ZOR-25-T-52-0R Equivalent & Substitute Parts

Part Overview

The ZOR-25-T-52-0R is a 0 Ohms jumper resistor manufactured by YAGEO, designed for through-hole axial applications requiring 0.25W (1/4W) power dissipation. This carbon film composition resistor operates across a temperature range of -55°C to 155°C and is ROHS3 compliant. As an active product with 955 units in stock, equivalent alternatives are available from other manufacturers for supply chain flexibility and design redundancy.

Substiute Parts

ZOR-25-T-52-0R

YAGEOIn Stock: 966ZOR-25-T-52-0R Datasheet

Current PartRFQ

CD14ZT0R00

Stackpole Electronics IncIn Stock: 84325CD14ZT0R00 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ZOR-25-T-52-0R is determined by the following critical parameters:

• Resistance value: 0 Ohms (exact match required)
• Power rating: 0.25W minimum
• Package configuration: Axial through-hole
• Composition: Carbon film
• Operating temperature range: -55°C to 155°C minimum
• Compliance: ROHS3 and REACH requirements

The CD14ZT0R00 from Stackpole Electronics Inc meets all substitution criteria. Physical dimensions vary slightly (0.236" L vs 0.248" L), but both conform to standard axial package specifications and are functionally interchangeable in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ZOR-25-T-52-0R and CD14ZT0R00 are active products with full regulatory compliance. Selection between these parts should be based on:

• Inventory availability: CD14ZT0R00 has significantly higher stock (84,259 units vs 955 units)
• Lead time requirements: Stackpole variant offers supply chain redundancy
• PCB layout constraints: Minor length difference (0.248" vs 0.236") may affect board routing in space-constrained designs
• Supplier preference: Both manufacturers maintain consistent quality standards for this product category

Frequently Asked Questions (FAQ)

Q: Can CD14ZT0R00 be used as a direct replacement for ZOR-25-T-52-0R?

A: Yes. Both parts share identical electrical specifications (0 Ohms, 0.25W, -55°C to 155°C operating range) and are ROHS3/REACH compliant. The 0.012" length difference is within standard axial package tolerances and does not affect electrical performance or PCB compatibility in standard through-hole applications.

Q: Are there any mechanical compatibility issues between these parts?

A: No. Both parts use standard axial package geometry with 0.091" diameter leads. The minor length variation does not impact lead spacing, hole alignment, or soldering procedures.

Q: What is the significance of the "Jumper" tolerance designation?

A: Jumper tolerance indicates these are 0 Ohm resistors used for circuit bridging and signal routing rather than precision resistance applications. Both parts are functionally equivalent in this role.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both ZOR-25-T-52-0R and CD14ZT0R00 are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.