ZMSML0130P00SMC Equivalent & Substitute Parts

Part Overview

The ZMSML0130P00SMC is a snap-action SPDT switch manufactured by C&K, designed for chassis mount applications with solder lug termination. This switch is rated for 100mA DC at 12V and features IP65 ingress protection suitable for dust-tight and water-resistant environments. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

ZMSML0130P00SMC

C&KIn Stock: 846ZMSML0130P00SMC Datasheet

Current PartRFQ

ZMSMH0130P00SMC

C&KIn Stock: 978ZMSMH0130P00SMC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ZMSML0130P00SMC is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom)
• Current rating (100mA DC)
• Voltage rating (12V DC)
• Actuator type (Round Pin Plunger)
• Mounting type (Chassis Mount)
• Termination style (Solder Lug)
• Ingress protection rating (IP65)
• Operating force (130gf)
• Release force (13gf)
• Operating position (0.266" / 6.75mm)
• Operating temperature range (-40°C to 85°C)
• Electrical life (300,000 Cycles)

The ZMSMH0130P00SMC meets all these criteria and belongs to the same ZMSM series, making it a direct functional equivalent. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The ZMSMH0130P00SMC is the direct substitute for the obsolete ZMSML0130P00SMC. Both parts are manufactured by C&K within the ZMSM series and maintain identical electrical and mechanical specifications across all critical parameters.

The ZMSMH0130P00SMC carries Active product status, ensuring continued availability and supply chain support. It meets ROHS3 compliance, representing current regulatory standards. The packaging difference (Tray versus standard) does not affect functional compatibility and is a procurement consideration only.

Selection of the ZMSMH0130P00SMC is appropriate for direct replacement in applications currently using the ZMSML0130P00SMC, with no circuit redesign or mechanical modification required.

Frequently Asked Questions (FAQ)

Q: Can ZMSMH0130P00SMC directly replace ZMSML0130P00SMC in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. No circuit or mechanical changes are required.

Q: What is the difference between these two part numbers?

A: The primary differences are product status (Obsolete versus Active) and packaging format (Standard versus Tray). Electrical and mechanical specifications are identical.

Q: Why is the original part marked as obsolete?

A: Product obsolescence is a manufacturer lifecycle decision. The ZMSMH0130P00SMC provides continued access to equivalent functionality within the same ZMSM series.

Q: Are there compliance differences between the two parts?

A: Both parts are RoHS compliant. The ZMSMH0130P00SMC carries ROHS3 certification, reflecting current regulatory requirements. Both are REACH Unaffected and classified as EAR99.

Q: Does packaging affect electrical performance?

A: No. Tray packaging is a logistics and handling consideration only. Electrical and mechanical performance remains identical.

Q: What is the inventory status for these parts?

A: ZMSML0130P00SMC has 822 pieces in stock (Obsolete status). ZMSMH0130P00SMC has 874 pieces in stock (Active status).