XYLEECNANF-30.000000 Equivalent & Substitute Parts

Part Overview

The XYLEECNANF-30.000000 is a 30 MHz fundamental mode crystal oscillator manufactured by Taitien, designed for surface mount applications requiring precise frequency stability. This Active product is specified with 6pF load capacitance, 80 Ohms equivalent series resistance, and operates across the -20°C to 70°C temperature range. The component is packaged in a 4-SMD, No Lead configuration with RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

XYLEECNANF-30.000000

TaitienIn Stock: 862XYLEECNANF-30.000000 Datasheet

Current PartRFQ

XZLEECNANF-30.000000

TaitienIn Stock: 1665XZLEECNANF-30.000000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The XZLEECNANF-30.000000 qualifies as an equivalent substitute based on the following critical parameters:

Electrical compatibility is established through identical frequency (30 MHz), frequency stability (±30ppm), load capacitance (6pF), and operating mode (Fundamental). Both parts operate within the same temperature range (-20°C ~ 70°C) and share identical package classification (4-SMD, No Lead).

The primary difference between the main part and substitute is the equivalent series resistance (ESR): the main part specifies 80 Ohms while the substitute specifies 100 Ohms. This 20 Ohm variance remains within acceptable tolerance for 30 MHz crystal applications and does not affect functional compatibility in standard oscillator circuits.

Secondary differences include packaging format (Tape & Reel versus Cut Tape) and physical dimensions (0.100" L x 0.081" W versus 0.081" L x 0.065" W). Both maintain identical height (0.022" maximum seated height) and are suitable for automated assembly processes.

Both parts maintain ROHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both the XYLEECNANF-30.000000 and XZLEECNANF-30.000000 are Active products from Taitien with full ROHS3 compliance and identical regulatory status (REACH Unaffected, ECCN EAR99, HTSUS 8541.60.0060). Selection between these parts should be based on:

Packaging requirements: The main part is supplied in Tape & Reel format suitable for high-volume automated assembly, while the substitute is supplied in Cut Tape format appropriate for lower-volume or manual assembly processes.

Physical footprint constraints: The substitute part features a smaller footprint (0.081" L x 0.065" W) compared to the main part (0.100" L x 0.081" W), which may be advantageous in space-constrained PCB layouts while maintaining identical mounting height.

ESR tolerance: The 20 Ohm difference in equivalent series resistance (80 Ohms versus 100 Ohms) is acceptable for standard 30 MHz oscillator circuit designs and does not introduce functional incompatibility.

Inventory availability: The substitute part maintains higher stock levels (1611 Pcs) compared to the main part (760 Pcs), supporting supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can XZLEECNANF-30.000000 be used as a direct replacement for XYLEECNANF-30.000000?

A: Yes. Both parts share identical electrical specifications (30 MHz, ±30ppm stability, 6pF load capacitance, Fundamental mode) and operate across the same temperature range. The 20 Ohm ESR difference does not affect functional compatibility in standard oscillator applications.

Q: What is the primary difference between these two parts?

A: The main differences are packaging format (Tape & Reel versus Cut Tape), physical dimensions (0.100" x 0.081" versus 0.081" x 0.065"), and ESR specification (80 Ohms versus 100 Ohms). Electrical performance and temperature range are identical.

Q: Are both parts suitable for automated assembly?

A: Yes. Both parts are surface mount components in 4-SMD, No Lead packages with identical seated height (0.022" maximum). The Tape & Reel format is optimized for high-speed automated pick-and-place equipment, while Cut Tape format is suitable for lower-volume or manual assembly processes.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both parts are ROHS3 compliant, REACH Unaffected, and carry identical ECCN (EAR99) and HTSUS (8541.60.0060) classifications. Moisture sensitivity level is 1 (Unlimited) for both.

Q: Which part should be selected for space-constrained PCB designs?

A: The XZLEECNANF-30.000000 offers a smaller footprint (0.081" L x 0.065" W) compared to the XYLEECNANF-30.000000 (0.100" L x 0.081" W), making it suitable for applications with limited board space while maintaining identical electrical performance.