YB215CWCKW01-5D-JB Equivalent & Substitute Parts

Part Overview

The YB215CWCKW01-5D-JB is an illuminated pushbutton switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with momentary operation. This component is designed for panel-mount applications requiring sealed, illuminated control interfaces. The part is currently Active in product status with 1028 units in stock. Substitute parts are identified when equivalent electrical ratings, mechanical specifications, and environmental protection levels are maintained across the same product series.

Substiute Parts

YB215CWCKW01-5D-JB

NKK SwitchesIn Stock: 1138YB215CWCKW01-5D-JB Datasheet

Current PartRFQ

YB215CWCPW01-5D-JB

NKK SwitchesIn Stock: 1144YB215CWCPW01-5D-JB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the YB215CWCKW01-5D-JB is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-Mom (momentary) operation required
• Current and Voltage Ratings: 3A (AC/DC), 125V AC, 30V DC must be matched
• Illumination Specifications: LED, Amber color, 2 VDC nominal voltage
• Mechanical Interface: Panel mount, front installation, 22.00mm circular cutout, round flush button actuator
• Environmental Protection: IP65 rating (dust tight, water resistant)
• Termination: Solder and Quick Connect 0.110" (2.8mm) terminals
• Lifecycle Ratings: 1,000,000 mechanical cycles, 100,000 electrical cycles
• Compliance: ROHS3 compliant, MSL 1 (unlimited moisture sensitivity)

Parts meeting all these parameters within the YB2 series are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both YB215CWCKW01-5D-JB and YB215CWCPW01-5D-JB are Active products from NKK Switches with full ROHS3 compliance and identical electrical, mechanical, and environmental specifications. Selection between these parts should be based on inventory availability and lead time requirements. The YB215CWCPW01-5D-JB currently maintains higher stock levels (1075 units versus 1028 units), which may provide supply chain advantages for high-volume applications. Both parts are suitable for direct substitution in panel-mount illuminated control applications requiring SPDT momentary operation at 3A/125V AC ratings with IP65 environmental sealing.

Frequently Asked Questions (FAQ)

Q: Can YB215CWCPW01-5D-JB be used as a direct replacement for YB215CWCKW01-5D-JB?

A: Yes. Both parts are parametric equivalents with identical electrical ratings (3A, 125V AC, 30V DC), circuit configuration (SPDT), switch function (On-Mom), illumination specifications (LED, Amber, 2 VDC), mechanical interface (22.00mm panel cutout, round flush button), environmental protection (IP65), and lifecycle ratings (1,000,000 mechanical cycles, 100,000 electrical cycles). No circuit redesign or panel modification is required.

Q: Are there any differences in termination between these parts?

A: No. Both parts use identical termination: Solder and Quick Connect 0.110" (2.8mm) terminals. PCB layout and connector compatibility are equivalent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both YB215CWCKW01-5D-JB and YB215CWCPW01-5D-JB are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity). ECCN and HTSUS classifications are identical.

Q: What is the operating temperature range for these switches?

A: Both parts operate across -25°C to 50°C. This range applies to all electrical and mechanical specifications.

Q: Are these parts suitable for sealed enclosure applications?

A: Yes. Both parts carry IP65 rating (dust tight, water resistant), making them suitable for sealed panel installations with environmental exposure protection.

Q: What is the illumination voltage requirement?

A: Both parts require 2 VDC nominal for LED amber illumination. This voltage must be supplied independently from the switch control circuit.