LED XLAMP XPE BLUE 460NM (XPEROY-L1-0000-00903) Equivalent & Substitute Parts

Part Overview

The XPEROY-L1-0000-00903 is a CreeLED XLamp® XP-E Blue 460nm surface mount LED in a 1414 (3535 Metric) package. This part is classified as obsolete. Due to its obsolete status, identifying equivalent and substitute parts is necessary for ongoing design support, production continuity, and component sourcing. The XLamp® XP-E2 series provides a direct successor with improved performance characteristics while maintaining electrical and mechanical compatibility.

Substiute Parts

XPEROY-L1-0000-00903

CreeLED, Inc.In Stock: 1065XPEROY-L1-0000-00903 Datasheet

Current PartRFQ

XPEBRY-L1-0000-00J03

CreeLED, Inc.In Stock: 1009XPEBRY-L1-0000-00J03 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The XPEBRY-L1-0000-00J03 qualifies as a direct substitute based on the following criteria:

• Wavelength Match: Both parts operate at 460nm (455nm ~ 465nm) blue spectrum
• Electrical Compatibility: Identical test current (350mA), forward voltage (3.1V typical), and maximum current (1A)
• Mechanical Compatibility: Identical package type (1414/3535 Metric), mounting type (Surface Mount), and footprint dimensions (3.45mm x 3.45mm)
• Thermal Properties: Identical thermal resistance (9°C/W)
• Compliance: Both parts are RoHS Compliant and REACH Unaffected

The primary difference is the product series evolution from XLamp® XP-E to XLamp® XP-E2, with the substitute offering improved luminous flux output and active product status.

Parameter Comparison

Engineering Selection Recommendations

The XPEBRY-L1-0000-00J03 (XLamp® XP-E2) is the recommended substitute for the obsolete XPEROY-L1-0000-00903 (XLamp® XP-E). Both parts maintain identical electrical specifications and mechanical compatibility, ensuring direct PCB-level substitution without design modification.

The XLamp® XP-E2 offers improved luminous flux performance (463mW versus 388mW at 350mA test current) and a slightly wider viewing angle (135° versus 130°), representing a performance enhancement over the original part. The marginal increase in seated height (0.094" versus 0.084") is within typical PCB assembly tolerances and does not impact standard surface mount processing.

Both parts carry equivalent compliance certifications (RoHS Compliant, REACH Unaffected, EAR99 ECCN classification), ensuring regulatory continuity in applications requiring these standards.

Frequently Asked Questions (FAQ)

Q: Can the XPEBRY-L1-0000-00J03 be used as a direct replacement without PCB redesign?

A: Yes. The substitute part maintains identical electrical parameters (350mA test current, 3.1V forward voltage, 1A maximum current), package type (1414/3535 Metric), and footprint dimensions (3.45mm x 3.45mm). No circuit design changes are required.

Q: What is the difference in height between these parts?

A: The main part (XPEROY) has a maximum seated height of 0.084" (2.13mm), while the substitute (XPEBRY) has a maximum seated height of 0.094" (2.39mm). This 0.010" (0.26mm) difference is within standard PCB assembly clearance specifications and does not affect typical mounting applications.

Q: Are the wavelength specifications identical?

A: Yes. Both parts operate at 460nm blue wavelength with an identical tolerance range of 455nm to 465nm.

Q: What is the performance difference in luminous flux?

A: At the 350mA test current and 25°C temperature, the substitute part delivers 463mW (450mW ~ 475mW) compared to the main part's 388mW (350mW ~ 425mW). This represents approximately 19% higher luminous flux output.

Q: Are there any compliance or certification differences?

A: No. Both parts are RoHS Compliant, REACH Unaffected, and classified under ECCN EAR99 with identical HTSUS code 8541.41.0000.

Q: Why is the main part classified as obsolete?

A: The XPEROY-L1-0000-00903 is part of the original XLamp® XP-E series, which has been superseded by the XLamp® XP-E2 series. The substitute part represents the current active product line from CreeLED, Inc.