YC124-JR-07910RL Equivalent & Substitute Parts

Part Overview

The YC124-JR-07910RL is a 910 Ohm isolated 4-resistor network array manufactured by YAGEO in 0804 surface mount package with convex, long side terminals. This component is designed for applications requiring matched resistor networks with automotive-grade reliability. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements where alternative manufacturers' components meet identical electrical and mechanical specifications.

Substiute Parts

YC124-JR-07910RL

YAGEOIn Stock: 984YC124-JR-07910RL Datasheet

Current PartRFQ

EXB-28V911JX

Panasonic Electronic ComponentsIn Stock: 5171EXB-28V911JX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the YC124-JR-07910RL is determined by strict equivalence across the following critical parameters:

• Resistance value: 910 Ohm
• Tolerance: ±5%
• Circuit configuration: Isolated 4-resistor network
• Power rating per element: 62.5mW
• Temperature coefficient: ±200ppm/°C
• Package type: 0804 with convex, long side terminals
• Pin count: 8
• Surface mount capability
• RoHS3 compliance

The EXB-28V911JX from Panasonic Electronic Components meets all specified electrical and mechanical parameters and qualifies as a direct substitute for the YC124-JR-07910RL.

Parameter Comparison

Engineering Selection Recommendations

Both the YC124-JR-07910RL and EXB-28V911JX are active production components with full RoHS3 compliance and identical moisture sensitivity ratings. The parts are electrically and mechanically equivalent across all specified parameters. The EXB-28V911JX exhibits a lower maximum seated height (0.018" versus 0.022"), which may provide advantages in space-constrained applications. The YC124-JR-07910RL supports a higher maximum operating temperature (155°C versus 125°C), which may be relevant for high-temperature automotive applications. Both components carry automotive AEC-Q200 qualification. Selection between these parts should be based on specific application temperature requirements, available inventory, and PCB layout constraints related to component height.

Frequently Asked Questions (FAQ)

Q: Can the EXB-28V911JX replace the YC124-JR-07910RL in existing designs?

A: Yes. The EXB-28V911JX meets all electrical specifications (910 Ohm ±5%, 62.5mW per element, ±200ppm/°C temperature coefficient) and mechanical requirements (0804 package, 8-pin isolated configuration, surface mount). The lower seated height may require PCB layout verification in space-constrained designs.

Q: Are there differences in operating temperature ranges?

A: The YC124-JR-07910RL operates from -55°C to 155°C, while the EXB-28V911JX operates from -55°C to 125°C. Applications requiring operation above 125°C must use the YAGEO component.

Q: Do both parts have the same package footprint?

A: Both parts use the 0804 package with convex, long side terminals and identical planar dimensions (0.079" L x 0.018" W / 2.00mm x 1.00mm). The EXB-28V911JX has a lower maximum seated height (0.018" versus 0.022"), which may affect clearance in designs with tight vertical constraints.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the YC124-JR-07910RL and EXB-28V911JX carry automotive AEC-Q200 qualification and are suitable for automotive applications within their respective operating temperature ranges.

Q: What is the moisture sensitivity rating for these parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.