YB225CWCKW01/CUL-5C24-CB Equivalent & Substitute Parts

Part Overview

The YB225CWCKW01/CUL-5C24-CB is a DPDT illuminated pushbutton switch manufactured by NKK Switches, designed for panel-mount applications requiring sealed, momentary operation with visual feedback. This component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when identical electrical and mechanical parameters are maintained across the same product series, ensuring direct functional interchangeability without circuit redesign or mechanical modification.

Substiute Parts

YB225CWCKW01/CUL-5C24-CB

NKK SwitchesIn Stock: 1114YB225CWCKW01/CUL-5C24-CB Datasheet

Current PartRFQ

YB225CWCKW01-5C24-CB

NKK SwitchesIn Stock: 1101YB225CWCKW01-5C24-CB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the YB225CWCKW01/CUL-5C24-CB is determined by strict equivalence across all critical electrical and mechanical parameters. The identified substitute part YB225CWCKW01-5C24-CB maintains identical specifications in the following key areas:

Circuit topology (DPDT), switch function (On-Mom), current and voltage ratings (3A AC/DC, 125V AC, 30V DC), actuator geometry (round flush button), illumination type and voltage (LED red 24 VDC), ingress protection rating (IP65), panel cutout dimensions (22.00mm circular), operating temperature range (-25°C to 50°C), mechanical and electrical life cycles, and RoHS3 compliance status. Both parts belong to the YB2 series and share identical termination style (Solder, Quick Connect - 0.110" 2.8mm).

Parameter Comparison

Engineering Selection Recommendations

Both the YB225CWCKW01/CUL-5C24-CB and YB225CWCKW01-5C24-CB are Active product status components with full RoHS3 compliance and identical regulatory certifications (ECCN: EAR99, HTSUS: 8536.50.9031). Selection between these parts is based on inventory availability and supply chain considerations rather than technical differentiation. The main part carries 1073 pieces in stock, while the substitute carries 1019 pieces. Both parts maintain MSL Level 1 (Unlimited) moisture sensitivity classification and are suitable for direct substitution in existing designs without modification to PCB layout, panel cutout geometry, or electrical circuit parameters.

Frequently Asked Questions (FAQ)

Q: Can YB225CWCKW01-5C24-CB be used as a direct replacement for YB225CWCKW01/CUL-5C24-CB?

A: Yes. Both parts are parametrically equivalent across all electrical and mechanical specifications. No circuit redesign or mechanical modification is required.

Q: Are the panel cutout dimensions identical?

A: Yes. Both parts require a circular 22.00mm diameter panel cutout. Existing mechanical interfaces are fully compatible.

Q: Do both parts support the same illumination voltage?

A: Yes. Both parts use LED red illumination at 24 VDC nominal voltage. Illumination circuit connections are identical.

Q: What is the difference between these two part numbers?

A: The part numbers differ in formatting convention only (slash versus hyphen in the suffix designation). All functional and electrical parameters are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both parts carry ROHS3 Compliant status and meet identical environmental and regulatory requirements.

Q: Can these parts be used in applications requiring IP65 ingress protection?

A: Yes. Both parts maintain IP65 rating (Dust Tight, Water Resistant) and are suitable for sealed panel-mount applications.