XRP9711EY-F Equivalent & Substitute Parts

Part Overview

The XRP9711EY-F is a Power Management Integrated Circuit (PMIC) manufactured by MaxLinear, Inc., designed as a triple-output voltage regulator combining synchronous buck converters with linear regulation. This device integrates two Step-Down (Buck) Synchronous outputs and one Linear (LDO) output, operating across a switching frequency range of 126kHz to 1.23MHz. The XRP9711EY-F is classified as an Obsolete product, necessitating identification of equivalent substitute components for ongoing system support and new design implementations where legacy compatibility is required.

Substiute Parts

XRP9711EY-F

MaxLinear, Inc.In Stock: 1206XRP9711EY-F Datasheet

Current PartRFQ

XRP9710EY-F

MaxLinear, Inc.In Stock: 2406XRP9710EY-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XRP9711EY-F is determined by strict parametric equivalence across the following critical criteria:

Topology Match: The substitute must provide identical output configuration: two Step-Down (Buck) Synchronous outputs and one Linear (LDO) output.

Output Specifications: All three outputs must maintain identical voltage and current ratings: Output 1 and Output 2 at 0.6V ~ 5.5V with 6A capacity, and Output 3 at 5V with 135mA capacity.

Switching Frequency Range: The substitute must operate within the 126kHz ~ 1.23MHz frequency band.

Supply Voltage: Input voltage range must match 4.75V ~ 22V.

Operating Temperature Range: The substitute must support -40°C ~ 125°C operation.

Package Compatibility: The substitute must use the 45-LGA (12x12) package format to ensure mechanical and electrical pin compatibility.

Sequencer Function: The substitute must include integrated sequencer functionality.

The XRP9710EY-F meets all these criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the XRP9711EY-F and XRP9710EY-F are classified as Obsolete products. Selection between these components should be based on availability and supply chain considerations rather than functional differentiation, as they are parametrically identical across all electrical and mechanical specifications.

The XRP9710EY-F is available in Tray packaging, while the XRP9711EY-F packaging specification is not detailed in the provided data. Both components carry identical export compliance classifications (ECCN: EAR99) and tariff codes (HTSUS: 8542.39.0001), indicating equivalent regulatory treatment.

For applications requiring this specific PMIC topology and output configuration, either component may be selected based on current inventory availability and packaging requirements for your manufacturing process.

Frequently Asked Questions (FAQ)

Q: Can the XRP9710EY-F directly replace the XRP9711EY-F in existing designs?

A: Yes. The XRP9710EY-F is a parametric equivalent with identical electrical specifications, output configuration, switching frequency range, supply voltage requirements, operating temperature range, and package format (45-LGA 12x12). Direct substitution is supported at the component level.

Q: Are there any differences in the pin configuration between these parts?

A: Both components use the 45-LGA (12x12) package format. No pin configuration differences are specified in the provided technical data. PCB layout compatibility is maintained.

Q: What is the significance of the Obsolete product status?

A: Both components are classified as Obsolete, indicating they are no longer in active production. This status necessitates component substitution planning for long-term system support. Equivalent alternatives should be identified and qualified for future production runs.

Q: Does packaging type affect electrical performance?

A: No. The packaging difference (Tray for XRP9710EY-F) is a logistics and handling specification only. Electrical performance and functional characteristics remain identical. Packaging selection should be based on manufacturing process requirements and inventory management practices.

Q: Are both components subject to the same moisture sensitivity requirements?

A: Yes. Both the XRP9711EY-F and XRP9710EY-F carry MSL Level 3 (168 Hours) classification, requiring identical handling, storage, and reflow procedures during assembly.