XPGWHT-01-0000-00EE4 LED XLamp® XP-G Equivalent & Substitute Parts

Part Overview

The XPGWHT-01-0000-00EE4 is a surface-mount LED from CreeLED's XLamp® XP-G series, specified for neutral white lighting at 4500K color temperature. This component is classified as Active product status with full RoHS compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and thermal characteristics are maintained across the same product series and package format, enabling flexible component sourcing while preserving circuit performance.

Substiute Parts

XPGWHT-01-0000-00EE4

CreeLED, Inc.In Stock: 1013XPGWHT-01-0000-00EE4 Datasheet

Current PartRFQ

XPGWHT-01-0000-00EE5

CreeLED, Inc.In Stock: 1673XPGWHT-01-0000-00EE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XPGWHT-01-0000-00EE4 is determined by strict equivalence across the following critical parameters:

• Manufacturer & Series: Must be CreeLED XLamp® XP-G series
• Package / Case: Must be 1414 (3535 Metric) surface-mount format
• Mounting Type: Surface Mount only
• Electrical Characteristics: Forward voltage (2.9V typical), test current (350mA), maximum current (1.5A), and lumens per watt (116 lm/W) must remain constant
• Thermal Properties: Thermal resistance of 4°C/W must be maintained
• Compliance: RoHS Compliant and REACH Unaffected status required
• Color Category: White, Neutral designation required

The primary variable parameter permitting substitution is Correlated Color Temperature (CCT), which may vary within the neutral white range while all other electrical, mechanical, and thermal specifications remain identical. This allows selection based on specific lighting application requirements without redesign of power delivery or thermal management circuits.

Parameter Comparison

Engineering Selection Recommendations

Both the XPGWHT-01-0000-00EE4 and XPGWHT-01-0000-00EE5 maintain Active product status with identical RoHS Compliant and REACH Unaffected certifications. Selection between these parts is based on application-specific color temperature requirements within the neutral white spectrum. The 4500K variant (XPGWHT-01-0000-00EE4) provides a cooler neutral tone, while the 4000K variant (XPGWHT-01-0000-00EE5) delivers a warmer neutral appearance. All other electrical, mechanical, thermal, and compliance parameters are identical, ensuring direct interchangeability at the circuit level. Component selection should be driven by the lighting application's color temperature specification rather than performance or reliability considerations.

Frequently Asked Questions (FAQ)

Q: Can XPGWHT-01-0000-00EE5 (4000K) be used as a direct replacement for XPGWHT-01-0000-00EE4 (4500K)?

A: Yes. Both parts share identical electrical characteristics (2.9V forward voltage, 350mA test current, 1.5A maximum current), thermal properties (4°C/W), mechanical dimensions (1414/3535 Metric package), and compliance certifications. The only difference is correlated color temperature. Direct substitution is electrically and mechanically valid; selection depends on the application's color temperature requirement.

Q: Are there any circuit modifications required when switching between these parts?

A: No. Forward voltage, current ratings, thermal resistance, and package format are identical. No changes to power delivery circuits, current-limiting resistors, thermal management, or PCB layout are necessary.

Q: What is the significance of the CCT difference between 4500K and 4000K?

A: CCT (Correlated Color Temperature) defines the perceived color of the light output. 4500K is cooler (more blue-white), while 4000K is warmer (more yellow-white). Both remain within the neutral white category. Selection is based on the application's lighting aesthetic and color rendering requirements, not on electrical performance.

Q: Are both parts available in the same packaging format?

A: Yes. Both XPGWHT-01-0000-00EE4 and XPGWHT-01-0000-00EE5 are supplied in Tape & Reel (TR) format, compatible with standard pick-and-place assembly equipment.

Q: Do these parts have identical thermal management requirements?

A: Yes. Both parts have a thermal resistance of 4°C/W and identical physical dimensions (0.136" × 0.136" × 0.084" max height). Thermal design calculations and PCB thermal management strategies remain unchanged between the two variants.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS Compliant and REACH Unaffected, meeting environmental and regulatory requirements for electronic component use in regulated markets.