XTEAWT-02-0000-00000LED2 Equivalent & Substitute Parts

Part Overview

The XTEAWT-02-0000-00000LED2 is a CreeLED XLamp® XT-E neutral white LED operating at 4500K color temperature. This surface-mount component is designed for lighting applications requiring high luminous efficacy and consistent color rendering. The part is Active status and RoHS Compliant, making it suitable for current production environments. Substitute parts are identified based on matching electrical performance, mechanical compatibility, and thermal characteristics within the 1414 (3535 Metric) package footprint.

Substiute Parts

XTEAWT-02-0000-00000LED2

CreeLED, Inc.In Stock: 687XTEAWT-02-0000-00000LED2 Datasheet

Current PartRFQ

XPEBWT-L1-0000-00EE4

CreeLED, Inc.In Stock: 6663XPEBWT-L1-0000-00EE4 Datasheet

Parametric EquivalentRFQ

XPEBWT-L1-0000-00EE5

CreeLED, Inc.In Stock: 3771XPEBWT-L1-0000-00EE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XTEAWT-02-0000-00000LED2 are qualified based on the following electrical and mechanical parameters:

Primary Matching Criteria:

• Color temperature within acceptable range (4000K–4500K neutral white)
• Test current compatibility (350mA nominal operation)
• Forward voltage within design tolerance (2.85V–2.9V)
• Identical package footprint (1414 / 3535 Metric)
• Identical physical dimensions (0.136" x 0.136")
• Surface-mount configuration
• Active product status
• RoHS and REACH compliance

Identified Substitutes:

1. XPEBWT-L1-0000-00EE4 – XLamp® XP-E2 series, 4500K, matches primary color temperature and electrical test parameters
2. XPEBWT-L1-0000-00EE5 – XLamp® XP-E2 series, 4000K, acceptable within neutral white spectrum for applications tolerating slight color shift

Both substitutes operate at 350mA test current, maintain compatible forward voltage, and share identical package dimensions and mounting characteristics.

Parameter Comparison

Engineering Selection Recommendations

XPEBWT-L1-0000-00EE4 (Primary Substitute)

This part is the direct equivalent for applications requiring 4500K color temperature. Both the main part and this substitute maintain identical flux output (118lm @ 85°C, 350mA), CRI (75 Typ), and test current. Both are Active status with full RoHS and REACH compliance. The forward voltage difference (2.85V vs. 2.9V) is within typical design tolerance for LED driver circuits. The reduced maximum current rating (1A vs. 1.5A) does not affect operation at the 350mA test condition. The increased thermal resistance (9°C/W vs. 5°C/W) requires thermal management evaluation for high-power continuous operation.

XPEBWT-L1-0000-00EE5 (Secondary Substitute)

This part is suitable for applications where a 4000K color temperature is acceptable. It maintains identical electrical performance at the 350mA test condition and shares all compliance certifications. Selection of this part introduces a 500K color temperature shift from the original specification and should be limited to applications with flexible color temperature requirements.

Frequently Asked Questions (FAQ)

Q: Can XPEBWT-L1-0000-00EE4 be used as a direct replacement for XTEAWT-02-0000-00000LED2?

A: Yes. Both parts operate at 350mA test current, produce 118lm flux output at 85°C, maintain 75 CRI, and share identical 1414 (3535 Metric) package dimensions. The forward voltage difference (0.05V) is within standard LED driver tolerance. Both are Active status with RoHS and REACH compliance.

Q: What is the impact of the thermal resistance difference between the main part and substitutes?

A: The main part has 5°C/W thermal resistance; substitutes have 9°C/W. This affects junction temperature rise under continuous operation. For applications operating at or near maximum current ratings, thermal management design must account for the higher thermal resistance of substitute parts.

Q: Can XPEBWT-L1-0000-00EE5 be used if the application requires 4500K?

A: No. XPEBWT-L1-0000-00EE5 operates at 4000K, which is a 500K shift from the specified 4500K. Use only in applications where neutral white color temperature is flexible or where 4000K is explicitly acceptable.

Q: Are there viewing angle differences between the main part and substitutes?

A: Yes. The main part has a 115° viewing angle; both substitutes have 110°. This 5° reduction may affect light distribution in applications with specific beam angle requirements.

Q: Do all parts use the same packaging format?

A: Yes. All three parts use Tape & Reel (TR) packaging in the 1414 (3535 Metric) footprint with identical 0.136" x 0.136" dimensions. Height differences (0.100" main part vs. 0.094" substitutes) are within typical PCB assembly tolerances.

Q: Are there any compliance or regulatory differences?

A: No. All parts are RoHS Compliant and REACH Unaffected. All are Active status products from CreeLED, Inc.