YC124-JR-07360RL Equivalent & Substitute Parts

Part Overview

The YC124-JR-07360RL is a 360 Ohm isolated 4-resistor network array manufactured by YAGEO in 0804 surface mount package. This component is designed for DDRAM and SDRAM applications and maintains Active product status. The part is AEC-Q200 qualified for automotive applications and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

YC124-JR-07360RL

YAGEOIn Stock: 1171YC124-JR-07360RL Datasheet

Current PartRFQ

EXB-28V361JX

Panasonic Electronic ComponentsIn Stock: 3894EXB-28V361JX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the YC124-JR-07360RL is determined by strict equivalence across the following critical parameters:

• Resistance value: 360 Ohm
• Tolerance: ±5%
• Circuit configuration: Isolated 4-resistor network
• Power rating per element: 62.5mW
• Temperature coefficient: ±200ppm/°C
• Package type: 0804 with convex, long side terminals
• Pin count: 8
• Surface mount capability
• Compliance: ROHS3, AEC-Q200 automotive qualification

The EXB-28V361JX from Panasonic Electronic Components meets all substitution criteria. Both parts share identical electrical specifications, package geometry, and automotive-grade certifications, enabling direct functional interchange in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the YC124-JR-07360RL and EXB-28V361JX are Active status components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on application-specific requirements:

The YC124-JR-07360RL supports an extended operating temperature range of -55°C to 155°C, suitable for high-temperature automotive environments. The EXB-28V361JX operates within -55°C to 125°C and features a lower seated height of 0.018" (0.45mm) compared to 0.022" (0.55mm), which may be advantageous for space-constrained PCB layouts. Both parts maintain identical electrical performance and package footprint compatibility for direct substitution in DDRAM and SDRAM applications.

Frequently Asked Questions (FAQ)

Q: Can EXB-28V361JX replace YC124-JR-07360RL in automotive applications?

A: Yes. Both parts are AEC-Q200 qualified and share identical electrical specifications (360 Ohm, ±5%, 62.5mW per element, ±200ppm/°C). The primary consideration is the operating temperature range: YC124-JR-07360RL extends to 155°C while EXB-28V361JX is rated to 125°C. Verify your application's maximum operating temperature requirement before selection.

Q: Are the package dimensions identical?

A: Both parts use 0804 surface mount packages with convex, long side terminals and identical footprints (0.079" L x 0.039" W / 2.00mm x 1.00mm). The seated height differs slightly: YC124-JR-07360RL is 0.022" (0.55mm) maximum, while EXB-28V361JX is 0.018" (0.45mm) maximum. This height difference may impact PCB clearance in space-constrained designs.

Q: Do both parts meet the same compliance standards?

A: Yes. Both YC124-JR-07360RL and EXB-28V361JX are ROHS3 compliant, REACH unaffected, and carry MSL rating 1 (Unlimited). Both are classified under ECCN EAR99 and HTSUS 8533.21.0020.

Q: What is the isolation configuration?

A: Both parts are isolated 4-resistor networks with 8 pins. Each resistor element operates independently with no internal connections between resistor networks.

Q: Are these parts suitable for DDRAM and SDRAM applications?

A: Yes. Both components are specified for DDRAM and SDRAM applications and maintain the electrical and thermal characteristics required for memory interface termination and biasing circuits.