XPEROY-L1-0000-00901 LED XLamp XP-E Blue 458nm Equivalent & Substitute Parts

Part Overview

The XPEROY-L1-0000-00901 is a CreeLED XLamp® XP-E Blue LED operating at 458nm wavelength in a 1414 (3535 Metric) surface mount package. This part is classified as obsolete. Due to its discontinued status, identifying equivalent and substitute components is necessary for design continuity, production planning, and long-term supply chain management. The XLamp® XP-E2 series provides a direct successor with improved performance characteristics while maintaining electrical and mechanical compatibility.

Substiute Parts

XPEROY-L1-0000-00901

CreeLED, Inc.In Stock: 904XPEROY-L1-0000-00901 Datasheet

Current PartRFQ

XPEBRY-L1-0000-00J01

CreeLED, Inc.In Stock: 3293XPEBRY-L1-0000-00J01 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XPEROY-L1-0000-00901 is determined by the following critical parameters:

• Wavelength specification: 458nm (450nm ~ 465nm) blue LED
• Electrical characteristics: 350mA test current, 3.1V forward voltage, 1A maximum current
• Package form factor: 1414 (3535 Metric) surface mount
• Thermal performance: 9°C/W thermal resistance
• Compliance certifications: RoHS Compliant, REACH Unaffected, EAR99 classification

The XPEBRY-L1-0000-00J01 qualifies as a direct substitute based on matching wavelength, electrical ratings, package dimensions, and thermal characteristics. The XLamp® XP-E2 series represents an active product line with enhanced luminous flux output while maintaining backward compatibility with the original XP-E specifications.

Parameter Comparison

Engineering Selection Recommendations

The XPEBRY-L1-0000-00J01 is the designated substitute for the obsolete XPEROY-L1-0000-00901. Selection is based on:

• Active product status ensuring ongoing availability and supply chain continuity
• Identical electrical specifications (wavelength, forward voltage, current ratings) enabling direct circuit compatibility
• Matching package geometry and thermal characteristics allowing PCB layout reuse without modification
• Equivalent compliance certifications (RoHS Compliant, REACH Unaffected, EAR99) maintaining regulatory alignment
• Improved luminous flux output (463mW vs. 388mW) providing enhanced performance within the same electrical envelope
• Marginal height increase (0.094" vs. 0.084") remaining within typical PCB assembly tolerances

Frequently Asked Questions (FAQ)

Q: Can the XPEBRY-L1-0000-00J01 be used as a direct replacement for the XPEROY-L1-0000-00901 without circuit modifications?

A: Yes. Both parts share identical wavelength (458nm), forward voltage (3.1V), test current (350mA), maximum current (1A), package form factor (1414/3535 Metric), and thermal resistance (9°C/W). No circuit redesign is required.

Q: What is the difference in luminous flux between these parts?

A: The XPEBRY-L1-0000-00J01 produces 463mW compared to 388mW for the XPEROY-L1-0000-00901 at 350mA test current and 25°C. This represents improved efficiency in the XP-E2 generation.

Q: Are there any height clearance concerns when substituting?

A: The substitute part has a maximum seated height of 0.094" compared to 0.084" for the original. The 0.010" (0.25mm) difference is within standard PCB assembly tolerances and should not cause clearance issues in typical applications.

Q: Do both parts have the same viewing angle?

A: The XPEROY-L1-0000-00901 has a 130° viewing angle while the XPEBRY-L1-0000-00J01 has a 135° viewing angle. This 5° difference represents a slightly wider light distribution in the substitute part.

Q: Are the compliance certifications identical?

A: Yes. Both parts are RoHS Compliant, REACH Unaffected, and classified as EAR99 for export control purposes.

Q: What packaging formats are available for the substitute part?

A: The XPEBRY-L1-0000-00J01 is supplied in Tape & Reel (TR) format, while the original XPEROY-L1-0000-00901 was available in Cut Tape (CT) and Digi-Reel® formats.