Z8F0213PB005SC Equivalent & Substitute Parts

Part Overview

The Z8F0213PB005SC is an eZ8 Encore® XP® 8-bit microcontroller manufactured by Zilog, featuring 2KB FLASH program memory, 512 bytes of RAM, and integrated peripherals including UART/USART, PWM, and watchdog timer functionality. This device operates at 5MHz with a supply voltage range of 2.7V to 3.6V and is housed in an 8-DIP through-hole package.

The Z8F0213PB005SC carries an obsolete product status. Locating equivalent substitute parts is necessary for ongoing system support, maintenance, and new production runs where original inventory becomes unavailable or depleted.

Substiute Parts

Z8F0213PB005SC

ZilogIn Stock: 1189Z8F0213PB005SC Datasheet

Current PartRFQ

Z8F0213PB005SG

ZilogIn Stock: 1145Z8F0213PB005SG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Z8F0213PB005SC is determined by strict equivalence across the following critical parameters:

• Core processor architecture (eZ8)
• Core size (8-Bit)
• Operating frequency (5MHz)
• Program memory capacity and type (2KB FLASH)
• RAM capacity (512 x 8)
• Supply voltage range (2.7V ~ 3.6V)
• I/O count (6 pins)
• Connectivity features (IrDA, UART/USART)
• Peripheral set (Brown-out Detect/Reset, LED, POR, PWM, WDT)
• Package type and form factor (8-DIP through-hole)
• Operating temperature range (0°C ~ 70°C)

The Z8F0213PB005SG meets all substitution criteria as a direct equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The Z8F0213PB005SG is a direct functional equivalent to the Z8F0213PB005SC with identical electrical and mechanical specifications. The primary distinction is product lifecycle status: the Z8F0213PB005SC is obsolete, while the Z8F0213PB005SG maintains active production status.

The Z8F0213PB005SG additionally carries ROHS3 compliance certification, whereas the Z8F0213PB005SC is RoHS non-compliant. For applications subject to RoHS regulatory requirements, the Z8F0213PB005SG is the appropriate selection. Both parts share identical REACH and ECCN classifications.

Packaging differs between the two parts: the Z8F0213PB005SC uses standard packaging, while the Z8F0213PB005SG is supplied in tube packaging. This distinction affects handling and storage procedures but does not impact electrical or mechanical compatibility.

Frequently Asked Questions (FAQ)

Q: Can Z8F0213PB005SG replace Z8F0213PB005SC in existing designs?

A: Yes. The Z8F0213PB005SG is electrically and mechanically identical to the Z8F0213PB005SC across all functional parameters, including core architecture, memory configuration, I/O count, peripheral set, package type, and operating specifications. Direct substitution is supported without design modification.

Q: What is the difference between these two part numbers?

A: The parts are functionally equivalent. Differences exist in product status (obsolete vs. active), RoHS compliance level (non-compliant vs. ROHS3 compliant), and packaging format (standard vs. tube). The suffix designations (SC vs. SG) reflect these distinctions.

Q: Are there any compatibility concerns with the 8-DIP package?

A: No. Both parts use identical 8-DIP through-hole packaging with 0.300" (7.62mm) pitch. PCB footprints, pin assignments, and mechanical mounting are fully compatible.

Q: Does the tube packaging of Z8F0213PB005SG affect performance?

A: No. Packaging format affects only handling, storage, and logistics. Electrical performance and functional characteristics remain identical regardless of packaging type.

Q: Which part should be selected for new production?

A: The Z8F0213PB005SG is recommended for new production due to active product status and ROHS3 compliance certification. The Z8F0213PB005SC, being obsolete, is suitable only for maintenance and repair of existing systems where original parts are required.