XYLEELNANF-26.000000 Equivalent & Substitute Parts

Part Overview

The XYLEELNANF-26.000000 is a 26 MHz fundamental mode crystal oscillator manufactured by Taitien, designed for surface mount applications requiring precise frequency stability. This Active product is specified with 6pF load capacitance, 80 Ohms equivalent series resistance, and operates across the -40°C to 85°C temperature range. The part is supplied in Tape & Reel packaging and maintains ROHS3 compliance with MSL Level 1 rating. Substitute parts are identified to address packaging format availability, inventory requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

XYLEELNANF-26.000000

TaitienIn Stock: 966XYLEELNANF-26.000000 Datasheet

Current PartRFQ

XZLEELNANF-26.000000

TaitienIn Stock: 1701XZLEELNANF-26.000000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The XZLEELNANF-26.000000 qualifies as an equivalent substitute based on the following critical parameters:

Electrical compatibility is maintained through identical frequency (26 MHz), frequency stability (±30ppm), load capacitance (6pF), and operating mode (Fundamental). Both parts operate across the same temperature range (-40°C to 85°C) and share identical package configuration (4-SMD, No Lead).

The primary difference between the main part and substitute is the ESR specification (80 Ohms versus 100 Ohms) and packaging format (Tape & Reel versus Cut Tape). The ESR variance of 20 Ohms remains within acceptable tolerance for most 26 MHz crystal applications. The packaging difference reflects distribution and procurement flexibility rather than functional incompatibility.

Both parts maintain identical compliance certifications (ROHS3, MSL Level 1, REACH Unaffected, EAR99 ECCN classification).

Parameter Comparison

Engineering Selection Recommendations

Both XYLEELNANF-26.000000 and XZLEELNANF-26.000000 are Active products from Taitien with full ROHS3 compliance and REACH Unaffected status. Selection between these parts should be based on:

Packaging requirements: XYLEELNANF-26.000000 is supplied in Tape & Reel format suitable for automated assembly processes. XZLEELNANF-26.000000 is supplied in Cut Tape format, appropriate for lower-volume or manual assembly operations.

Physical footprint: XZLEELNANF-26.000000 features a smaller footprint (2.05mm x 1.65mm versus 2.55mm x 2.05mm), which may be advantageous in space-constrained PCB layouts while maintaining identical height specifications.

ESR specification: The 20 Ohm difference in ESR (80 Ohms versus 100 Ohms) is within typical tolerance ranges for 26 MHz crystal applications and does not affect functional compatibility in standard oscillator circuits.

Both parts maintain identical electrical performance across frequency, stability, load capacitance, and temperature operating range.

Frequently Asked Questions (FAQ)

Q: Can XZLEELNANF-26.000000 directly replace XYLEELNANF-26.000000 in production?

A: Yes. Both parts share identical electrical specifications (26 MHz, ±30ppm stability, 6pF load capacitance, Fundamental mode) and operate across the same temperature range. The primary differences are packaging format (Tape & Reel versus Cut Tape) and physical dimensions. Verify that your assembly equipment accommodates the Cut Tape format and that the smaller footprint (2.05mm x 1.65mm) fits your PCB layout.

Q: What is the significance of the ESR difference between these parts?

A: XYLEELNANF-26.000000 specifies 80 Ohms ESR while XZLEELNANF-26.000000 specifies 100 Ohms ESR. This 20 Ohm variance is within acceptable tolerance for 26 MHz crystal oscillator circuits and does not impact frequency stability or load capacitance performance. Both values are typical for this frequency class.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain identical compliance status: ROHS3 Compliant, MSL Level 1 (Unlimited), REACH Unaffected, and EAR99 ECCN classification.

Q: Which part should I select for high-volume automated assembly?

A: XYLEELNANF-26.000000 in Tape & Reel packaging is optimized for automated pick-and-place assembly processes typical of high-volume production.

Q: Which part is suitable for space-constrained applications?

A: XZLEELNANF-26.000000 offers a smaller footprint (2.05mm x 1.65mm) compared to XYLEELNANF-26.000000 (2.55mm x 2.05mm), making it preferable for PCB layouts with limited board space, provided your assembly process supports Cut Tape format.