XZDBPLNANF-24.000000 Equivalent & Substitute Parts

Part Overview

The XZDBPLNANF-24.000000 is a 24 MHz fundamental mode crystal oscillator manufactured by Taitien, designed for surface mount applications in the XZ series. This active product operates across the industrial temperature range of -40°C to 85°C with a load capacitance of 12pF and 100 Ohms equivalent series resistance. Substitute parts are necessary when the primary manufacturer part is unavailable, when alternative ESR or load capacitance values better match circuit requirements, or when supply chain optimization is required across multiple qualified sources.

Key Parameters

Parameter	Value
Frequency	24 MHz
Frequency Tolerance	±10ppm
Frequency Stability	±15ppm
Load Capacitance	12pF
ESR (Equivalent Series Resistance)	100 Ohms
Operating Mode	Fundamental
Operating Temperature Range	-40°C to 85°C
Mounting Type	Surface Mount
Package / Case	4-SMD, No Lead
Size / Dimension	0.081" L x 0.065" W (2.05mm x 1.65mm)
Height - Seated (Max)	0.022" (0.55mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters: frequency (24 MHz), frequency tolerance (±10ppm), operating temperature range (-40°C to 85°C), operating mode (fundamental), mounting type (surface mount), and package type (4-SMD, No Lead). All substitute parts listed meet these core requirements.

Load capacitance and ESR are secondary parameters that may vary within acceptable ranges. The XZDBPLNANF-24.000000 specifies 12pF load capacitance with 100 Ohms ESR. Substitute parts with 10pF or 9pF load capacitance and 80 Ohms ESR are functionally equivalent when the circuit design accommodates these variations. Parts are grouped by load capacitance value to facilitate selection based on specific circuit requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Frequency	Load Capacitance	ESR (Ohms)	Size (mm)	Height (mm)	RoHS Status	Inventory (Pcs)
XZDBPLNANF-24.000000	Taitien	24 MHz	12pF	100	2.05 x 1.65	0.55	ROHS3 Compliant	648
Q 24,0-JXS21-12-10/15-T1-FU-WA-LF	Jauch Quartz	24 MHz	12pF	80	2.00 x 1.60	0.55	ROHS3 Compliant	4,635
402F2401XIAR	CTS-Frequency Controls	24 MHz	10pF	100	2.00 x 1.60	0.55	ROHS3 Compliant	21,392
ECS-240-10-37-CWN-TR	ECS Inc.	24 MHz	10pF	80	2.00 x 1.60	0.55	ROHS3 Compliant	13,778
Q 24,0-JXS21-10-10/15-T1-FU-WA-LF	Jauch Quartz	24 MHz	10pF	80	2.00 x 1.60	0.55	ROHS3 Compliant	7,086
Q 24,0-JXS21-9-10/15-T1-FU-WA-LF	Jauch Quartz	24 MHz	9pF	80	2.00 x 1.60	0.55	ROHS3 Compliant	2,707

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and REACH unaffected status, meeting the same regulatory requirements as the primary part. Selection among substitutes depends on load capacitance requirements and ESR tolerance of the target circuit.

For circuits designed with 12pF load capacitance specification, the Q 24,0-JXS21-12-10/15-T1-FU-WA-LF from Jauch Quartz provides direct functional equivalence with lower ESR (80 Ohms versus 100 Ohms), which may improve oscillator startup characteristics and reduce power consumption.

For circuits tolerant of 10pF load capacitance, the 402F2401XIAR from CTS-Frequency Controls maintains the 100 Ohms ESR specification and offers the highest inventory availability. The ECS-240-10-37-CWN-TR and Q 24,0-JXS21-10-10/15-T1-FU-WA-LF both specify 10pF load capacitance with 80 Ohms ESR.

For circuits designed with 9pF load capacitance, the Q 24,0-JXS21-9-10/15-T1-FU-WA-LF is the available option.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 10pF load capacitance crystal for the 12pF specification?

A: Substitution is possible only if the circuit design accommodates 10pF load capacitance. Load capacitance affects the oscillation frequency and startup behavior. Verify circuit design parameters before substitution.

Q: What is the impact of ESR differences between 100 Ohms and 80 Ohms?

A: Lower ESR (80 Ohms) generally improves oscillator startup time and reduces power consumption. Higher ESR (100 Ohms) may require longer startup time but does not prevent operation. Both values are within acceptable ranges for 24 MHz fundamental mode crystals.

Q: Are all substitute parts pin-compatible with the XZDBPLNANF-24.000000?

A: All substitute parts use the 4-SMD, No Lead package type with identical pinout. Physical dimensions vary slightly (2.05mm x 1.65mm for the primary part versus 2.00mm x 1.60mm for substitutes), but both fit standard 4-SMD footprints. Verify PCB layout clearances for the specific dimensions.

Q: Do all parts meet the same temperature operating range?

A: Yes. All listed parts operate across -40°C to 85°C, matching the primary part specification.

Q: Which substitute offers the best supply availability?

A: The 402F2401XIAR from CTS-Frequency Controls has the highest inventory at 21,392 pieces, followed by ECS-240-10-37-CWN-TR at 13,778 pieces.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message