LED XLAMP XPE BLUE 455NM (XPEROY-L1-0000-00902) Equivalent & Substitute Parts

Part Overview

The XPEROY-L1-0000-00902 is a CreeLED XLamp® XP-E Blue 455nm surface mount LED in a 1414 (3535 Metric) package. This part is classified as obsolete. The XLamp® XP-E series has been superseded by the XLamp® XP-E2 generation, which offers improved performance characteristics while maintaining electrical and mechanical compatibility. Identifying equivalent substitute parts is necessary to support ongoing production and design requirements where the original part is no longer available.

Substiute Parts

XPEROY-L1-0000-00902

CreeLED, Inc.In Stock: 1015XPEROY-L1-0000-00902 Datasheet

Current PartRFQ

XPEBRY-L1-0000-00J02

CreeLED, Inc.In Stock: 1179XPEBRY-L1-0000-00J02 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XPEROY-L1-0000-00902 is determined by the following critical parameters:

• Color and Wavelength: Blue 455nm (450nm ~ 460nm) range
• Package / Case: 1414 (3535 Metric) surface mount
• Electrical Specifications: Current ratings (350mA test, 1A max) and forward voltage (3.1V typical)
• Mounting Type: Surface mount compatibility
• Compliance: RoHS compliance and REACH unaffected status

The substitute part XPEBRY-L1-0000-00J02 meets all these criteria while offering enhanced performance in the active product line.

Parameter Comparison

Engineering Selection Recommendations

The XPEBRY-L1-0000-00J02 (XLamp® XP-E2) is the direct substitute for the obsolete XPEROY-L1-0000-00902 (XLamp® XP-E). Both parts maintain identical electrical specifications (350mA test current, 1A maximum current, 3.1V forward voltage) and package form factor (1414 / 3535 Metric). The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

Both parts carry RoHS compliance and REACH unaffected status, meeting regulatory requirements for electronic component applications. The substitute part demonstrates improved luminous flux output (463mW versus 388mW at 350mA test current) and a wider viewing angle (135° versus 130°), representing a performance enhancement within the same product family.

The maximum seated height difference (0.094" versus 0.084") must be evaluated against specific PCB layout and mechanical clearance constraints in the target application.

Frequently Asked Questions (FAQ)

Q: Can the XPEBRY-L1-0000-00J02 be used as a direct replacement for the XPEROY-L1-0000-00902?

A: Yes. Both parts share identical electrical specifications (350mA test current, 1A maximum current, 3.1V forward voltage), wavelength (455nm), and package form factor (1414 / 3535 Metric surface mount). The substitute is from the same manufacturer and represents the active-production successor to the obsolete part.

Q: What are the key differences between these two parts?

A: The primary differences are product status (obsolete versus active), luminous flux output (388mW versus 463mW at 350mA), viewing angle (130° versus 135°), and seated height (2.13mm versus 2.39mm). Electrical and wavelength specifications remain identical.

Q: Are there any compliance or regulatory concerns with substitution?

A: No. Both parts are RoHS compliant and REACH unaffected, meeting standard regulatory requirements for electronic components.

Q: Does the height difference affect PCB compatibility?

A: The substitute part has a maximum seated height of 2.39mm compared to 2.13mm for the original part. This 0.26mm difference must be evaluated against specific PCB layout, solder profile, and mechanical clearance requirements in the target application.

Q: Is the improved luminous flux of the substitute part a concern for existing designs?

A: The higher luminous flux output (463mW versus 388mW) represents improved performance. Applications requiring specific brightness levels should verify that the increased output remains within acceptable operating parameters for the target design.