XPGWHT-P1-0000-008F8 Equivalent & Substitute Parts

Part Overview

The XPGWHT-P1-0000-008F8 is a Cree XLamp® XP-G warm white LED in 1414 (3535 Metric) surface mount package, rated for 2850K color temperature with 77 lm output at 350mA test current. This component is Active status and RoHS Compliant, suitable for general illumination applications requiring warm white light output. Substitute parts are identified when inventory constraints or application-specific color temperature requirements necessitate alternative selections within the XLamp® XP-G series.

Substiute Parts

XPGWHT-P1-0000-008F8

CreeLED, Inc.In Stock: 1130XPGWHT-P1-0000-008F8 Datasheet

Current PartRFQ

XPGWHT-P1-R250-008E8

CreeLED, Inc.In Stock: 994XPGWHT-P1-R250-008E8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the XLamp® XP-G warm white LED family is determined by the following critical parameters:

• Electrical Compatibility: Forward voltage (2.9V), test current (350mA), and maximum current (1.5A) must remain constant
• Optical Compatibility: Flux output (77 lm at 350mA), viewing angle (125°), and CRI (85) must be maintained
• Mechanical Compatibility: Package type (1414/3535 Metric), mounting type (Surface Mount), and physical dimensions must be identical
• Color Temperature Variance: CCT may vary within the warm white spectrum (2700K–2850K) when all other parameters are held constant

The substitute part XPGWHT-P1-R250-008E8 differs only in CCT specification (2700K vs. 2850K), with all electrical, optical, and mechanical parameters remaining equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both XPGWHT-P1-0000-008F8 and XPGWHT-P1-R250-008E8 are Active status components with RoHS Compliance and REACH Unaffected certification. Selection between these parts is determined by color temperature requirement:

• XPGWHT-P1-0000-008F8 (2850K): Select for applications requiring warmer color temperature aligned to incandescent lamp characteristics
• XPGWHT-P1-R250-008E8 (2700K): Select for applications requiring deeper warm white tone with lower CCT specification

Both parts maintain identical electrical performance, optical output, mechanical compatibility, and regulatory compliance. Substitution is valid when color temperature variance is acceptable within application design parameters.

Frequently Asked Questions (FAQ)

Q: Can XPGWHT-P1-R250-008E8 be used as a direct replacement for XPGWHT-P1-0000-008F8?

A: Yes, for applications where 2700K color temperature is acceptable. All electrical, optical, and mechanical parameters are identical. The only difference is CCT specification (2700K vs. 2850K).

Q: Are there any circuit design changes required when substituting between these parts?

A: No. Forward voltage (2.9V), test current (350mA), maximum current (1.5A), and thermal characteristics (4°C/W) are identical. No circuit modifications are necessary.

Q: Do both parts use the same package footprint?

A: Yes. Both use 1414 (3535 Metric) surface mount package with identical physical dimensions (3.45mm × 3.45mm) and maximum seated height (2.13mm).

Q: What is the difference in color appearance between 2850K and 2700K?

A: 2850K produces a warmer tone closer to traditional incandescent lighting. 2700K produces a deeper, more amber-toned warm white. Both are within the warm white spectrum.

Q: Are both parts RoHS Compliant?

A: Yes. Both XPGWHT-P1-0000-008F8 and XPGWHT-P1-R250-008E8 are RoHS Compliant and REACH Unaffected.

Q: What is the CRI rating for both parts?

A: Both parts have a CRI (Color Rendering Index) of 85, indicating good color rendering capability for general illumination applications.