct replacement for MP2624GL-Z?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: MP2624GL-Z is supplied loose, while MP2624GL-P is supplied in Tape & Reel format. They will perform identically in the same circuit.

Q: What does the packaging format difference mean for my assembly process?

A: Loose component packaging (MP2624GL-Z) is suitable for manual pick-and-place or low-volume assembly. Tape & Reel packaging (MP2624GL-P) is optimized for automated high-speed assembly equipment and reduces handling time in production environments.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts share identical electrical specifications: 4.5A maximum charge current, 4.2V battery pack voltage, 7V maximum supply voltage, I2C interface, and identical fault protection features.

Q: Do both parts have the same thermal and reliability characteristics?

A: Yes. Both parts are manufactured by Monolithic Power Systems Inc. using the same die and process technology. They have identical Moisture Sensitivity Level (MSL 1) and thermal performance.

Q: Which part should I specify for a new design?

A: Specify based on your manufacturing process. For automated assembly, specify MP2624GL-P (Tape & Reel). For manual assembly or prototyping, specify MP2624GL-Z (loose components). Both are active products with full availability.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant and REACH unaffected. They carry identical regulatory status and certifications.