XZBBCLNANF-16.000000 Equivalent & Substitute Parts

Part Overview

The XZBBCLNANF-16.000000 is a 16 MHz fundamental mode crystal oscillator manufactured by Taitien, designed for surface mount applications in 4-SMD, No Lead packaging. This Active product operates across the industrial temperature range of -40°C to 85°C with ±10ppm frequency tolerance and 9pF load capacitance. Substitute parts are identified to address inventory availability, lead time requirements, or specific application constraints while maintaining electrical and mechanical compatibility within the defined parameter tolerance.

Key Parameters

Parameter	Value	Unit
Frequency	16.0000	MHz
Frequency Tolerance	±10	ppm
Frequency Stability	±20	ppm
Load Capacitance	9	pF
ESR (Equivalent Series Resistance)	200	Ohms
Operating Mode	Fundamental	—
Operating Temperature Range	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	4-SMD, No Lead	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the XZBBCLNANF-16.000000 are qualified based on the following critical parameters:

Frequency matching at 16.0000 MHz with identical frequency tolerance of ±10ppm and frequency stability of ±20ppm ensures direct functional equivalence in timing-critical applications. Load capacitance, ESR, and operating mode (Fundamental) determine circuit compatibility and oscillation characteristics. Operating temperature range of -40°C to 85°C must be maintained across all substitutes. Surface mount packaging in 4-SMD, No Lead format is mandatory for mechanical and electrical interconnection compatibility. RoHS3 compliance and MSL rating ensure environmental and manufacturing process compatibility.

The identified substitutes ABM11W-16.0000MHZ-8-D1X-T3 (Abracon LLC) and FW1600010 (Diodes Incorporated) meet all critical frequency, temperature, packaging, and compliance parameters. Minor variations in load capacitance (8pF vs. 9pF) and ESR (150 Ohms vs. 200 Ohms) fall within acceptable engineering tolerances for 16 MHz crystal applications and do not preclude substitution in standard circuit designs.

Parameter Comparison

Parameter	XZBBCLNANF-16.000000 (Taitien)	ABM11W-16.0000MHZ-8-D1X-T3 (Abracon)	FW1600010 (Diodes)
Frequency	16.0000 MHz	16.0000 MHz	16.0000 MHz
Frequency Tolerance	±10 ppm	±10 ppm	±10 ppm
Frequency Stability	±20 ppm	±20 ppm	±20 ppm
Load Capacitance	9 pF	8 pF	8 pF
ESR	200 Ohms	150 Ohms	150 Ohms
Operating Mode	Fundamental	Fundamental	Fundamental
Operating Temperature	-40 to 85°C	-40 to 85°C	-40 to 85°C
Package / Case	4-SMD, No Lead	4-SMD, No Lead	4-SMD, No Lead
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	Not Applicable	1 (Unlimited)

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance, confirming current manufacturing support and environmental regulatory alignment. The XZBBCLNANF-16.000000 (Taitien) and FW1600010 (Diodes Incorporated) share identical MSL ratings of 1 (Unlimited), indicating equivalent moisture handling and storage requirements. The ABM11W-16.0000MHZ-8-D1X-T3 (Abracon LLC) carries a Not Applicable MSL designation, which does not preclude its use but may require verification against specific manufacturing process requirements.

Selection between these parts should be based on inventory availability, lead time, and supply chain requirements. All three parts satisfy the electrical and mechanical specifications for 16 MHz crystal applications in 4-SMD, No Lead surface mount configurations.

Frequently Asked Questions (FAQ)

Q: Can ABM11W-16.0000MHZ-8-D1X-T3 and FW1600010 be used interchangeably with XZBBCLNANF-16.000000?

A: Yes. All three parts operate at 16.0000 MHz with ±10ppm frequency tolerance, ±20ppm frequency stability, Fundamental operating mode, -40°C to 85°C temperature range, and 4-SMD No Lead packaging. The load capacitance and ESR variations (8pF/150 Ohms vs. 9pF/200 Ohms) are within acceptable tolerances for standard 16 MHz crystal circuit designs.

Q: What is the significance of the load capacitance difference between the main part and substitutes?

A: Load capacitance affects the oscillation frequency in the circuit. The XZBBCLNANF-16.000000 specifies 9pF, while both substitutes specify 8pF. Circuit design typically accommodates this variation through load capacitor selection on the oscillator pins. The ±10ppm frequency tolerance specification applies to all parts and accounts for normal load capacitance variations.

Q: Are there packaging or footprint differences between these parts?

A: All three parts use identical 4-SMD, No Lead packaging. Physical dimensions are comparable: XZBBCLNANF-16.000000 measures 2.05mm × 1.65mm with 0.55mm maximum height; ABM11W-16.0000MHZ-8-D1X-T3 measures 2.00mm × 1.60mm with 0.50mm maximum height; FW1600010 measures 2.00mm × 1.60mm with 0.55mm maximum height. These minor dimensional variations do not affect PCB footprint compatibility.

Q: What is the difference between frequency tolerance and frequency stability?

A: Frequency tolerance (±10ppm) specifies the initial accuracy of the crystal frequency at room temperature and nominal operating conditions. Frequency stability (±20ppm) specifies the maximum frequency variation across the full operating temperature range of -40°C to 85°C. All three parts maintain identical specifications for both parameters.

Q: Does MSL rating affect part substitution?

A: MSL (Moisture Sensitivity Level) rating indicates moisture handling and storage requirements during manufacturing and assembly. The XZBBCLNANF-16.000000 and FW1600010 both carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The ABM11W-16.0000MHZ-8-D1X-T3 carries Not Applicable MSL, which does not indicate incompatibility but may require verification against specific manufacturing process moisture control specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message