Z0603C102FSMST Ferrite Bead Equivalent & Substitute Parts

Part Overview

The Z0603C102FSMST is a 1 kOhm signal line ferrite bead manufactured by KEMET in 0603 (1608 Metric) surface mount package. This component operates at 100 MHz impedance with a maximum current rating of 300mA and DC resistance of 350mOhm. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value
Impedance @ Frequency	1 kOhms @ 100 MHz
Filter Type	Signal Line
Number of Lines	1
Current Rating (Max)	300mA
DC Resistance (DCR) (Max)	350mOhm
Package / Case	0603 (1608 Metric)
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the Z0603C102FSMST is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Impedance @ Frequency: 1 kOhms @ 100 MHz
Package / Case: 0603 (1608 Metric)
Number of Lines: 1
Operating Temperature Range: -55°C ~ 125°C
Mounting Type: Surface Mount
RoHS3 Compliance

Allowable Parameter Variations:

Current Rating (Max): Substitute parts rated at 600mA exceed the original 300mA specification and are acceptable for direct replacement
DC Resistance (DCR) (Max): Substitute parts with 300mOhm or 350mOhm DCR are within acceptable tolerance
Filter Type: Signal Line substitutes are primary equivalents; Power Line variants (HPZ series) are listed but represent functional category differences

All identified substitute parts meet the mandatory matching criteria and maintain full electrical and mechanical compatibility with the original Z0603C102FSMST specification.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Impedance @ 100 MHz	Current Rating (Max)	DCR (Max)	Filter Type	Package	Product Status	Height (Max)
Z0603C102FSMST	KEMET	1 kOhms	300mA	350mOhm	Signal Line	0603 (1608 Metric)	Obsolete	0.037" (0.95mm)
742792662	Würth Elektronik	1 kOhms	600mA	300mOhm	Signal Line	0603 (1608 Metric)	Active	0.039" (1.00mm)
BLM18HE102SN1D	Murata Electronics	1 kOhms	600mA	350mOhm	Signal Line	0603 (1608 Metric)	Active	0.037" (0.95mm)
BLM18HE102SZ1D	Murata Electronics	1 kOhms	600mA	350mOhm	Signal Line	0603 (1608 Metric)	Active	0.037" (0.95mm)
HPZ1608D102-R60TF	Shenzhen Sunlord Electronics Co., Ltd.	1 kOhms	600mA	350mOhm	Power Line	0603 (1608 Metric)	Active	0.037" (0.95mm)
HPZ1608E102-R60TF	Shenzhen Sunlord Electronics Co., Ltd.	1 kOhms	600mA	350mOhm	Power Line	0603 (1608 Metric)	Active	0.037" (0.95mm)

Engineering Selection Recommendations

Primary Substitutes (Signal Line Category):

The Murata Electronics BLM18HE102SN1D and BLM18HE102SZ1D represent the closest functional equivalents to the Z0603C102FSMST. Both parts are active products with identical impedance, package dimensions, and height specifications. The increased current rating (600mA vs. 300mA) provides design margin without introducing compatibility issues. These parts carry ROHS3 compliance and MSL 1 rating matching the original specification.

The Würth Elektronik 742792662 offers an alternative signal line solution with superior current capacity (600mA) and reduced DC resistance (300mOhm). Height specification of 0.039" represents a 0.04mm increase from the original, which remains within typical PCB assembly tolerances for 0603 components.

Secondary Substitutes (Power Line Category):

The Shenzhen Sunlord Electronics HPZ1608D102-R60TF and HPZ1608E102-R60TF maintain electrical equivalence but are classified as power line ferrite beads rather than signal line. These parts are suitable for applications where power line filtering is required. The HPZ1608D102-R60TF is supplied in Tape & Reel packaging, while HPZ1608E102-R60TF is available in Cut Tape & Digi-Reel format.

Product Status Consideration:

All substitute parts listed carry active product status, ensuring long-term availability and supply chain continuity compared to the obsolete Z0603C102FSMST.

Frequently Asked Questions (FAQ)

Q: Can BLM18HE102SN1D and BLM18HE102SZ1D be used interchangeably with Z0603C102FSMST?

A: Yes. Both Murata parts meet all mandatory matching parameters: 1 kOhms @ 100 MHz impedance, 0603 package, single signal line configuration, and -55°C to 125°C operating temperature. The increased current rating (600mA) and identical height specification (0.037") ensure direct compatibility.

Q: What is the difference between the Würth Elektronik 742792662 and Murata BLM18HE parts?

A: The Würth part features lower DC resistance (300mOhm vs. 350mOhm) and slightly increased height (0.039" vs. 0.037"). Both are signal line ferrite beads with 600mA current rating. Selection depends on PCB assembly height constraints and DC resistance requirements for the specific application.

Q: Why are HPZ1608D102-R60TF and HPZ1608E102-R60TF listed as substitutes if they are power line beads?

A: These Shenzhen Sunlord parts maintain electrical equivalence in impedance, frequency, package, and current rating. The power line classification indicates optimized performance characteristics for power distribution applications. They are listed as parametric equivalents but represent a functional category variation from the original signal line specification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 Compliant status, matching the environmental compliance requirement of the original Z0603C102FSMST.

Q: What is the significance of MSL 1 rating on these ferrite beads?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake requirements. All parts in this comparison, including the original and all substitutes, carry MSL 1 rating, eliminating moisture handling concerns during storage and assembly.

Q: Does the increased current rating of substitute parts affect circuit performance?

A: No. Higher current ratings indicate greater thermal margin and lower insertion loss at rated current levels. The 600mA-rated substitutes are fully backward compatible with circuits designed for 300mA operation.

Q: What packaging options are available for these substitutes?

A: Murata BLM18HE102SN1D and BLM18HE102SZ1D are supplied in Cut Tape & Digi-Reel format. Würth Elektronik 742792662 is available in Cut Tape & Digi-Reel. Shenzhen Sunlord HPZ1608D102-R60TF is supplied in Tape & Reel, while HPZ1608E102-R60TF is available in Cut Tape & Digi-Reel format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message