Bel Power Solutions YEV09T10-RG Equivalent & Substitute Parts Reference

Part Overview

The Bel Power Solutions YEV09T10-RG is a non-isolated Point-of-Load (PoL) DC-DC converter module designed for ITE (Commercial) applications. It features a single output with a programmable voltage range of 0.59V to 5.1V and supports a maximum output current of 10A. With an input voltage range from 4.5V to 13.8V, high efficiency, and integrated functions such as Remote On/Off, OCP, SCP, and UVLO, this through-hole 5-SIP module is RoHS3 compliant and holds an active product status. Alternative models are required when inventory constraints, multi-vendor qualification, or supply chain continuity necessitate substitute components of equivalent specification.

Substiute Parts

YEV09T10-RG

Bel Power SolutionsIn Stock: 1046YEV09T10-RG Datasheet

Current PartRFQ

LDO10C-005W05-VJ

ARTESYN / Advanced EnergyIn Stock: 2083LDO10C-005W05-VJ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Bel Power Solutions YEV09T10-RG is determined strictly by the following parameters: product status (active), type (non-isolated PoL module), number of outputs (1), input voltage range, output voltage range, maximum output current, efficiency, mounting type (through hole), package/case (5-SIP module), operating temperature range, control and feature sets, and compliance requirements (RoHS, MSL, ECCN, HTSUS). Only components matching these explicit criteria are considered valid substitutes within the non-isolated DC DC converter module category.

Parameter Comparison

Engineering Selection Recommendations

Both the Bel Power Solutions YEV09T10-RG and the ARTESYN / Advanced Energy LDO10C-005W05-VJ carry an active status with RoHS and MSL 1 (Unlimited) compliance. The ECCN and HTSUS codes are matching. Conformance to environmental and trade regulations is established in both models. Engineering selection may be based on these compliance and certification equivalencies. Selection can be performed without concern for product lifecycle or regulatory status for either model.

Frequently Asked Questions (FAQ)

Q1: What parameters must match to substitute non-isolated PoL DC DC converters?
Key parameters include product status, type, number of outputs, input/output voltage ranges, output current, efficiency, mounting type, package/case, operating temperature, control features, application category, and regulatory compliance.

Q2: Are YEV09T10-RG and LDO10C-005W05-VJ pin-compatible based on the provided information?
Both modules use a 5-SIP package and the mounting type is through-hole, indicating mechanical compatibility.

Q3: What are the main differences between YEV09T10-RG and LDO10C-005W05-VJ?
The LDO10C-005W05-VJ supports a lower minimum input voltage (3V vs. 4.5V), has a slightly higher efficiency (94% vs. 93%), and does not list OCP or UVLO in its features, but does include SCP and Remote On/Off.

Q4: Is regulatory compliance matched between the two models?
Both modules are RoHS compliant, have MSL 1 (Unlimited), and share identical ECCN and HTSUS codes.

Q5: Can either part be used in commercial ITE applications?
Both the YEV09T10-RG and LDO10C-005W05-VJ list ITE (Commercial) in their application category.