Z84C0010PEC Equivalent & Substitute Parts

Part Overview

The Z84C0010PEC is a Z80 microprocessor IC manufactured by Zilog, featuring a single 8-bit core operating at 10MHz in a 40-pin DIP package. This component is classified as obsolete, reflecting its legacy status in embedded systems design. The Z80 architecture remains relevant in industrial control, legacy system maintenance, and specialized embedded applications where 8-bit processing is sufficient. Identifying equivalent substitute parts is essential for procurement continuity, system redesign, and long-term component availability planning.

Substiute Parts

Z84C0010PEC

ZilogIn Stock: 2074Z84C0010PEC Datasheet

Current PartRFQ

Z84C0010PEG

ZilogIn Stock: 2001Z84C0010PEG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Z84C0010PEC is determined by strict equivalence across the following critical parameters:

• Core Processor Architecture: Z80 (identical instruction set and pinout compatibility)
• Bus Width: 1 Core, 8-Bit (functional equivalence)
• Operating Speed: 10MHz (clock frequency match)
• Voltage Supply: 5.0V (electrical compatibility)
• Operating Temperature Range: -40°C ~ 100°C (thermal envelope match)
• Package Type: 40-DIP / 40-PDIP (mechanical and pin compatibility)
• Mounting Configuration: Through Hole (PCB assembly compatibility)

The Z84C0010PEG qualifies as a direct substitute based on identical alignment across all these parameters. The primary distinction lies in product status and compliance certifications rather than functional or electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The Z84C0010PEG is a direct functional equivalent to the Z84C0010PEC. Both components share identical electrical specifications, thermal operating ranges, and mechanical packaging. The Z84C0010PEG is classified as Active product status, ensuring ongoing availability and supply chain continuity compared to the obsolete Z84C0010PEC.

The Z84C0010PEG achieves ROHS3 compliance, whereas the Z84C0010PEC is RoHS non-compliant. This distinction is significant for applications subject to environmental regulations or procurement policies requiring RoHS-compliant components. Both parts maintain identical REACH and ECCN classifications, indicating equivalent regulatory treatment for export and hazardous substance considerations.

Selection between these parts should be based on regulatory requirements, supply availability, and system design constraints. The Z84C0010PEG is the preferred choice for new designs and systems requiring RoHS compliance. The Z84C0010PEC remains suitable for legacy system maintenance where RoHS compliance is not mandated.

Frequently Asked Questions (FAQ)

Q: Are Z84C0010PEC and Z84C0010PEG pin-compatible?

A: Yes. Both components use the 40-PDIP package with identical pinout. Direct PCB substitution is possible without layout modifications.

Q: What is the functional difference between these parts?

A: There is no functional difference. Both are Z80 microprocessors with identical core architecture, clock speed, voltage requirements, and thermal specifications. Differences exist only in product status and RoHS compliance certification.

Q: Can I use Z84C0010PEG in a design originally specified for Z84C0010PEC?

A: Yes. The Z84C0010PEG is a direct substitute. Electrical and mechanical compatibility is complete. Verify that your system design does not explicitly prohibit RoHS-compliant components.

Q: Why is Z84C0010PEC marked as obsolete?

A: Obsolete status reflects Zilog's discontinuation of this specific part number. The Z80 architecture itself remains in production under alternative part numbers, including Z84C0010PEG.

Q: What packaging options are available?

A: Both parts are supplied in 40-DIP through-hole packages. Z84C0010PEC is supplied in standard packaging, while Z84C0010PEG is supplied in Tube packaging. Both are suitable for through-hole PCB assembly.

Q: Are there temperature or voltage derating considerations?

A: Both parts operate across the identical temperature range (-40°C ~ 100°C) and voltage specification (5.0V). No derating differences exist between the two parts.

Q: What is the moisture sensitivity level?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.