XPSAF5130P Safety Relay Equivalent & Substitute Parts

Part Overview

The XPSAF5130P is a safety relay manufactured by Schneider Electric from the Preventa XPS series. This component functions as a safety-rated relay for industrial control applications, featuring a 24VAC/DC coil voltage and 3PST-NO (3 Form A) contact configuration with 6A contact rating. The product is classified as obsolete, making identification of functionally equivalent active alternatives necessary for system maintenance, repair, and new design implementations where equivalent performance is required.

Substiute Parts

XPSAF5130P

Schneider ElectricIn Stock: 1215XPSAF5130P Datasheet

Current PartRFQ

ES-FA-9AA

Banner Engineering CorporationIn Stock: 856ES-FA-9AA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XPSAF5130P is determined by strict equivalence across the following critical parameters:

Electrical Compatibility:

• Coil voltage: 24VAC/DC (must match exactly)
• Contact form: 3PST-NO (3 Form A) configuration (must match exactly)
• Contact rating: 6 A minimum (equal or higher acceptable)
• Switching voltage capability: Must accommodate 300V operation

Mechanical Compatibility:

• Mounting type: DIN Rail (must match)
• Termination style: Screw Terminal (must match)
• Lighted indicator feature: Required

Environmental & Regulatory:

• Operating temperature range: Must encompass or exceed -25°C ~ 60°C
• Moisture sensitivity: MSL 1 or equivalent

The ES-FA-9AA from Banner Engineering Corporation meets all mandatory electrical and mechanical parameters for direct substitution. Both components share identical coil voltage, contact configuration, current rating, mounting method, termination style, and indicator feature.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: ES-FA-9AA

The ES-FA-9AA is the direct functional equivalent for XPSAF5130P replacement. Selection rationale is based on the following engineering factors:

Electrical Equivalence: Both components operate on identical 24VAC/DC coil voltage and provide 3PST-NO contact configuration with 6A rating. Switching voltage specifications are compatible for standard industrial control applications.

Mechanical Compatibility: Identical DIN Rail mounting and screw terminal termination enable direct physical installation without mechanical modification.

Product Status & Availability: The ES-FA-9AA is classified as active with 823 pieces in stock, providing immediate availability for replacement and new installations. The XPSAF5130P obsolete status necessitates substitution.

Regulatory Compliance: The ES-FA-9AA carries RoHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements. EAR99 ECCN classification applies.

Temperature Range Consideration: The ES-FA-9AA operating range (0°C ~ 50°C) is narrower than the XPSAF5130P range (-25°C ~ 60°C). Applications requiring operation below 0°C or above 50°C must evaluate environmental conditions against this specification.

Frequently Asked Questions (FAQ)

Q: Can ES-FA-9AA directly replace XPSAF5130P in existing installations?

A: Yes. Both components share identical coil voltage (24VAC/DC), contact configuration (3PST-NO), current rating (6A), mounting type (DIN Rail), and termination style (Screw Terminal). Physical and electrical installation is direct without modification.

Q: What is the primary difference between these two components?

A: The XPSAF5130P is obsolete; the ES-FA-9AA is active. The ES-FA-9AA has a narrower operating temperature range (0°C ~ 50°C versus -25°C ~ 60°C). Applications operating outside 0°C to 50°C must verify compatibility.

Q: Are there any switching voltage limitations with ES-FA-9AA?

A: The ES-FA-9AA is rated for 250VAC and 250VDC maximum switching voltage. Verify that application switching voltages do not exceed these limits.

Q: What certifications does ES-FA-9AA carry?

A: ES-FA-9AA is RoHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: Is the lighted indicator feature identical on both components?

A: Yes. Both XPSAF5130P and ES-FA-9AA include lighted indicator functionality.

Q: What is the operate time specification for ES-FA-9AA?

A: The ES-FA-9AA has an operate time of 25 milliseconds.

Q: Are there packaging differences between these components?

A: XPSAF5130P packaging is listed as dash (unspecified); ES-FA-9AA is supplied in bulk packaging. Verify packaging requirements for your procurement process.