XPEHEW-01-0000-00EE7 Equivalent & Substitute Parts

Part Overview

The XPEHEW-01-0000-00EE7 is a CreeLED XLamp® XP-E HEW warm white LED (3000K) in a 1414 (3535 Metric) surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design requirements and production continuity. The part delivers 118 lm at 350mA test current with a forward voltage of 3V and 120° viewing angle, suitable for general illumination applications requiring warm white color temperature.

Substiute Parts

XPEHEW-01-0000-00EE7

CreeLED, Inc.In Stock: 1069XPEHEW-01-0000-00EE7 Datasheet

Current PartRFQ

XTEAWT-00-0000-00000BEE7

CreeLED, Inc.In Stock: 1798XTEAWT-00-0000-00000BEE7 Datasheet

SimilarRFQ

XPCWHT-L1-0000-00EE7

CreeLED, Inc.In Stock: 1087XPCWHT-L1-0000-00EE7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XPEHEW-01-0000-00EE7 are identified based on the following critical parameters that must align for functional equivalence:

• Color and CCT: White, Warm 3000K (exact match required)
• Package / Case: 1414 (3535 Metric) surface mount (exact match required)
• Flux output: 118 lm nominal at test current (114–122 lm acceptable range)
• CRI: 70 or higher
• Viewing angle: 115° or greater
• Forward voltage: 2.85V to 3V range
• Test current: 350mA nominal
• Mounting type: Surface mount

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are manufactured by CreeLED, Inc. and maintain the same color temperature (3000K), flux output (118 lm), and package footprint (1414 / 3535 Metric) as the obsolete XPEHEW-01-0000-00EE7.

XTEAWT-00-0000-00000BEE7 (XLamp® XT-E) is classified as active product status and carries RoHS Compliant certification. This part operates at a slightly lower forward voltage (2.85V vs. 3V) and offers improved thermal performance (5°C/W vs. 6°C/W). The maximum current rating is higher at 1.5A, and efficiency is marginally better at 118 lm/W. Height is 2.54mm, which is 0.33mm taller than the main part. This part is supplied in Cut Tape (CT) packaging.

XPCWHT-L1-0000-00EE7 (XLamp® XP-C) is classified as active product status. This part maintains identical forward voltage (3V) and viewing angle (120°) as the main part, with the same efficiency rating (112 lm/W). Height is 2.13mm, which is 0.08mm shorter than the main part. Thermal resistance is higher at 8°C/W. Maximum current is limited to 500mA. This part is supplied in Tape & Reel (TR) packaging.

Selection between the two substitutes depends on circuit design constraints: forward voltage tolerance, thermal management requirements, current capacity needs, and PCB assembly height restrictions.

Frequently Asked Questions (FAQ)

Q: Can XTEAWT-00-0000-00000BEE7 be used as a direct replacement for XPEHEW-01-0000-00EE7?

A: Yes. Both parts deliver 118 lm at 350mA test current in the same 1414 (3535 Metric) package with 3000K color temperature. The forward voltage difference (2.85V vs. 3V) is within typical circuit design tolerance. Verify that your current-limiting circuit accommodates the 0.15V difference and that the 2.54mm height does not conflict with PCB assembly constraints.

Q: Can XPCWHT-L1-0000-00EE7 be used as a direct replacement for XPEHEW-01-0000-00EE7?

A: Yes. Both parts deliver 118 lm at 350mA test current in the same 1414 (3535 Metric) package with identical forward voltage (3V) and viewing angle (120°). The 2.13mm height is lower than the main part, which may be advantageous for compact designs. Maximum current is limited to 500mA, so applications requiring higher current operation must use XTEAWT-00-0000-00000BEE7 or the main part.

Q: What is the significance of the 115° viewing angle on XTEAWT-00-0000-00000BEE7 versus 120° on the main part?

A: The 5° difference in viewing angle is minor and typically acceptable for general illumination applications. If the design specifically requires 120° or greater light distribution, XPCWHT-L1-0000-00EE7 maintains the 120° specification.

Q: How do thermal resistance differences affect part selection?

A: XTEAWT-00-0000-00000BEE7 has the lowest thermal resistance (5°C/W), providing superior heat dissipation. XPEHEW-01-0000-00EE7 is rated at 6°C/W, and XPCWHT-L1-0000-00EE7 is rated at 8°C/W. For high-current or thermally constrained applications, lower thermal resistance is preferable. Verify junction temperature limits based on your specific operating current and ambient conditions.

Q: What packaging differences exist between the substitute parts?

A: XTEAWT-00-0000-00000BEE7 is supplied in Cut Tape (CT) packaging, while XPCWHT-L1-0000-00EE7 is supplied in Tape & Reel (TR) packaging. Select based on your assembly process requirements and volume needs.

Q: Are there compliance or regulatory differences between the parts?

A: XTEAWT-00-0000-00000BEE7 is explicitly RoHS Compliant. All three parts carry REACH Unaffected status and share the same ECCN (EAR99) and HTSUS (8541.41.0000) classifications. Verify compliance requirements for your specific application and region.