XYCBBCNANF-20.000000 Equivalent & Substitute Parts

Part Overview

The XYCBBCNANF-20.000000 is a 20 MHz fundamental mode crystal oscillator manufactured by Taitien, designed for surface mount applications in the XY series. This active product features a 10pF load capacitance, 80 Ohms equivalent series resistance, and operates across the -20°C to 70°C temperature range. The component is packaged in a 4-SMD, No Lead configuration with RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to address inventory availability, lead time requirements, or specific application constraints while maintaining functional equivalence within defined electrical and mechanical parameters.

Substiute Parts

XYCBBCNANF-20.000000

TaitienIn Stock: 980XYCBBCNANF-20.000000 Datasheet

Current PartRFQ

ABM11W-20.0000MHZ-8-B1U-T3

Abracon LLCIn Stock: 3406ABM11W-20.0000MHZ-8-B1U-T3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XYCBBCNANF-20.000000 is determined by the following critical parameters:

Frequency matching at 20 MHz is mandatory. Frequency stability of ±10ppm is required for functional equivalence. Operating mode must remain fundamental. Surface mount packaging with 4-SMD, No Lead configuration is required. Operating temperature range of -20°C to 70°C must be maintained or exceeded. RoHS3 compliance and REACH unaffected status are required for regulatory equivalence.

Load capacitance and ESR values may vary within acceptable ranges for circuit design accommodation, provided the substitute part is specified for the same or compatible load capacitance environment. Physical dimensions may differ within the constraints of surface mount assembly equipment compatibility.

Parameter Comparison

Engineering Selection Recommendations

The ABM11W-20.0000MHZ-8-B1U-T3 from Abracon LLC qualifies as a functional substitute for the XYCBBCNANF-20.000000. Both components share identical frequency, frequency stability, operating mode, temperature range, mounting type, package configuration, and regulatory compliance status.

Differences in load capacitance (10pF versus 8pF) and ESR (80 Ohms versus 120 Ohms) require circuit design verification. The substitute part operates with lower load capacitance and higher series resistance, which may affect oscillation startup characteristics and frequency accuracy depending on circuit design parameters. Physical dimensions are smaller for the Abracon part, which may provide layout advantages in space-constrained applications.

Both components maintain active product status and full RoHS3 compliance with REACH unaffected designation, ensuring regulatory equivalence for new designs and production environments.

Frequently Asked Questions (FAQ)

Q: Can the ABM11W-20.0000MHZ-8-B1U-T3 be used as a direct replacement for the XYCBBCNANF-20.000000?

A: Functional substitution is possible when circuit design accommodates the differences in load capacitance (8pF versus 10pF) and ESR (120 Ohms versus 80 Ohms). Direct pin-for-pin replacement is supported by the identical 4-SMD, No Lead package configuration. Circuit simulation or testing is necessary to confirm frequency accuracy and startup behavior with the substitute part's electrical characteristics.

Q: What are the key electrical differences between these parts?

A: The primary electrical differences are load capacitance and ESR. The XYCBBCNANF-20.000000 specifies 10pF load capacitance with 80 Ohms ESR, while the ABM11W-20.0000MHZ-8-B1U-T3 specifies 8pF load capacitance with 120 Ohms ESR. Both maintain identical 20 MHz frequency and ±10ppm stability. These differences affect circuit impedance matching and oscillation characteristics.

Q: Are there physical compatibility concerns with the substitute part?

A: The Abracon part is physically smaller (2.00mm x 1.60mm versus 2.55mm x 2.05mm) and slightly lower in height (0.50mm versus 0.55mm). Both use 4-SMD, No Lead surface mount packaging compatible with standard pick-and-place assembly equipment. PCB footprint design may require adjustment to accommodate the smaller dimensions.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the XYCBBCNANF-20.000000 and ABM11W-20.0000MHZ-8-B1U-T3 are RoHS3 compliant and REACH unaffected, meeting identical regulatory standards for commercial and industrial applications.

Q: What is the operating temperature compatibility?

A: Both parts operate across the identical temperature range of -20°C to 70°C, ensuring thermal compatibility in equivalent application environments.