XPEWHT-01-0000-00CC3 Equivalent & Substitute Parts

Part Overview

The XPEWHT-01-0000-00CC3 is a CreeLED XLamp® XP-E neutral white LED rated at 4300K color temperature. This surface-mount component delivers 104 lumens at 350mA test current with a forward voltage of 3.05V typical. The part is actively produced and RoHS compliant, making it suitable for general illumination applications requiring neutral white output in a compact 1414 (3535 metric) package.

Substitute parts become necessary when the primary part number reaches end-of-life status, inventory constraints occur, or when slight variations in color temperature are acceptable within application tolerances.

Substiute Parts

XPEWHT-01-0000-00CC3

CreeLED, Inc.In Stock: 925XPEWHT-01-0000-00CC3 Datasheet

Current PartRFQ

XPEWHT-L1-0000-00CE5

CreeLED, Inc.In Stock: 2130XPEWHT-L1-0000-00CE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The XPEWHT-01-0000-00CC3 has one parametric equivalent substitute: XPEWHT-L1-0000-00CE5.

Substitution is based on the following critical parameters that must remain constant:

• Series: XLamp® XP-E
• Mounting Type: Surface Mount
• Package / Case: 1414 (3535 Metric)
• Physical Dimensions: 0.136" L x 0.136" W (3.45mm x 3.45mm)
• Height - Seated (Max): 0.084" (2.13mm)
• Forward Voltage (Vf) Typical: 3.05V
• Current - Test: 350mA
• Current - Max: 1A
• Thermal Resistance: 9°C/W
• Viewing Angle: 115°
• CRI: 70 (Typ)
• Lumens/Watt @ 350mA: 97 lm/W
• RoHS Status: RoHS Compliant

The substitute part differs only in color temperature specification (4000K versus 4300K), which falls within the neutral white category and maintains identical electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the XPEWHT-01-0000-00CC3 and XPEWHT-L1-0000-00CE5 are active products from CreeLED, Inc., with full RoHS compliance and identical electrical and mechanical specifications. Selection between these parts depends on application-specific color temperature requirements within the neutral white spectrum.

The XPEWHT-01-0000-00CC3 operates at 4300K, while the substitute XPEWHT-L1-0000-00CE5 operates at 4000K. Both maintain identical forward voltage, current ratings, luminous flux, efficiency, and thermal characteristics. The choice between these parts is determined by whether the application requires the warmer 4000K output or the slightly cooler 4300K output.

Frequently Asked Questions (FAQ)

Q: Can XPEWHT-L1-0000-00CE5 be used as a direct replacement for XPEWHT-01-0000-00CC3?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical forward voltage (3.05V), current ratings (350mA test, 1A max), luminous flux (104lm), efficiency (97 lm/W), package dimensions (1414/3535 metric), and thermal characteristics (9°C/W). The only difference is color temperature: 4300K versus 4000K. Direct substitution is valid if the application tolerates this color temperature variation within the neutral white range.

Q: What is the difference between 4300K and 4000K color temperature?

A: Both are classified as neutral white. The 4000K variant produces a slightly warmer appearance compared to 4300K. The selection depends on the specific lighting application requirements and end-user preference for color tone.

Q: Are both parts available in the same packaging format?

A: Yes. Both XPEWHT-01-0000-00CC3 and XPEWHT-L1-0000-00CE5 are supplied in Tape & Reel (TR) packaging and use the identical 1414 (3535 metric) surface-mount package with matching physical dimensions and height specifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS compliant and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8541.41.0000).

Q: What is the thermal resistance specification, and does it differ between the two parts?

A: Both parts have a thermal resistance of 9°C/W. This specification is identical and does not vary between the substitute parts.