XPEBWT-L1-0000-00DA4 Equivalent & Substitute Parts

Part Overview

The XPEBWT-L1-0000-00DA4 is an XLamp® XP-E2 neutral white LED (4000K) manufactured by CreeLED, Inc., designed for surface mount applications in 1414 (3535 Metric) package format. This Active product delivers 111 lm at 85°C with a forward voltage of 2.9V at 350mA test current. Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this LED category, enabling component interchangeability in circuit designs where performance requirements remain constant.

Substiute Parts

XPEBWT-L1-0000-00DA4

CreeLED, Inc.In Stock: 867XPEBWT-L1-0000-00DA4 Datasheet

Current PartRFQ

XTEAWT-00-0000-000000DE5

CreeLED, Inc.In Stock: 1947XTEAWT-00-0000-000000DE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XPEBWT-L1-0000-00DA4 is determined by the following critical parameters:

• Color and Correlated Color Temperature (CCT): White, Neutral 4000K
• Flux output at 85°C, 350mA test current: 111 lm (107–114 lm range)
• Forward voltage range: Compatible with 2.9V nominal operation
• Test current: 350mA
• Package format: 1414 (3535 Metric) surface mount
• Mounting type: Surface Mount
• Thermal characteristics: Thermal resistance ≤ 9°C/W
• Compliance: RoHS Compliant, REACH Unaffected

The substitute part XTEAWT-00-0000-000000DE5 meets these criteria within the allowed electrical and mechanical tolerances for this LED category.

Parameter Comparison

Engineering Selection Recommendations

Both the XPEBWT-L1-0000-00DA4 and XTEAWT-00-0000-000000DE5 are Active products with RoHS Compliant and REACH Unaffected status, meeting current regulatory requirements. The substitute part XTEAWT-00-0000-000000DE5 demonstrates equivalent luminous flux output (111 lm at 85°C, 350mA) and identical color specification (White, Neutral 4000K) within the specified tolerance range. Both parts are manufactured by CreeLED, Inc., and utilize the same 1414 (3535 Metric) surface mount package format with identical footprint dimensions (3.45mm × 3.45mm). Selection between these parts depends on circuit design constraints related to forward voltage tolerance (2.9V vs. 2.85V), maximum current rating (1A vs. 1.5A), viewing angle requirement (110° vs. 115°), and thermal management capability (9°C/W vs. 5°C/W).

Frequently Asked Questions (FAQ)

Q: Can XTEAWT-00-0000-000000DE5 be used as a direct replacement for XPEBWT-L1-0000-00DA4?

A: Yes, within the constraints of your circuit design. Both parts deliver identical luminous flux (111 lm at 85°C, 350mA) and color specification (White, Neutral 4000K). The substitute has a lower forward voltage (2.85V vs. 2.9V) and lower thermal resistance (5°C/W vs. 9°C/W), which may require circuit verification for current-limiting resistor values and thermal management assumptions.

Q: Are there package compatibility concerns?

A: No. Both parts use the 1414 (3535 Metric) surface mount package with identical footprint dimensions (3.45mm × 3.45mm). PCB layout and reflow profiles remain unchanged. The substitute part has a maximum seated height of 2.54mm compared to 2.39mm for the main part; verify clearance in your mechanical design.

Q: What are the key differences between these parts?

A: The XTEAWT-00-0000-000000DE5 offers improved thermal performance (5°C/W vs. 9°C/W), higher maximum current rating (1.5A vs. 1A), slightly lower forward voltage (2.85V vs. 2.9V), wider viewing angle (115° vs. 110°), and higher luminous efficacy (111 lm/W vs. 109 lm/W).

Q: Do both parts meet compliance requirements?

A: Yes. Both parts are RoHS Compliant and REACH Unaffected, meeting current regulatory standards for electronic components.

Q: What should I verify before substitution?

A: Verify forward voltage compatibility in your current-limiting circuit, confirm thermal management assumptions based on the lower thermal resistance of the substitute, and check mechanical clearance for the 0.15mm additional height of the substitute part.