XPEWHT-L1-0000-009E8 Equivalent & Substitute Parts

Part Overview

The XPEWHT-L1-0000-009E8 is a Cree XLamp® XP-E warm white LED designed for general illumination applications. This surface mount component delivers 84 lumens at 350mA with a color temperature of 2700K and a color rendering index of 80. The part is currently in active production status with 917 units available in inventory. Substitute parts are identified to provide design flexibility, inventory continuity, and alternative sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

XPEWHT-L1-0000-009E8

CreeLED, Inc.In Stock: 1026XPEWHT-L1-0000-009E8 Datasheet

Current PartRFQ

XPEWHT-L1-0000-009Z8

CreeLED, Inc.In Stock: 2863XPEWHT-L1-0000-009Z8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XPEWHT-L1-0000-009E8 is determined by strict equivalence across the following critical parameters:

• Color Temperature (CCT): 2700K warm white
• Luminous Flux: 84lm at 350mA test current
• Forward Voltage: 3.05V typical
• Package Type: 1414 (3535 Metric) surface mount
• Viewing Angle: 115°
• Thermal Resistance: 9°C/W
• Compliance: RoHS Compliant, REACH Unaffected
• Series: XLamp® XP-E

The substitute part XPEWHT-L1-0000-009Z8 matches all electrical and mechanical parameters, enabling direct replacement in circuit designs without modification to PCB layout, driver circuits, or thermal management systems.

Parameter Comparison

Engineering Selection Recommendations

Both the XPEWHT-L1-0000-009E8 and XPEWHT-L1-0000-009Z8 are active production components from CreeLED, Inc., with identical electrical performance, mechanical form factor, and regulatory compliance. Selection between these parts may be based on inventory availability, supply chain logistics, or procurement preferences. The XPEWHT-L1-0000-009Z8 currently maintains higher inventory levels at 2782 units compared to 917 units for the XPEWHT-L1-0000-009E8. Both parts satisfy RoHS and REACH compliance requirements for regulated markets.

Frequently Asked Questions (FAQ)

Q: Can XPEWHT-L1-0000-009Z8 be used as a direct replacement for XPEWHT-L1-0000-009E8?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including forward voltage, luminous flux, color temperature, package dimensions, and thermal characteristics. No circuit modifications or PCB redesign is required.

Q: Are there differences in color consistency between these two part numbers?

A: No. Both parts operate at 2700K with a CRI of 80 and deliver 84 lumens at 350mA test current. Color temperature and rendering characteristics are identical.

Q: What is the significance of the different suffixes (-009E8 vs. -009Z8)?

A: The suffix variation indicates different manufacturing batches or date codes from CreeLED, Inc. The electrical and mechanical specifications remain identical across both variants.

Q: Can these LEDs be operated at currents other than 350mA?

A: Yes. Both parts support operation up to a maximum current of 1A. However, luminous flux and thermal characteristics will vary with operating current. The 84 lumen specification applies specifically at 350mA test current.

Q: Are both parts suitable for high-temperature applications?

A: Both parts have a thermal resistance of 9°C/W. Thermal performance depends on PCB design, thermal management implementation, and ambient conditions. Refer to detailed thermal analysis for specific application requirements.

Q: What is the package compatibility for automated assembly?

A: Both parts use 1414 (3535 Metric) surface mount packaging in Tape & Reel format, compatible with standard pick-and-place equipment and reflow soldering processes.