XRN.M13.GLL.6GZ Equivalent & Substitute Parts

Part Overview

The XRN.M13.GLL.6GZ is a 13-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This component is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing system maintenance and new design implementations. The connector is designed for industrial, medical, and testing equipment applications requiring reliable push-pull fastening and IP50 dust protection.

Substiute Parts

XRN.M13.GLL.6GZ

LEMOIn Stock: 989XRN.M13.GLL.6GZ Datasheet

Current PartRFQ

SRN.M13.GLL.6GZ

LEMOIn Stock: 835SRN.M13.GLL.6GZ Datasheet

DirectRFQ

PRG.M1.4GL.LC65G

LEMOIn Stock: 1041PRG.M1.4GL.LC65G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XRN.M13.GLL.6GZ is determined by the following critical parameters:

Direct Equivalent Criteria:

• Connector type: Receptacle, Female Sockets
• Number of positions: 13
• Shell size: M13
• Termination method: Solder Cup
• Fastening type: Push-Pull
• Current rating: 4A
• Operating temperature range: -50°C ~ 170°C
• Ingress protection: IP50
• RoHS compliance: ROHS3 Compliant

Similar Substitute Criteria:

• Connector type: Receptacle, Female Sockets
• Termination method: Solder Cup
• Fastening type: Push-Pull (with possible additional features)
• Ingress protection: IP50
• RoHS compliance: ROHS3 Compliant
• Variations permitted: Number of positions, shell size, current rating, operating temperature range

Parameter Comparison

Engineering Selection Recommendations

SRN.M13.GLL.6GZ (Direct Equivalent): This part is the primary substitute for XRN.M13.GLL.6GZ. It maintains identical electrical and mechanical specifications across all critical parameters: 13 positions, M13 shell size, 4A current rating, and -50°C to 170°C operating temperature range. The SRN.M13.GLL.6GZ is currently in active production status with 748 units in stock, providing supply continuity. Both parts are ROHS3 compliant and carry identical REACH and ECCN classifications. The series designation differs (SP versus XP), but functional compatibility is complete.

PRG.M1.4GL.LC65G (Similar Substitute): This part is a similar substitute applicable only when design flexibility permits accommodation of specification variations. Key differences include: 14 positions instead of 13, M14 shell size instead of M13, reduced current rating of 2A versus 4A, and lower maximum operating temperature of 150°C versus 170°C. The PRG.M1.4GL.LC65G includes detent lock fastening in addition to push-pull functionality and features polysulfone shell material instead of sulfone. This part is suitable for applications where the additional position, larger shell size, and lower current/temperature ratings do not conflict with system requirements. The part is currently active with 989 units in stock.

Frequently Asked Questions (FAQ)

Q: Can SRN.M13.GLL.6GZ be used as a direct replacement for XRN.M13.GLL.6GZ?

A: Yes. The SRN.M13.GLL.6GZ is a direct equivalent. Both parts share identical specifications for connector type, number of positions, shell size, termination method, fastening type, current rating, operating temperature range, and ingress protection. The primary difference is product status: XRN.M13.GLL.6GZ is obsolete while SRN.M13.GLL.6GZ is active production.

Q: What are the limitations of using PRG.M1.4GL.LC65G as a substitute?

A: The PRG.M1.4GL.LC65G introduces three specification changes: increased position count (14 versus 13), larger shell size (M14 versus M13), and reduced current capacity (2A versus 4A). Additionally, the maximum operating temperature is limited to 150°C compared to 170°C for the original part. These differences require design verification to confirm compatibility with existing mating connectors and system current requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. Both SRN.M13.GLL.6GZ and PRG.M1.4GL.LC65G are ROHS3 compliant, matching the compliance status of XRN.M13.GLL.6GZ. All three parts carry identical REACH unaffected status and EAR99 ECCN classification.

Q: What is the difference in shell material between the main part and substitutes?

A: XRN.M13.GLL.6GZ and SRN.M13.GLL.6GZ both use sulfone shell material. PRG.M1.4GL.LC65G uses polysulfone (PSU) shell material. Both materials provide equivalent ingress protection (IP50) and support the same operating temperature range for their respective specifications.

Q: How does packaging differ between substitute options?

A: XRN.M13.GLL.6GZ packaging is not specified. SRN.M13.GLL.6GZ is supplied in bulk packaging. PRG.M1.4GL.LC65G is also supplied in bulk packaging. Packaging differences do not affect functional compatibility.

Q: Can the detent lock feature on PRG.M1.4GL.LC65G be disabled?

A: The PRG.M1.4GL.LC65G includes detent lock as an integrated fastening feature in addition to push-pull functionality. This specification is provided as-is and cannot be modified.