XS5C-D4S5 Equivalent & Substitute Parts

Part Overview

The XS5C-D4S5 is a 4-position circular connector receptacle manufactured by Omron Automation and Safety. This female socket connector features screw termination, M12-4 shell size, and is rated for 4A at 250VDC. The connector is designed for free-hanging in-line mounting applications requiring IP67 ingress protection. As an active product with RoHS compliance and unlimited moisture sensitivity rating, substitute parts may be required due to supply constraints, regional availability, or specific application requirements where alternative electrical or mechanical parameters are acceptable.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Female Sockets
Number of Positions	4
Shell Size - Insert	M12-4
Termination	Screw
Mounting Type	Free Hanging (In-Line)
Ingress Protection	IP67 - Dust Tight, Waterproof
Current Rating	4A
Voltage Rating	250VDC
Operating Temperature	-25°C ~ 70°C
Contact Finish - Mating	Gold
Product Status	Active
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the XS5C-D4S5 is determined by the following critical parameters that must remain constant:

Connector type: Receptacle, Female Sockets
Number of positions: 4
Shell size: M12-4
Termination method: Screw
Mounting configuration: Free Hanging (In-Line)
Ingress protection rating: IP67
Current capacity: 4A minimum
Contact finish: Gold plating on mating surfaces

The substitute parts 1515170 and 1694295 (both Phoenix Contact SACC series) satisfy these core requirements. Both are 4-position M12-4 female socket receptacles with screw termination, IP67 rating, 4A current capacity, and gold-plated contacts. Variations in voltage rating, operating temperature range, fastening type, and cable opening dimensions are within acceptable substitution parameters for this connector category.

Parameter Comparison

Parameter	XS5C-D4S5 (Omron)	1515170 (Phoenix Contact)	1694295 (Phoenix Contact)
Manufacturer	Omron Automation and Safety	Phoenix Contact	Phoenix Contact
Series	XS5	SACC	SACC
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	4	4	4
Shell Size - Insert	M12-4	M12-4	M12-4
Termination	Screw	Screw	Screw
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)
Fastening Type	Push-Twist	Threaded	Threaded
Ingress Protection	IP67	IP67	IP67
Current Rating (Amps)	4A	4A	4A
Voltage Rating	250VDC	48VAC, 60VDC	48VAC, 60VDC
Contact Finish - Mating	Gold	Gold	Gold
Operating Temperature	-25°C ~ 70°C	-40°C ~ 85°C	-40°C ~ 85°C
Cable Opening	0.118" ~ 0.157" (3.00mm ~ 4.00mm)	0.236" ~ 0.315" (6.00mm ~ 8.00mm)	0.157" ~ 0.236" (4.00mm ~ 6.00mm)
Shielding	Not shielded	Shielded	Shielded
Product Status	Active	Active	Active
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

All three connectors maintain active product status and comply with applicable environmental regulations. The XS5C-D4S5 is RoHS compliant, while both Phoenix Contact substitutes are ROHS3 compliant, indicating enhanced regulatory alignment. The substitute parts 1515170 and 1694295 provide extended operating temperature ranges (-40°C to 85°C versus -25°C to 70°C) and include shielding, which may provide additional noise immunity in certain applications. Selection between substitute parts should be based on cable opening requirements: part 1694295 accommodates 4.00mm to 6.00mm cable diameters, matching the original specification more closely than 1515170, which requires 6.00mm to 8.00mm cables. Voltage rating differences (250VDC for XS5C-D4S5 versus 48VAC/60VDC for substitutes) must be evaluated against specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can 1515170 or 1694295 be used as direct replacements for XS5C-D4S5?

A: Both Phoenix Contact parts are functionally equivalent for 4-position M12-4 female socket screw-terminated applications with IP67 protection and 4A current capacity. However, cable opening dimensions and voltage ratings differ. Part 1694295 is more compatible with the original cable opening specification (4.00mm to 6.00mm range).

Q: What is the significance of the fastening type difference (Push-Twist versus Threaded)?

A: The XS5C-D4S5 uses push-twist coupling, while substitutes use threaded coupling. These are different mechanical engagement methods. The threaded design of Phoenix Contact parts may require different mating connectors or adapters.

Q: Are the substitute parts shielded while the original is not?

A: Correct. Both 1515170 and 1694295 include shielding, whereas the XS5C-D4S5 is unshielded. Shielded variants provide electromagnetic interference protection but may not be necessary for all applications.

Q: Which substitute part has cable opening dimensions closest to the original?

A: Part 1694295 specifies 0.157" to 0.236" (4.00mm to 6.00mm) cable opening, which overlaps with the original specification of 0.118" to 0.157" (3.00mm to 4.00mm). Part 1515170 requires larger cables (6.00mm to 8.00mm).

Q: Do all three connectors have the same moisture sensitivity rating?

A: Yes. All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What are the packaging differences?

A: The XS5C-D4S5 is supplied in trays, while both Phoenix Contact substitutes are supplied in bulk packaging. This may affect procurement and inventory management processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message