ZXMS6004N8Q-13 Equivalent & Substitute Parts

Part Overview

The ZXMS6004N8Q-13 is an N-Channel power switch/driver IC from Diodes Incorporated's INTELLIFET® series, designed for low-side switching applications. This active product operates at supply voltages of 3.3V and 5V with a maximum output current of 1.3A and a maximum load voltage of 60V. The device is qualified to AEC-Q101 automotive standards and packaged in 8-SOIC format with Tape & Reel distribution. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or packaging format preferences while maintaining identical electrical and mechanical performance.

Substiute Parts

ZXMS6004N8Q-13

Diodes IncorporatedIn Stock: 10387ZXMS6004N8Q-13 Datasheet

Current PartRFQ

ZXMS6004N8-13

Diodes IncorporatedIn Stock: 20495ZXMS6004N8-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ZXMS6004N8-13 qualifies as a parametric equivalent to the ZXMS6004N8Q-13 based on strict electrical and mechanical compatibility. Both parts share identical core specifications: N-Channel low-side switching configuration, 1.3A maximum output current, 60V maximum load voltage, 3.3V and 5V supply voltage support, 350mOhm typical on-resistance, non-inverting input, and identical fault protection features (current limiting, over-temperature, and over-voltage protection). Both devices operate across the same temperature range (-40°C to 125°C) and are housed in the 8-SOIC package with 0.154" width and 3.90mm dimensions. The primary distinction between these parts is packaging format: the ZXMS6004N8Q-13 is supplied in Tape & Reel format, while the ZXMS6004N8-13 is available in Cut Tape and Digi-Reel® formats. Both maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and identical base product number ZXMS6004.

Parameter Comparison

Engineering Selection Recommendations

Both the ZXMS6004N8Q-13 and ZXMS6004N8-13 are active products from Diodes Incorporated with identical electrical specifications and mechanical compatibility. Selection between these parts should be based on packaging and distribution format requirements. The ZXMS6004N8Q-13 in Tape & Reel format is suitable for high-volume automated assembly operations. The ZXMS6004N8-13 in Cut Tape and Digi-Reel® formats accommodates lower-volume applications or manual assembly processes. Both parts maintain ROHS3 compliance and are qualified to AEC-Q101 automotive standards, ensuring equivalent reliability and regulatory compliance across automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Are ZXMS6004N8Q-13 and ZXMS6004N8-13 electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including output current (1.3A), load voltage (60V), supply voltage (3.3V, 5V), on-resistance (350mOhm), and fault protection features. They operate across the same temperature range and share identical pin configurations in the 8-SOIC package.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. ZXMS6004N8Q-13 is supplied in Tape & Reel format for high-volume automated assembly. ZXMS6004N8-13 is available in Cut Tape and Digi-Reel® formats for lower-volume or manual assembly applications. All other specifications remain identical.

Q: Can I substitute ZXMS6004N8-13 for ZXMS6004N8Q-13 in my design?

A: Yes, provided your assembly process accommodates the Cut Tape or Digi-Reel® packaging format. The electrical and mechanical specifications are identical, and both parts are AEC-Q101 qualified for automotive applications.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ZXMS6004N8Q-13 and ZXMS6004N8-13 are AEC-Q101 qualified and carry automotive grade designation, making them suitable for automotive power management and switching applications.

Q: What does MSL 1 (Unlimited) mean for these parts?

A: MSL 1 indicates the lowest moisture sensitivity level, meaning these parts have unlimited shelf life and do not require special moisture control during storage or handling, simplifying inventory management and logistics.