XPEWHT-L1-0000-009Z7 Equivalent & Substitute Parts

Part Overview

The XPEWHT-L1-0000-009Z7 is a CreeLED XLamp® XP-E warm white LED (3000K) designed for surface mount applications in lighting systems. This component delivers 84 lumens at 350mA test current with a forward voltage of 3.05V and is housed in a 1414 (3535 Metric) package. The part is currently active in production with full RoHS compliance and REACH unaffected status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the XLamp® XP-E series while accommodating different correlated color temperature (CCT) requirements.

Substiute Parts

XPEWHT-L1-0000-009Z7

CreeLED, Inc.In Stock: 1127XPEWHT-L1-0000-009Z7 Datasheet

Current PartRFQ

XPEWHT-L1-0000-009Z8

CreeLED, Inc.In Stock: 2863XPEWHT-L1-0000-009Z8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the XLamp® XP-E warm white LED family is determined by strict equivalence in the following electrical and mechanical parameters:

• Manufacturer & Series: Both parts must be CreeLED XLamp® XP-E devices
• Package / Case: Identical 1414 (3535 Metric) form factor
• Mounting Type: Surface mount compatibility
• Physical Dimensions: 3.45mm × 3.45mm footprint with 2.13mm maximum height
• Electrical Performance: Forward voltage (3.05V Typ), test current (350mA), maximum current (1A), and lumens/watt efficiency (79 lm/W)
• Optical Characteristics: Viewing angle (115°), CRI (80 Typ), and luminous flux range (81–87 lm @ 25°C, 350mA)
• Compliance: RoHS Compliant and REACH Unaffected status

The substitute part XPEWHT-L1-0000-009Z8 differs only in correlated color temperature (2700K versus 3000K), maintaining all other electrical, mechanical, and optical specifications. This CCT variation allows selection based on application-specific color temperature requirements while preserving circuit compatibility and thermal performance.

Parameter Comparison

Engineering Selection Recommendations

Both XPEWHT-L1-0000-009Z7 and XPEWHT-L1-0000-009Z8 are active production components with identical RoHS Compliant and REACH Unaffected certifications. Selection between these parts is determined solely by correlated color temperature requirement: 3000K for the primary part or 2700K for the substitute. All other electrical characteristics, mechanical dimensions, thermal properties, and compliance certifications are equivalent. Circuit design, PCB layout, and thermal management strategies remain unchanged between these two variants.

Frequently Asked Questions (FAQ)

Q: Can XPEWHT-L1-0000-009Z8 (2700K) be used as a direct replacement for XPEWHT-L1-0000-009Z7 (3000K)?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical forward voltage (3.05V), test current (350mA), maximum current (1A), luminous flux (84 lm), efficiency (79 lm/W), package dimensions (1414 / 3535 Metric), and thermal resistance (9°C/W). The only difference is correlated color temperature. Substitution is valid if the application can accommodate 2700K (warmer white) instead of 3000K.

Q: Are the package footprints identical?

A: Yes. Both parts use the 1414 (3535 Metric) package with dimensions of 3.45mm × 3.45mm and maximum seated height of 2.13mm. PCB layout and reflow soldering profiles are interchangeable.

Q: Do these parts have the same thermal characteristics?

A: Yes. Both parts have a thermal resistance of 9°C/W. Thermal management design and heat sink requirements are identical.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both XPEWHT-L1-0000-009Z7 and XPEWHT-L1-0000-009Z8 are RoHS Compliant and REACH Unaffected, meeting the same regulatory requirements.

Q: What is the primary difference between these two parts?

A: The correlated color temperature (CCT). XPEWHT-L1-0000-009Z7 operates at 3000K (neutral warm white), while XPEWHT-L1-0000-009Z8 operates at 2700K (warmer white). All other specifications are equivalent.

Q: Can I use either part interchangeably in my circuit?

A: Yes, provided your application design does not specify a particular CCT requirement. Both parts operate at the same voltage, current, and efficiency levels, and occupy the same physical footprint.