YB215CWCKW01-6G-JB Equivalent & Substitute Parts

Part Overview

The YB215CWCKW01-6G-JB is an illuminated pushbutton switch manufactured by NKK Switches, classified as a standard SPDT (Single Pole Double Throw) panel mount component with LED illumination. This part is currently Active in product status with 1,094 units in stock. Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application needs while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

YB215CWCKW01-6G-JB

NKK SwitchesIn Stock: 1178YB215CWCKW01-6G-JB Datasheet

Current PartRFQ

YB215CWCKW01/CUL-6G-JB

NKK SwitchesIn Stock: 949YB215CWCKW01/CUL-6G-JB Datasheet

Parametric EquivalentRFQ

YB215CWCPW01-6G-JB

NKK SwitchesIn Stock: 1028YB215CWCPW01-6G-JB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the YB215CWCKW01-6G-JB are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Circuit configuration (SPDT)
• Switch function (On-Mom momentary operation)
• Current and voltage ratings (3A AC/DC, 125V AC, 30V DC)
• Mounting type and panel cutout dimensions (Panel Mount, Front; Circular 22.00mm)
• Actuator type and color (Round, Button, Flush; Clear with White Filter/Diffuser)
• Illumination specifications (LED, Blue; 3.3 VDC nominal)
• Termination style (Solder, Quick Connect - 0.110" / 2.8mm)
• Ingress protection rating (IP65)
• Operating temperature range (-25°C ~ 50°C)
• Mechanical and electrical life ratings (1,000,000 and 100,000 cycles respectively)
• Compliance certifications (ROHS3)

All identified substitutes maintain these parameters without deviation.

Parameter Comparison

Engineering Selection Recommendations

All three parts—YB215CWCKW01-6G-JB, YB215CWCKW01/CUL-6G-JB, and YB215CWCPW01-6G-JB—are Active products manufactured by NKK Switches with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is determined by inventory availability and supply chain requirements rather than technical performance differences. The YB215CWCKW01-6G-JB maintains the highest inventory level at 1,094 units. All three parts are suitable for direct substitution in applications requiring SPDT illuminated pushbutton switches with 3A current capacity, 125V AC / 30V DC voltage ratings, IP65 ingress protection, and blue LED illumination at 3.3 VDC.

Frequently Asked Questions (FAQ)

Q: Can YB215CWCKW01/CUL-6G-JB be used as a direct replacement for YB215CWCKW01-6G-JB?

A: Yes. Both parts share identical electrical ratings (3A AC/DC, 125V AC, 30V DC), circuit configuration (SPDT), switch function (On-Mom), mounting specifications (Panel Mount, Front; 22.00mm circular cutout), actuator design (Round, Button, Flush), illumination characteristics (LED, Blue; 3.3 VDC), termination style (Solder, Quick Connect - 0.110" / 2.8mm), and environmental ratings (IP65, -25°C ~ 50°C operating range). Both are Active products with ROHS3 compliance.

Q: What is the difference between YB215CWCPW01-6G-JB and the other two substitutes?

A: YB215CWCPW01-6G-JB is electrically and mechanically identical to YB215CWCKW01-6G-JB and YB215CWCKW01/CUL-6G-JB across all specified parameters. The part number variation reflects internal NKK Switches designation but does not indicate functional differences. All three parts are interchangeable for applications meeting the specified electrical and mechanical requirements.

Q: Are all three parts suitable for panel mount applications with a 22.00mm circular cutout?

A: Yes. All three parts are specified for Panel Mount, Front installation with a Circular 22.00mm diameter panel cutout. Mechanical compatibility is identical across all three part numbers.

Q: Do all substitutes maintain the same ingress protection rating?

A: Yes. All three parts maintain IP65 ingress protection (Dust Tight, Water Resistant) and are suitable for applications requiring sealed panel mount operation.

Q: What is the basis for substitution between these three parts?

A: Substitution is based on complete equivalence across all provided electrical parameters (current, voltage, circuit configuration, switch function), mechanical parameters (mounting type, actuator design, panel cutout dimensions, termination style), environmental specifications (operating temperature, ingress protection, mechanical and electrical life ratings), and compliance certifications (ROHS3). All three parts are manufactured by NKK Switches within the YB2 series and maintain identical performance characteristics.