ZXTP2012ASTOA Equivalent & Substitute Parts

Part Overview

The ZXTP2012ASTOA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 60 V collector-emitter breakdown voltage and 3.5 A maximum collector current. This device is packaged in an E-Line (TO-92 compatible) through-hole configuration and is designed for general-purpose switching and amplification applications requiring 1 W power dissipation capability.

The ZXTP2012ASTOA has reached obsolete product status. Locating equivalent or substitute components is necessary to support ongoing production requirements, field repairs, and design continuity. Active alternatives with identical or compatible electrical and mechanical specifications are available from both Diodes Incorporated and alternative manufacturers.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Voltage - Collector Emitter Breakdown (Max)	60	V
Current - Collector (Ic) (Max)	3.5	A
Power - Max	1	W
Frequency - Transition	120	MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 1A, 1V	—
Vce Saturation (Max) @ Ib, Ic	210 mV @ 400 mA, 4 A	—
Operating Temperature Range	-55 to 150	°C
Mounting Type	Through Hole	—
Package / Case	E-Line-3	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitute parts for the ZXTP2012ASTOA are classified into two categories based on electrical and mechanical compatibility:

Direct Manufacturer Substitutes (Diodes Incorporated): Parts ZXTP2012A and ZXTP2012ASTZ maintain identical electrical specifications across all critical parameters: 60 V breakdown voltage, 3.5 A maximum collector current, 1 W power rating, 120 MHz transition frequency, and -55°C to 150°C operating temperature range. These parts differ only in packaging format (Bulk and Cut Tape respectively) and product status (Active). Both are pin-compatible through-hole E-Line (TO-92 compatible) devices.

Parametric Equivalent Substitutes (onsemi): Parts KSA708YTA and KSA708CYTA are manufacturer-recommended alternatives from onsemi. These devices share the same 60 V breakdown voltage and through-hole TO-92-3 package configuration. However, they operate at reduced maximum collector current (700 mA versus 3.5 A), lower power dissipation (800 mW versus 1 W), and lower transition frequency (50 MHz versus 120 MHz). These substitutes are suitable only for applications where the lower current and frequency ratings are acceptable.

Substitution eligibility is determined by the following key parameters: transistor type (PNP), collector-emitter breakdown voltage (60 V), package type (through-hole E-Line/TO-92 compatible), and operating temperature range (-55°C to 150°C minimum).

Parameter Comparison

Parameter	ZXTP2012ASTOA	ZXTP2012A	ZXTP2012ASTZ	KSA708YTA	KSA708CYTA
Manufacturer	Diodes Incorporated	Diodes Incorporated	Diodes Incorporated	onsemi	onsemi
Product Status	Obsolete	Active	Active	Active	Last Time Buy
Transistor Type	PNP	PNP	PNP	PNP	PNP
Voltage - Collector Emitter Breakdown (Max)	60 V	60 V	60 V	60 V	60 V
Current - Collector (Ic) (Max)	3.5 A	3.5 A	3.5 A	700 mA	700 mA
Power - Max	1 W	1 W	1 W	800 mW	800 mW
Frequency - Transition	120 MHz	120 MHz	120 MHz	50 MHz	50 MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	100 @ 1A, 1V	100 @ 1A, 1V	100 @ 1A, 1V	120 @ 50mA, 2V	120 @ 500mA, 2V
Vce Saturation (Max) @ Ib, Ic	210 mV @ 400 mA, 4 A	210 mV @ 400 mA, 4 A	210 mV @ 400 mA, 4 A	700 mV @ 50 mA, 500 mA	700 mV @ 50 mA, 500 mA
Operating Temperature Range	-55 to 150 °C	-55 to 150 °C	-55 to 150 °C	to 150 °C	to 150 °C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	E-Line-3	E-Line-3	E-Line-3, Formed Leads	TO-92-3	TO-92-3
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

ZXTP2012A and ZXTP2012ASTZ are the primary substitutes for the obsolete ZXTP2012ASTOA. Both parts are manufactured by Diodes Incorporated and maintain 100% electrical compatibility across all specified parameters. ZXTP2012A is available in Bulk packaging with 25,400 units in stock and Active product status. ZXTP2012ASTZ is available in Cut Tape (CT) packaging with 23,200 units in stock and Active product status. Selection between these two should be based on packaging requirements and supply chain logistics. Both parts carry ROHS3 compliance and are suitable for direct substitution in existing designs without circuit modification.

For Current-Limited Applications (Reduced Performance Substitutes):

KSA708YTA and KSA708CYTA are onsemi alternatives suitable only for applications where maximum collector current does not exceed 700 mA and transition frequency requirements do not exceed 50 MHz. KSA708YTA is in Active product status with 35,200 units in stock. KSA708CYTA is in Last Time Buy status with 5,953 units in stock. These parts share the 60 V breakdown voltage and through-hole package compatibility but operate at reduced power and frequency ratings. Use of these substitutes requires circuit analysis to confirm that application requirements fall within the reduced electrical specifications.

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, consistent with the original ZXTP2012ASTOA device.

Frequently Asked Questions (FAQ)

Q: Can ZXTP2012A be used as a direct replacement for ZXTP2012ASTOA?

A: Yes. ZXTP2012A is a direct electrical and mechanical equivalent. Both devices are PNP transistors with 60 V breakdown voltage, 3.5 A maximum collector current, 1 W power rating, 120 MHz transition frequency, and identical operating temperature range. The primary difference is product status (ZXTP2012A is Active) and packaging format (Bulk). Pin configuration and electrical performance are identical.

Q: What is the difference between ZXTP2012A and ZXTP2012ASTZ?

A: Both parts are electrically identical with matching specifications. The difference is packaging: ZXTP2012A is supplied in Bulk format, while ZXTP2012ASTZ is supplied in Cut Tape (CT) format with formed leads. Selection depends on assembly process requirements and supply chain preferences. Both are Active products with high inventory availability.

Q: Can KSA708YTA replace ZXTP2012ASTOA in all applications?

A: No. KSA708YTA is a parametric equivalent only for applications where maximum collector current does not exceed 700 mA (versus 3.5 A for ZXTP2012ASTOA) and transition frequency does not exceed 50 MHz (versus 120 MHz). Applications requiring the full 3.5 A current rating or 120 MHz frequency performance must use ZXTP2012A or ZXTP2012ASTZ. Circuit analysis is required to confirm KSA708YTA suitability.

Q: Are all substitute parts RoHS compliant?

A: Yes. ZXTP2012A, ZXTP2012ASTZ, KSA708YTA, and KSA708CYTA are all ROHS3 compliant. The original ZXTP2012ASTOA is also ROHS3 compliant. All parts are REACH Unaffected.

Q: What is the package compatibility between ZXTP2012ASTOA and KSA708YTA?

A: Both devices use through-hole packages compatible with TO-92-3 pinout. ZXTP2012ASTOA uses E-Line-3 (TO-92 compatible) packaging, while KSA708YTA uses TO-92-3 (TO-226AA) packaging. Both packages are mechanically and electrically compatible for through-hole PCB mounting with identical pin assignments.

Q: Why is ZXTP2012ASTOA marked as Obsolete?

A: ZXTP2012ASTOA has reached end-of-life status. Active alternatives with identical specifications (ZXTP2012A and ZXTP2012ASTZ) are available from the same manufacturer. Existing inventory of ZXTP2012ASTOA (973 units) remains available, but new designs should specify ZXTP2012A or ZXTP2012ASTZ for long-term supply assurance.

Q: What is the inventory status of substitute parts?

A: ZXTP2012A has 25,400 units in stock (Active status). ZXTP2012ASTZ has 23,200 units in stock (Active status). KSA708YTA has 35,200 units in stock (Active status). KSA708CYTA has 5,953 units in stock (Last Time Buy status). ZXTP2012A and ZXTP2012ASTZ offer the highest supply assurance for long-term applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message