XRCGRN-L1-0000-00M03 Equivalent & Substitute Parts

Part Overview

The XRCGRN-L1-0000-00M03 is a CreeLED XLamp® XR-C Green 530nm surface mount LED in 3529 (9073 Metric) package configuration. This component is classified as obsolete product status. Due to its obsolescence, identifying functionally compatible substitute parts is essential for design continuity, procurement planning, and system reliability in applications requiring green LED lighting at 530nm wavelength.

Substiute Parts

XRCGRN-L1-0000-00M03

CreeLED, Inc.In Stock: 896XRCGRN-L1-0000-00M03 Datasheet

Current PartRFQ

XPEBGR-L1-0000-00A03

CreeLED, Inc.In Stock: 1101XPEBGR-L1-0000-00A03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XRCGRN-L1-0000-00M03 is determined by the following critical parameters:

• Wavelength Match: 530nm (525nm ~ 535nm) green spectrum
• Mounting Type: Surface Mount (SMD)
• Electrical Compatibility: Forward voltage and current ratings within acceptable operating ranges
• Compliance: RoHS Compliant status maintained
• Thermal Performance: Package thermal resistance suitable for application requirements

The substitute part XPEBGR-L1-0000-00A03 maintains the same wavelength specification and green color, operates at the same test current (350mA), and meets identical compliance requirements. However, it differs in package form factor (1414 vs. 3529), physical dimensions, and electrical characteristics. These differences require circuit-level evaluation for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The XPEBGR-L1-0000-00A03 is available as an active product from CreeLED, Inc., addressing the obsolescence of the XRCGRN-L1-0000-00M03. Both parts maintain RoHS Compliance and REACH Unaffected status, satisfying regulatory requirements.

Selection of the XPEBGR-L1-0000-00A03 requires evaluation of the following factors:

• Package Form Factor: The substitute uses 1414 (3535 Metric) package versus the original 3529 (9073 Metric), necessitating PCB layout modification and potential mechanical redesign.
• Forward Voltage: The substitute operates at 2.85V typical versus 3.7V, requiring circuit recalibration for current-limiting resistor values and power supply compatibility.
• Maximum Current Rating: The substitute supports 1A maximum versus 500mA, providing increased operational headroom but requiring verification of thermal management in the application.
• Luminous Output: The substitute delivers 91lm versus 46lm at test current, representing increased light output that may require optical design adjustment.
• Viewing Angle: The substitute provides 135° versus 100°, affecting light distribution characteristics.

Both parts maintain equivalent thermal resistance performance (11°C/W vs. 12°C/W) and identical wavelength specification (530nm, 525nm ~ 535nm range).

Frequently Asked Questions (FAQ)

Q: Can the XPEBGR-L1-0000-00A03 be used as a direct drop-in replacement for the XRCGRN-L1-0000-00M03?

A: No. While both parts emit green light at 530nm wavelength, they differ in package form factor (1414 vs. 3529), physical dimensions, forward voltage (2.85V vs. 3.7V), and maximum current rating (1A vs. 500mA). PCB layout modification and circuit recalibration are required.

Q: What are the key compatibility criteria for substitution?

A: Substitution is based on wavelength match (530nm ± 5nm), green color specification, surface mount mounting type, RoHS compliance, and electrical operating parameters within acceptable ranges for the application circuit.

Q: How does the package size difference affect implementation?

A: The XPEBGR-L1-0000-00A03 uses a smaller 1414 (3535 Metric) package (3.45mm x 3.45mm x 2.39mm) compared to the 3529 (9073 Metric) package (9.00mm x 7.00mm x 4.60mm). This requires new PCB footprint design, potential mechanical housing modification, and thermal management reassessment.

Q: What circuit modifications are necessary due to forward voltage differences?

A: The substitute part operates at 2.85V typical versus 3.7V. Current-limiting resistor values must be recalculated based on the new forward voltage to maintain desired LED current. Power supply voltage compatibility should be verified.

Q: Are there compliance or certification differences between the parts?

A: Both parts are RoHS Compliant and REACH Unaffected. No compliance differences exist. The substitute is active product status versus obsolete, ensuring long-term availability.

Q: How do the luminous output differences impact optical design?

A: The substitute delivers 91lm versus 46lm at 350mA test current, approximately double the light output. Applications requiring specific illumination levels must account for this increased flux or implement optical attenuation measures.