YB216CWCKW01-6F-JB Equivalent & Substitute Parts

Part Overview

The YB216CWCKW01-6F-JB is an illuminated pushbutton switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with On-On switching function. This panel-mount component is designed for applications requiring 3A switching capacity at 125V AC or 30V DC with integrated LED illumination. The part is currently Active in product status with 980 units in stock. Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or equivalent functional specifications within the same product series.

Substiute Parts

YB216CWCKW01-6F-JB

NKK SwitchesIn Stock: 1005YB216CWCKW01-6F-JB Datasheet

Current PartRFQ

YB216CWCPW01-6F-JB

NKK SwitchesIn Stock: 763YB216CWCPW01-6F-JB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the YB2 series are determined by electrical and mechanical parameter equivalence. The primary substitution criteria are:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current and voltage ratings (3A at 125V AC / 30V DC)
• Mounting type and panel cutout dimensions (Panel Mount, Front; Circular 22.00mm)
• Actuator type and illumination specifications (Round button, LED green, 3.3 VDC)
• Termination style (Solder, Quick Connect - 0.110")
• Environmental ratings (IP65, Operating temperature -25°C ~ 50°C)
• Mechanical and electrical life cycles (200,000 / 100,000 cycles)
• Compliance certifications (ROHS3, REACH Unaffected)

Parts meeting all these parameters are classified as direct parametric equivalents and may be substituted without circuit redesign or mechanical re-qualification.

Parameter Comparison

Engineering Selection Recommendations

Both YB216CWCKW01-6F-JB and YB216CWCPW01-6F-JB are Active products from NKK Switches with identical electrical, mechanical, and environmental specifications. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. Selection between these parts should be based on inventory availability and supply chain requirements. The YB216CWCKW01-6F-JB maintains higher stock levels (980 units) compared to YB216CWCPW01-6F-JB (696 units), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can YB216CWCPW01-6F-JB be used as a direct replacement for YB216CWCKW01-6F-JB?

A: Yes. Both parts share identical electrical ratings (3A at 125V AC / 30V DC), circuit configuration (SPDT On-On), mechanical specifications (22mm panel cutout, round flush button), illumination characteristics (LED green, 3.3 VDC), and environmental ratings (IP65, -25°C to 50°C). No circuit redesign or mechanical re-qualification is required.

Q: Are there differences in termination or mounting between these parts?

A: No. Both parts use identical termination style (Solder, Quick Connect - 0.110" / 2.8mm) and mounting configuration (Panel Mount, Front). Panel cutout dimensions are identical at 22.00mm diameter.

Q: Do both parts meet the same compliance standards?

A: Yes. Both YB216CWCKW01-6F-JB and YB216CWCPW01-6F-JB are ROHS3 compliant and REACH unaffected. Both carry Active product status.

Q: What is the basis for substitution between these parts?

A: Substitution is based on complete electrical and mechanical parameter equivalence within the YB2 series. Identical current ratings, voltage ratings, circuit configuration, actuator type, illumination specifications, ingress protection, operating temperature range, and mechanical/electrical life cycles establish these parts as parametric equivalents.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should consider current inventory levels and supply chain availability. YB216CWCKW01-6F-JB has higher stock availability (980 units).