YC124-JR-0711RL Equivalent & Substitute Parts

Part Overview

The YC124-JR-0711RL is an isolated 4-resistor network array manufactured by YAGEO, featuring 11 Ohm resistors with ±5% tolerance in a 0804 surface mount package. This component is designed for applications requiring matched resistor networks, including automotive systems compliant with AEC-Q200 standards. The part maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and functional requirements.

Substiute Parts

YC124-JR-0711RL

YAGEOIn Stock: 991YC124-JR-0711RL Datasheet

Current PartRFQ

EXB-28V110JX

Panasonic Electronic ComponentsIn Stock: 907EXB-28V110JX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the YC124-JR-0711RL is determined by strict equivalence across the following critical parameters:

• Resistance value: 11 Ohm
• Tolerance: ±5%
• Circuit configuration: Isolated 4-resistor network
• Power rating per element: 62.5mW
• Temperature coefficient: ±200ppm/°C
• Package type: 0804 with convex, long side terminals
• Pin count: 8
• Mounting: Surface mount
• Compliance: RoHS3, REACH Unaffected, EAR99

The EXB-28V110JX from Panasonic Electronic Components meets all specified electrical and mechanical parameters, enabling direct substitution in applications where the YC124-JR-0711RL is designated.

Parameter Comparison

Engineering Selection Recommendations

The EXB-28V110JX qualifies as a direct substitute for the YC124-JR-0711RL based on electrical parameter equivalence and mechanical compatibility. Both components maintain identical resistance, tolerance, power rating, and temperature coefficient specifications. Both parts carry active product status, ROHS3 compliance, and REACH unaffected designation.

The operating temperature range differs: the YC124-JR-0711RL operates from -55°C to 155°C, while the EXB-28V110JX operates from -55°C to 125°C. Applications requiring operation above 125°C must retain the YAGEO part. For applications within the -55°C to 125°C range, both parts are functionally equivalent.

The seated height of the EXB-28V110JX (0.018" / 0.45mm) is lower than the YC124-JR-0711RL (0.022" / 0.55mm), which may be advantageous in space-constrained designs but does not affect electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the EXB-28V110JX replace the YC124-JR-0711RL in all applications?

A: The EXB-28V110JX is electrically and mechanically equivalent for applications operating within -55°C to 125°C. Applications requiring operation above 125°C must use the YC124-JR-0711RL, which is rated to 155°C.

Q: Are there differences in package dimensions between these parts?

A: Both parts use the 0804 package with identical footprint dimensions (0.079" L x 0.039" W). The seated height differs slightly: YC124-JR-0711RL at 0.022" (0.55mm) and EXB-28V110JX at 0.018" (0.45mm). This does not affect PCB layout compatibility.

Q: Do both parts meet automotive qualification standards?

A: Both the YC124-JR-0711RL and EXB-28V110JX are qualified for automotive applications under AEC-Q200 standards.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Both carry unlimited moisture sensitivity rating (MSL 1).

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts feature 11 Ohm resistance with ±5% tolerance, 62.5mW power per element, ±200ppm/°C temperature coefficient, and isolated 4-resistor network configuration with 8 pins.