Z0402C330CSMST Equivalent & Substitute Parts

Part Overview

The Z0402C330CSMST is a 33 Ohm ferrite bead manufactured by KEMET in the 0402 (1005 Metric) surface mount package. This single-line signal ferrite bead operates at 33 Ohms impedance at 100 MHz with a maximum current rating of 400mA and 300mOhm DC resistance. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility within the specified electrical and mechanical parameters.

Key Parameters

Parameter	Value
Impedance @ 100 MHz	33 Ohms
Package / Case	0402 (1005 Metric)
Current Rating (Max)	400mA
DC Resistance (Max)	300mOhm
Filter Type	Signal Line
Number of Lines	1
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the Z0402C330CSMST is determined by the following critical parameters:

Primary Matching Criteria:

Package / Case: 0402 (1005 Metric) surface mount form factor
Number of Lines: Single line configuration
Operating Temperature Range: -55°C ~ 125°C
RoHS3 Compliance and MSL Level 1 rating

Secondary Compatibility Parameters:

Impedance @ 100 MHz: 33 Ohms (exact match) or 30-32 Ohms (within acceptable tolerance for signal line applications)
Current Rating: Equal to or greater than 400mA
DC Resistance: Lower values indicate improved performance characteristics
Filter Type: Signal Line or Power Line (power line variants acceptable for signal line applications)

Substitute parts are grouped into two categories: exact impedance matches (33 Ohms) and near-impedance equivalents (30-32 Ohms). All substitutes maintain the 0402 package footprint and surface mount configuration, ensuring mechanical and electrical compatibility.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Impedance @ 100 MHz	Current Rating (Max)	DC Resistance (Max)	Filter Type	Product Status	Height (Max)
Z0402C330CSMST	KEMET	33 Ohms	400mA	300mOhm	Signal Line	Obsolete	0.022" (0.55mm)
BBNQ00100505300Y00	Pulse Electronics	30 Ohms	400mA	250mOhm	Signal Line	Active	0.024" (0.60mm)
BBSJ00100505300Y00	Pulse Electronics	30 Ohms	500mA	200mOhm	Signal Line	Active	0.024" (0.60mm)
BBSY00100505300Y00	Pulse Electronics	30 Ohms	500mA	200mOhm	Signal Line	Active	0.024" (0.60mm)
BBSY00100505320Y00	Pulse Electronics	32 Ohms	500mA	200mOhm	Signal Line	Active	0.024" (0.60mm)
BBSY00100505330Y00	Pulse Electronics	33 Ohms	500mA	200mOhm	Signal Line	Active	0.024" (0.60mm)
GZ1005U300CTF	Shenzhen Sunlord Electronics Co., Ltd.	30 Ohms	700mA	60mOhm	Signal Line	Active	0.026" (0.65mm)
MMZ1005D330CT000	TDK Corporation	33 Ohms	400mA	240mOhm	Signal Line	Active	0.022" (0.55mm)
MPZ1005D330ET000	TDK Corporation	33 Ohms	800mA	180mOhm	Power Line	Active	0.022" (0.55mm)
MPZ1005D330ETD25	TDK Corporation	33 Ohms	800mA	180mOhm	Power Line	Active	0.022" (0.55mm)
SZ1005G300TF	Shenzhen Sunlord Electronics Co., Ltd.	30 Ohms	600mA	150mOhm	Signal Line	Active	0.026" (0.65mm)

Engineering Selection Recommendations

Exact Impedance Match (33 Ohms) - Preferred Category:

The following active parts provide exact impedance matching to the Z0402C330CSMST:

BBSY00100505330Y00 (Pulse Electronics): Active status with 500mA current rating and 200mOhm DC resistance. Represents the most direct functional equivalent with enhanced current capacity.
MMZ1005D330CT000 (TDK Corporation): Active status with matching 400mA current rating and 240mOhm DC resistance. Maintains identical height profile (0.022") to the original part.
MPZ1005D330ET000 and MPZ1005D330ETD25 (TDK Corporation): Active status with 800mA current rating and 180mOhm DC resistance. Power line classification provides additional margin for signal line applications.

Near-Impedance Equivalents (30-32 Ohms) - Secondary Category:

These parts operate within acceptable impedance tolerance for signal line ferrite bead applications:

BBSY00100505320Y00 (Pulse Electronics): 32 Ohms impedance with 500mA current rating and 200mOhm DC resistance.
BBNQ00100505300Y00, BBSJ00100505300Y00, BBSY00100505300Y00 (Pulse Electronics): 30 Ohms impedance with current ratings from 400mA to 500mA.
GZ1005U300CTF and SZ1005G300TF (Shenzhen Sunlord Electronics Co., Ltd.): 30 Ohms impedance with enhanced current ratings (700mA and 600mA respectively) and reduced DC resistance.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and -55°C ~ 125°C operating temperature range. Selection should prioritize parts with active product status and inventory availability for long-term supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can I use a 30 Ohm ferrite bead as a substitute for the 33 Ohm Z0402C330CSMST?

A: Yes. The 30 Ohm variants (BBNQ00100505300Y00, BBSJ00100505300Y00, BBSY00100505300Y00, GZ1005U300CTF, SZ1005G300TF) are functionally compatible for signal line applications. The 3 Ohm impedance difference falls within acceptable tolerance for ferrite bead filtering characteristics in typical signal line circuits.

Q: What is the difference between signal line and power line ferrite beads?

A: Signal line ferrite beads are optimized for lower current applications with emphasis on EMI suppression. Power line ferrite beads (MPZ1005D330ET000, MPZ1005D330ETD25) are designed for higher current capacity and lower DC resistance. Power line variants are acceptable substitutes for signal line applications due to their superior electrical characteristics.

Q: Does the height difference between substitute parts affect PCB assembly?

A: The Z0402C330CSMST has a maximum height of 0.022" (0.55mm). Substitute parts range from 0.022" to 0.026" in height. Height variations of 0.004" (0.10mm) are within standard PCB assembly tolerances for 0402 surface mount components and do not affect reflow soldering or component placement.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the environmental and regulatory specifications of the original Z0402C330CSMST.

Q: Which substitute offers the best current margin above the 400mA original specification?

A: The GZ1005U300CTF and MPZ1005D330ET000/MPZ1005D330ETD25 variants provide the highest current ratings at 700mA and 800mA respectively, offering the greatest margin above the original 400mA specification.

Q: Can I substitute based on DC resistance alone?

A: No. DC resistance is a secondary parameter. Primary substitution criteria are impedance at 100 MHz, package form factor (0402), and current rating. Lower DC resistance values indicate improved performance but do not override impedance matching requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message