ZXMS6004DN8Q-13 Equivalent & Substitute Parts

Part Overview

The ZXMS6004DN8Q-13 is an N-Channel power switch/driver IC from Diodes Incorporated's INTELLIFET® series, designed for low-side switching applications. This 8-SOIC packaged component delivers 1.3A maximum output current with 350mOhm typical on-resistance, operating across 3.3V and 5V supply voltages with a maximum load voltage rating of 60V. The device is automotive-grade (AEC-Q101 qualified) and currently in active production status. Substitute parts are identified to address inventory availability, packaging preferences, or specific output configuration requirements while maintaining electrical compatibility.

Substiute Parts

ZXMS6004DN8Q-13

Diodes IncorporatedIn Stock: 2713ZXMS6004DN8Q-13 Datasheet

Current PartRFQ

ZXMS6004DN8-13

Diodes IncorporatedIn Stock: 13072ZXMS6004DN8-13 Datasheet

Parametric EquivalentRFQ

ZXMS6004N8-13

Diodes IncorporatedIn Stock: 20495ZXMS6004N8-13 Datasheet

Parametric EquivalentRFQ

ZXMS6004N8Q-13

Diodes IncorporatedIn Stock: 10387ZXMS6004N8Q-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ZXMS6004DN8Q-13 are identified based on strict electrical and mechanical parameter matching within the INTELLIFET® product family. All substitutes share the following critical parameters: N-Channel low-side output configuration, 1:1 input-to-output ratio, 60V maximum load voltage, 3.3V/5V supply voltage compatibility, 1.3A maximum output current, 350mOhm typical on-resistance, non-inverting input type, on/off interface, auto restart feature, and identical fault protection (current limiting, over temperature, over voltage). All substitutes maintain the same operating temperature range (-40°C to 125°C), surface mount mounting type, and 8-SOIC package footprint.

Substitutes differ in two controlled parameters: number of outputs (either 1 or 2) and packaging format (Cut Tape & Digi-Reel® versus Tape & Reel). The ZXMS6004DN8Q-13 features 2 outputs in Cut Tape & Digi-Reel® packaging. Substitutes with 1 output (ZXMS6004N8-13 and ZXMS6004N8Q-13) are electrically compatible for applications requiring single-output switching. The ZXMS6004N8Q-13 maintains automotive-grade qualification (AEC-Q101) and Tape & Reel packaging, while ZXMS6004DN8-13 and ZXMS6004N8-13 are available in standard Cut Tape & Digi-Reel® packaging.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and full RoHS3 compliance, ensuring long-term availability and environmental regulatory adherence. Selection between substitutes depends on specific application requirements:

For automotive applications requiring AEC-Q101 qualification, the ZXMS6004N8Q-13 is the appropriate substitute when single-output configuration is acceptable. This part maintains automotive-grade designation and AEC-Q101 qualification identical to the main part, with Tape & Reel packaging suitable for high-volume production environments.

For applications requiring dual-output capability with standard packaging, the ZXMS6004DN8-13 provides electrical equivalence with Cut Tape & Digi-Reel® packaging. This part is suitable for non-automotive applications or where automotive qualification is not mandated.

For single-output applications without automotive qualification requirements, the ZXMS6004N8-13 offers the same electrical performance with standard Cut Tape & Digi-Reel® packaging and maximum inventory availability.

All parts share identical electrical specifications, thermal performance, and protection features. Selection should be based on output count requirements, packaging format compatibility with assembly processes, and automotive qualification necessity.

Frequently Asked Questions (FAQ)

Q: Can ZXMS6004N8-13 or ZXMS6004N8Q-13 replace ZXMS6004DN8Q-13 in a dual-output application?

A: No. The ZXMS6004N8-13 and ZXMS6004N8Q-13 feature single-output configuration, while the ZXMS6004DN8Q-13 provides dual outputs. Substitution is only valid for applications requiring single-output switching. Dual-output applications must use ZXMS6004DN8Q-13 or ZXMS6004DN8-13.

Q: What is the difference between Cut Tape & Digi-Reel® and Tape & Reel packaging?

A: Cut Tape & Digi-Reel® packaging is suitable for lower-volume or mixed-component assembly processes, while Tape & Reel (TR) packaging is optimized for high-volume automated production lines. Both formats contain identical components; packaging selection depends on manufacturing process requirements.

Q: Is ZXMS6004N8-13 suitable for automotive applications?

A: ZXMS6004N8-13 does not carry automotive-grade designation or AEC-Q101 qualification. For automotive applications, use ZXMS6004DN8Q-13 or ZXMS6004N8Q-13, both of which are AEC-Q101 qualified.

Q: Are all substitutes pin-compatible with the main part?

A: All substitutes use identical 8-SOIC package footprint (0.154", 3.90mm width) and surface mount mounting type. Pin compatibility depends on specific circuit design and output configuration requirements. Single-output variants (ZXMS6004N8-13, ZXMS6004N8Q-13) have different pin assignments than dual-output variants (ZXMS6004DN8Q-13, ZXMS6004DN8-13).

Q: Do all parts have the same electrical performance specifications?

A: Yes. All substitutes share identical maximum load voltage (60V), supply voltage range (3.3V, 5V), maximum output current (1.3A), on-resistance (350mOhm typical), operating temperature range (-40°C to 125°C), and fault protection features (current limiting, over temperature, over voltage).

Q: Which substitute has the highest inventory availability?

A: ZXMS6004N8-13 has 20,400 pieces in stock, followed by ZXMS6004DN8-13 with 13,000 pieces and ZXMS6004N8Q-13 with 10,300 pieces.