BCP51TA Equivalent & Substitute Parts

Part Overview

The BCP51TA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-223-3 package. This component operates at a maximum collector current of 1 A with a collector-emitter breakdown voltage of 45 V and a maximum power dissipation of 2 W. The device is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level rating.

Substitute parts become necessary when the primary component experiences supply discontinuation, extended lead times, inventory constraints, or when design requirements permit operation within the electrical and mechanical parameters of alternative manufacturers' offerings. The BCP51TA maintains compatibility with several equivalent PNP transistors across multiple manufacturers when electrical specifications remain within acceptable operating ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	1	A
Voltage - Collector Emitter Breakdown (Max)	45	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 50mA, 500mA	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) Min @ Ic, Vce	40 @ 150mA, 2V	—
Power - Max	2	W
Frequency - Transition	125	MHz
Operating Temperature Range	-65 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	SOT-223-3	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the BCP51TA is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: PNP configuration required
Current - Collector (Ic) Max: Must equal or exceed 1 A
Voltage - Collector Emitter Breakdown: Must equal or exceed 45 V
Power - Max: Must equal or exceed 2 W
Mounting Type: Surface Mount required
Package Compatibility: SOT-223 family packages acceptable

Secondary Compatibility Factors:

Vce Saturation characteristics within specified test conditions
DC Current Gain (hFE) minimum specifications
Operating temperature range coverage
RoHS3 compliance and MSL rating

Substitute parts are grouped into two categories:

Direct Equivalents: Parts maintaining identical electrical specifications (1 A collector current, 45 V breakdown voltage, 2 W power rating) with compatible SOT-223 packaging. These include BCP51-16,115, BCP51-16,135, and BCP51,115 from Nexperia USA Inc., and BCP5116H6327XTSA1 from Infineon Technologies.

Functional Alternatives: Parts exceeding the BCP51TA specifications in one or more parameters while maintaining compatibility with the primary application requirements. These include FZT591TA (60 V breakdown, 150 MHz transition frequency), FZT790A (3 A collector current, 40 V breakdown), NJT4030PT1G and NJT4030PT3G (3 A collector current, 40 V breakdown, 160 MHz transition frequency), and 2STN2540 (5 A collector current, 40 V breakdown).

Parameter Comparison

Part Number	Manufacturer	Ic Max (A)	Vce Breakdown (V)	Power Max (W)	Frequency (MHz)	Package	Product Status
BCP51TA	Diodes Incorporated	1	45	2	125	SOT-223-3	Active
FZT591TA	Diodes Incorporated	1	60	2	150	SOT-223-3	Active
BCP5116H6327XTSA1	Infineon Technologies	1	45	2	125	PG-SOT223-4-24	Last Time Buy
2STN2540	STMicroelectronics	5	40	1.6	—	SOT-223	Active
BCP51,115	Nexperia USA Inc.	1	45	1	145	SOT-223	Active
BCP51-10,135	Nexperia USA Inc.	1	45	1	145	SOT-223	Active
BCP51-16,115	Nexperia USA Inc.	1	45	1	145	SOT-223	Active
BCP51-16,135	Nexperia USA Inc.	1	45	1	145	SOT-223	Active
FZT790A	onsemi	3	40	2	100	SOT-223-4	Active
NJT4030PT1G	onsemi	3	40	2	160	SOT-223	Active
NJT4030PT3G	onsemi	3	40	2	160	SOT-223	Active

Engineering Selection Recommendations

Tier 1 - Direct Substitutes (Preferred):

BCP51-16,115 and BCP51-16,135 from Nexperia USA Inc. maintain identical electrical specifications to the BCP51TA (1 A collector current, 45 V breakdown voltage) with Active product status and AEC-Q100 automotive qualification. These parts are suitable for direct replacement in applications where the 1 W power rating is acceptable. Both components carry full RoHS3 compliance and unlimited MSL rating.

FZT591TA from Diodes Incorporated provides enhanced voltage margin (60 V breakdown versus 45 V) and higher transition frequency (150 MHz versus 125 MHz) while maintaining 1 A collector current and 2 W power rating. This part is Active status and suitable for applications requiring improved voltage headroom.

Tier 2 - Functional Alternatives (Higher Current Capability):

FZT790A, NJT4030PT1G, and NJT4030PT3G are suitable for applications where collector current requirements may exceed 1 A. These parts provide 3 A maximum collector current with 2 W power rating and 40 V breakdown voltage. All three maintain Active product status with full RoHS3 compliance. FZT790A operates at 100 MHz transition frequency, while NJT4030PT1G and NJT4030PT3G operate at 160 MHz.

Tier 3 - Higher Current Alternative:

2STN2540 from STMicroelectronics provides 5 A collector current capability with 40 V breakdown voltage and 1.6 W power rating. This part is suitable only for applications where the reduced power rating and lower voltage rating are acceptable trade-offs for significantly higher current capability.

Avoid:

BCP5116H6327XTSA1 from Infineon Technologies carries Last Time Buy product status, indicating discontinued manufacturing. This part should not be selected for new designs or long-term production requirements.

Frequently Asked Questions (FAQ)

Q: Can FZT591TA replace BCP51TA in all applications?

A: FZT591TA is electrically compatible with BCP51TA for applications operating at or below 45 V collector-emitter voltage. The higher 60 V breakdown rating provides additional safety margin. Both parts maintain 1 A collector current and 2 W power rating. The primary difference is packaging format (Cut Tape versus Tape & Reel) and transition frequency (150 MHz versus 125 MHz). Verify packaging requirements before substitution.

Q: What is the difference between BCP51-16,115 and BCP51-16,135?

A: Both parts are manufactured by Nexperia USA Inc. and maintain identical electrical specifications: 1 A collector current, 45 V breakdown voltage, 145 MHz transition frequency, and 1 W power rating. Both carry AEC-Q100 automotive qualification and Active product status. The designation suffix indicates internal manufacturing or date code variations. Either part is suitable for direct substitution of BCP51TA where the 1 W power rating is acceptable.

Q: Why does 2STN2540 have lower power rating than BCP51TA?

A: 2STN2540 is rated at 1.6 W maximum power dissipation compared to BCP51TA at 2 W. This part is designed for higher current applications (5 A versus 1 A) and lower voltage operation (40 V versus 45 V). The reduced power rating reflects the different thermal design and package optimization for high-current operation. This part is suitable only for applications where current requirements exceed 1 A and voltage requirements do not exceed 40 V.

Q: Are all substitute parts RoHS3 compliant?

A: All substitute parts listed carry RoHS3 compliance status. All parts also maintain MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: What is the significance of AEC-Q100 qualification on Nexperia parts?

A: AEC-Q100 qualification indicates the part meets automotive industry reliability and quality standards. BCP51,115, BCP51-10,135, BCP51-16,115, and BCP51-16,135 from Nexperia USA Inc. carry this qualification, making them suitable for automotive applications. The BCP51TA from Diodes Incorporated does not carry this designation.

Q: Can higher-current parts like FZT790A or NJT4030 series be used in place of BCP51TA?

A: FZT790A, NJT4030PT1G, and NJT4030PT3G provide 3 A collector current capability, exceeding BCP51TA requirements. These parts are electrically compatible for applications designed for 1 A operation, as they will operate within their safe operating area at reduced current levels. However, the lower voltage rating (40 V versus 45 V) must be considered. These parts are suitable only for applications where the 40 V breakdown voltage provides adequate margin above the maximum operating voltage.

Q: What packaging differences exist between substitute parts?

A: BCP51TA is supplied in SOT-223-3 package format (Tape & Reel). Substitute parts use SOT-223, SOT-223-3, SOT-223-4, or PG-SOT223-4-24 package designations. All are surface mount packages compatible with standard pick-and-place assembly equipment. Verify PCB footprint compatibility before substitution, as SOT-223-4 variants include an additional pin compared to SOT-223-3.

Q: Why is BCP5116H6327XTSA1 marked as Last Time Buy?

A: Last Time Buy status indicates the manufacturer (Infineon Technologies) has discontinued production of this part. Existing inventory may be available, but no future production is planned. This part should not be selected for new designs or applications requiring long-term component availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message