ZMSML0130P00PMC Equivalent & Substitute Parts

Part Overview

The ZMSML0130P00PMC is a snap-action SPDT switch manufactured by C&K, designed for through-hole mounting applications requiring 100mA DC at 12V operation. This component features a round pin plunger actuator with IP65 ingress protection, suitable for dust-tight and water-resistant environments. The part is currently classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Substiute Parts

ZMSML0130P00PMC

C&KIn Stock: 1174ZMSML0130P00PMC Datasheet

Current PartRFQ

ZMSMH0130P00PMC

C&KIn Stock: 888ZMSMH0130P00PMC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ZMSML0130P00PMC is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Momentary)
• Current rating (100mA DC)
• Voltage rating (12V DC)
• Actuator type (Round pin plunger)
• Mounting type (Through hole)
• Termination style (PC pin)
• Ingress protection rating (IP65)
• Operating force (130gf)
• Operating temperature range (-40°C to 85°C)
• Electrical life (300,000 cycles)

The ZMSMH0130P00PMC meets all substitution criteria as a functionally equivalent part within the same ZMSM series, differing only in packaging configuration and product status classification.

Parameter Comparison

Engineering Selection Recommendations

The ZMSMH0130P00PMC is the direct functional equivalent for ZMSML0130P00PMC replacement. Both parts maintain identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: ZMSMH0130P00PMC is classified as active, ensuring continued availability and supply chain support, whereas ZMSML0130P00PMC is obsolete.

ZMSMH0130P00PMC carries ROHS3 compliance certification, providing enhanced regulatory alignment compared to the standard RoHS compliance of the original part. Both parts maintain REACH unaffected status and identical moisture sensitivity classification (MSL 1).

Packaging differs between the two parts: ZMSML0130P00PMC uses standard packaging while ZMSMH0130P00PMC is supplied in tray packaging. This distinction affects procurement and handling procedures but does not impact functional performance or electrical characteristics.

Frequently Asked Questions (FAQ)

Q: Can ZMSMH0130P00PMC directly replace ZMSML0130P00PMC in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all functional parameters including circuit configuration, current and voltage ratings, actuator type, mounting method, and operating characteristics. Direct substitution is supported without design modification.

Q: What is the significance of the product status difference?

A: ZMSML0130P00PMC is classified as obsolete, indicating discontinued production and limited availability. ZMSMH0130P00PMC is active, ensuring ongoing manufacturing and reliable supply chain access for new procurements and design implementations.

Q: How does packaging affect component selection?

A: ZMSML0130P00PMC uses standard packaging while ZMSMH0130P00PMC is supplied in tray packaging. Packaging selection impacts receiving, storage, and handling procedures but does not affect electrical performance, mechanical fit, or functional operation.

Q: Are there compliance differences between these parts?

A: Both parts maintain REACH unaffected status and identical moisture sensitivity levels. ZMSMH0130P00PMC carries ROHS3 certification while ZMSML0130P00PMC carries standard RoHS compliance. Both meet applicable regulatory requirements for their respective product classifications.

Q: What inventory considerations apply to these parts?

A: ZMSML0130P00PMC has 1,082 pieces available as new original stock. ZMSMH0130P00PMC has 849 pieces available. For new designs and ongoing procurement, ZMSMH0130P00PMC is recommended due to active product status and continued manufacturing support.