ZXT2M322TA Equivalent & Substitute Parts

Part Overview

The ZXT2M322TA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 3.5A maximum collector current. This component is designed for surface mount applications in the 3-MLP/DFN (2x2) package format. The part is currently classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Key Parameters

Parameter	Value
Transistor Type	PNP
Voltage - Collector Emitter Breakdown (Max)	20 V
Current - Collector (Ic) (Max)	3.5 A
Power - Max	3 W
Frequency - Transition	180 MHz
Vce Saturation (Max) @ Ib, Ic	300mV @ 350mA, 3.5A
DC Current Gain (hFE) (Min) @ Ic, Vce	150 @ 2A, 2V
Operating Temperature Range	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ZXT2M322TA is determined by the following critical electrical parameters: PNP transistor type, 20V collector-emitter breakdown voltage rating, and surface mount packaging. Substitute parts must maintain these core specifications to ensure functional compatibility within existing circuit designs.

The substitution logic is organized into two categories:

Direct Electrical Equivalents: Parts that maintain identical or superior electrical ratings across all key parameters including collector current, power dissipation, transition frequency, and saturation voltage characteristics.

Functional Equivalents with Enhanced Ratings: Parts that exceed the ZXT2M322TA specifications in one or more parameters (such as collector current or power rating) while maintaining the 20V voltage rating and PNP configuration. These parts are suitable for applications where the original specifications are met or exceeded.

All substitute parts listed are surface mount devices with RoHS3 compliance and MSL 1 rating, ensuring compatibility with modern manufacturing and environmental standards.

Parameter Comparison

Parameter	ZXT2M322TA	ZXTP718MATA	NSS20500UW3T2G	PBSS5620PA,115
Manufacturer	Diodes Incorporated	Diodes Incorporated	onsemi	Nexperia USA Inc.
Product Status	Obsolete	Active	Active	Active
Transistor Type	PNP	PNP	PNP	PNP
Voltage - Collector Emitter Breakdown (Max)	20 V	20 V	20 V	20 V
Current - Collector (Ic) (Max)	3.5 A	3.5 A	5 A	6 A
Power - Max	3 W	3 W	875 mW	2.1 W
Frequency - Transition	180 MHz	180 MHz	100 MHz	80 MHz
Vce Saturation (Max) @ Ib, Ic	300mV @ 350mA, 3.5A	300mV @ 350mA, 3.5A	260mV @ 400mA, 4A	350mV @ 300mA, 6A
DC Current Gain (hFE) (Min) @ Ic, Vce	150 @ 2A, 2V	150 @ 2A, 2V	200 @ 2A, 2V	190 @ 2A, 2V
Operating Temperature Range	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	3-PowerSMD, Flat Leads	3-UDFN	3-WDFN Exposed Pad	3-PowerUDFN
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

ZXTP718MATA (Diodes Incorporated): This part is the primary direct equivalent to the ZXT2M322TA. It maintains identical electrical specifications including 3.5A collector current, 3W power rating, 180MHz transition frequency, and 300mV saturation voltage. The ZXTP718MATA is active in production with 35,200 units in stock, providing supply continuity. The package format differs (DFN2020B-3 versus 3-MLP/DFN), requiring PCB layout verification. This substitution is suitable for new designs and production runs where package footprint compatibility can be accommodated.

NSS20500UW3T2G (onsemi): This part provides enhanced collector current rating (5A versus 3.5A) and improved saturation voltage characteristics (260mV at 4A). The transition frequency is reduced to 100MHz, which may impact high-frequency applications. Power rating is 875mW, below the ZXT2M322TA specification. This part is active with 29,744 units in stock. Selection of this part is appropriate for applications where the 3.5A current requirement is marginal and higher current capability provides design margin, provided the 100MHz frequency limitation is acceptable.

PBSS5620PA,115 (Nexperia USA Inc.): This part offers the highest collector current rating (6A) among available substitutes. Power rating is 2.1W, below the original specification. Transition frequency is 80MHz, the lowest among alternatives. This part is active with 4,100 units in stock. Selection is appropriate for applications prioritizing current handling capability over frequency response, with design verification required for the reduced power rating and transition frequency.

All substitute parts maintain the 20V voltage rating, PNP configuration, RoHS3 compliance, and MSL 1 rating required for compatibility with modern manufacturing standards and environmental regulations.

Frequently Asked Questions (FAQ)

Q: Can ZXTP718MATA be used as a direct replacement for ZXT2M322TA?

A: ZXTP718MATA maintains identical electrical specifications (3.5A, 20V, 3W, 180MHz, 300mV saturation). However, the package format differs (DFN2020B-3 versus 3-MLP/DFN). PCB footprint compatibility must be verified before implementation. If the footprint is compatible or can be accommodated through PCB redesign, this part provides direct electrical substitution.

Q: What are the key differences between the substitute parts?

A: ZXTP718MATA provides direct electrical equivalence. NSS20500UW3T2G offers higher collector current (5A) but reduced power rating (875mW) and transition frequency (100MHz). PBSS5620PA,115 provides the highest collector current (6A) but the lowest power rating (2.1W) and transition frequency (80MHz). Selection depends on application requirements for current, power dissipation, and frequency response.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (ZXTP718MATA, NSS20500UW3T2G, and PBSS5620PA,115) are ROHS3 compliant with MSL 1 rating, ensuring compatibility with current manufacturing standards and environmental regulations.

Q: What is the impact of package format differences?

A: The ZXT2M322TA uses 3-MLP/DFN (2x2) packaging. ZXTP718MATA uses DFN2020B-3, NSS20500UW3T2G uses 3-WDFN (2x2), and PBSS5620PA,115 uses 3-HUSON (2x2). While all are surface mount packages with similar footprint dimensions, PCB layout and thermal management characteristics may differ. Physical footprint verification is required before PCB implementation.

Q: Which substitute part should be selected for high-frequency applications?

A: ZXTP718MATA maintains the 180MHz transition frequency of the original part, making it the appropriate choice for high-frequency applications. NSS20500UW3T2G (100MHz) and PBSS5620PA,115 (80MHz) have reduced frequency capabilities and are not suitable for applications requiring 180MHz performance.

Q: Can NSS20500UW3T2G be used in applications requiring 3.5A continuous current?

A: NSS20500UW3T2G is rated for 5A maximum collector current, exceeding the 3.5A requirement. However, the power rating is 875mW, below the ZXT2M322TA specification of 3W. Applications requiring sustained 3.5A operation at elevated temperatures may exceed the thermal limits of this part. Thermal analysis is required to confirm suitability.

Q: What is the inventory status of substitute parts?

A: ZXTP718MATA has 35,200 units in stock (highest availability). NSS20500UW3T2G has 29,744 units in stock. PBSS5620PA,115 has 4,100 units in stock (lowest availability). Supply chain planning should account for these inventory levels when selecting substitutes for production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message