Z0107MAG TRIAC Equivalent & Substitute Parts

Part Overview

The Z0107MAG is a logic-sensitive gate TRIAC manufactured by onsemi, rated for 600V off-state voltage and 1A on-state current in a Through Hole TO-92 package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. Direct substitutes from active manufacturers and functionally similar alternatives are available to maintain circuit performance and reliability.

Key Parameters

Parameter	Z0107MAG
Manufacturer	onsemi
Triac Type	Logic - Sensitive Gate
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	1 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	5 mA
Current - Hold (Ih) (Max)	10 mA
Operating Temperature	-40°C ~ 125°C (TJ)
Mounting Type	Through Hole
Package / Case	TO-226-3, TO-92-3 Long Body
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Triac Type: Logic - Sensitive Gate (all substitutes must match)
Voltage - Off State: 600 V (all substitutes must match)
Current - On State (It (RMS)) (Max): 1 A or higher (substitutes must meet or exceed)
Voltage - Gate Trigger (Vgt) (Max): 1.3 V (all substitutes must match)
Current - Gate Trigger (Igt) (Max): 5 mA or lower (substitutes must meet or be lower)
Current - Hold (Ih) (Max): 10 mA (all substitutes must match)
Mounting Type: Through Hole (all substitutes must match)
Package / Case: TO-92 or TO-92-3 compatible (all substitutes must match)

Direct Substitutes (Z0107MA 1AA2, Z0107MA 5AL2, Z0109MA 2AL2) meet all electrical and mechanical parameters with active product status.

Similar Substitutes (L601E5, L6X8E5, L6X8E6) maintain core electrical specifications but may have different surge current ratings or operating temperature ranges. L6X8E5 and L6X8E6 have reduced on-state current (800 mA vs. 1 A), suitable only for applications with lower current requirements.

Parameter Comparison

Parameter	Z0107MAG (Main)	Z0107MA 1AA2	Z0107MA 5AL2	Z0109MA 2AL2	L601E5	L6X8E5	L6X8E6
Manufacturer	onsemi	STMicroelectronics	STMicroelectronics	STMicroelectronics	Littelfuse Inc.	Littelfuse Inc.	Littelfuse
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
Triac Type	Logic - Sensitive Gate	Logic - Sensitive Gate	Logic - Sensitive Gate	Logic - Sensitive Gate	Logic - Sensitive Gate	Logic - Sensitive Gate	Logic - Sensitive Gate
Voltage - Off State	600 V	600 V	600 V	600 V	600 V	600 V	600 V
Current - On State (It (RMS)) (Max)	1 A	1 A	1 A	1 A	1 A	800 mA	800 mA
Voltage - Gate Trigger (Vgt) (Max)	1.3 V	1.3 V	1.3 V	1.3 V	1.3 V	1.3 V	1.3 V
Current - Gate Trigger (Igt) (Max)	5 mA	5 mA	5 mA	10 mA	5 mA	5 mA	5 mA
Current - Hold (Ih) (Max)	10 mA	10 mA	10 mA	10 mA	10 mA	10 mA	10 mA
Operating Temperature	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 110°C	-65°C ~ 110°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3	TO-226-3, TO-92-3
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Direct Substitutes (Preferred)

Z0107MA 1AA2 and Z0107MA 5AL2 from STMicroelectronics are direct functional equivalents with identical electrical specifications and active product status. Both are ROHS3 compliant and REACH unaffected. Selection between these two depends on packaging requirements: Z0107MA 1AA2 is supplied in Bulk packaging, while Z0107MA 5AL2 is supplied in Cut Tape (CT). Both maintain the same gate trigger current specification (5 mA maximum) and operating temperature range (-40°C to 125°C).

Z0109MA 2AL2 from STMicroelectronics is functionally compatible with a single parameter variance: gate trigger current (Igt) is specified at 10 mA maximum versus 5 mA for the main part. This part is active, ROHS3 compliant, and supplied in Cut Tape (CT) packaging.

Similar Substitutes (Application-Dependent)

L601E5 from Littelfuse Inc. matches all core electrical parameters and is active with ROHS3 compliance. Operating temperature range extends to -65°C, providing broader low-temperature capability. Non-repetitive surge current is higher (16.7A, 20A) compared to the main part (8A @ 60Hz).

L6X8E5 and L6X8E6 from Littelfuse are suitable only for applications where on-state current requirement does not exceed 800 mA. Both parts are active and ROHS3 compliant with extended low-temperature operation (-65°C). Operating temperature maximum is 110°C, which is 15°C lower than the main part specification.

Frequently Asked Questions (FAQ)

Q: Can Z0107MA 1AA2 or Z0107MA 5AL2 be used as direct replacements for Z0107MAG?

A: Yes. Both parts are direct functional equivalents with identical electrical specifications (600V, 1A, 1.3V gate trigger, 5mA gate trigger current, 10mA hold current) and compatible TO-92-3 packaging. Both are active products with ROHS3 compliance. Selection depends on packaging format: Bulk (Z0107MA 1AA2) or Cut Tape (Z0107MA 5AL2).

Q: What is the difference between Z0109MA 2AL2 and Z0107MA 1AA2?

A: Z0109MA 2AL2 has a maximum gate trigger current (Igt) specification of 10 mA, compared to 5 mA for Z0107MA 1AA2. All other electrical parameters are identical. This difference may affect gate drive circuit design in sensitive applications.

Q: Can L6X8E5 or L6X8E6 replace Z0107MAG in all applications?

A: No. L6X8E5 and L6X8E6 are rated for 800 mA on-state current, compared to 1A for Z0107MAG. These parts are suitable only for applications where the maximum on-state current requirement does not exceed 800 mA. Additionally, the maximum operating temperature is 110°C versus 125°C for the main part.

Q: Is L601E5 a suitable substitute for Z0107MAG?

A: Yes, for most applications. L601E5 matches all core electrical specifications and is active with ROHS3 compliance. Non-repetitive surge current is higher (16.7A, 20A), which provides additional margin. Operating temperature range extends to -65°C, suitable for broader environmental conditions.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All active substitute parts listed (Z0107MA 1AA2, Z0107MA 5AL2, Z0109MA 2AL2, L601E5, L6X8E5, L6X8E6) are ROHS3 compliant and REACH unaffected.

Q: What packaging options are available for direct substitutes?

A: Z0107MA 1AA2 is supplied in Bulk packaging. Z0107MA 5AL2 is supplied in Cut Tape (CT). Z0109MA 2AL2 is supplied in Cut Tape (CT). All three are compatible with TO-92-3 package specifications.

Q: Can I use these substitutes interchangeably in production?

A: Z0107MA 1AA2 and Z0107MA 5AL2 are fully interchangeable. Z0109MA 2AL2 is compatible with the same circuit topology but has a higher gate trigger current specification (10 mA vs. 5 mA), which may require gate drive circuit evaluation. L601E5, L6X8E5, and L6X8E6 require application-specific assessment based on current and temperature requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message