XPEROY-L1-0000-00B02 Equivalent & Substitute Parts

Part Overview

The XPEROY-L1-0000-00B02 is a CreeLED XLamp® XP-E Blue 455nm surface mount LED in a 1414 (3535 Metric) package. This part is classified as obsolete, making substitute components necessary for new designs and production continuity. The XP-E series represents an earlier generation of high-brightness LEDs, with the XP-E2 series providing an active production alternative with improved performance characteristics in the same package footprint.

Substiute Parts

XPEROY-L1-0000-00B02

CreeLED, Inc.In Stock: 1217XPEROY-L1-0000-00B02 Datasheet

Current PartRFQ

XPEBRY-L1-0000-00N02

CreeLED, Inc.In Stock: 1498XPEBRY-L1-0000-00N02 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XPEROY-L1-0000-00B02 is determined by the following critical parameters:

• Color and Wavelength: Blue 455nm (450nm ~ 460nm) range
• Package / Case: 1414 (3535 Metric) surface mount
• Electrical Characteristics: Forward voltage (Vf) 3.1V typical, test current 350mA, maximum current 1A
• Thermal Properties: Thermal resistance 9°C/W
• Compliance: RoHS Compliant, REACH Unaffected

The substitute part XPEBRY-L1-0000-00N02 maintains identical specifications across all critical parameters while offering improved luminous flux output and an active product status. Both parts share the same package footprint, electrical operating range, and compliance certifications, enabling direct substitution in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The XPEBRY-L1-0000-00N02 is the direct substitute for the obsolete XPEROY-L1-0000-00B02. Selection is based on the following factors:

• Product Status: The main part is obsolete; the substitute is active production, ensuring long-term availability and supply chain continuity.
• Compliance Alignment: Both parts maintain RoHS Compliance and REACH Unaffected status, satisfying regulatory requirements without modification.
• Electrical Compatibility: Identical forward voltage, test current, and maximum current ratings ensure drop-in replacement capability without circuit redesign.
• Package Compatibility: Both parts use the 1414 (3535 Metric) surface mount package with identical footprints, enabling direct PCB placement without layout changes.
• Performance Enhancement: The substitute delivers improved luminous flux (563mW vs. 550mW) and increased viewing angle (135° vs. 130°), providing performance benefits in the same form factor.

Frequently Asked Questions (FAQ)

Q: Can the XPEBRY-L1-0000-00N02 be used as a direct replacement for the XPEROY-L1-0000-00B02?

A: Yes. Both parts share identical electrical specifications (3.1V forward voltage, 350mA test current, 1A maximum current), the same 1414 (3535 Metric) package footprint, and equivalent thermal characteristics (9°C/W). No circuit modifications are required.

Q: What are the differences between these two parts?

A: The substitute is from the XP-E2 series (newer generation) versus the XP-E series (main part). The XP-E2 provides higher luminous flux (563mW vs. 550mW), a wider viewing angle (135° vs. 130°), and slightly greater seated height (2.39mm vs. 2.13mm). The substitute is active production while the main part is obsolete.

Q: Are there any height considerations for PCB assembly?

A: The substitute has a maximum seated height of 0.094" (2.39mm) compared to 0.084" (2.13mm) for the main part. This 0.010" (0.26mm) difference is within typical PCB assembly tolerances and does not affect standard reflow soldering processes.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the XPEROY-L1-0000-00B02 and XPEBRY-L1-0000-00N02 are RoHS Compliant and REACH Unaffected, meeting equivalent regulatory requirements.

Q: Why should I transition to the substitute part?

A: The main part is obsolete, creating supply and long-term availability risks. The substitute is active production from the same manufacturer, offering improved performance characteristics while maintaining full electrical and mechanical compatibility.