XPEBWT-L1-0000-00CF5 Equivalent & Substitute Parts

Part Overview

The XPEBWT-L1-0000-00CF5 is a Cree XLamp® XP-E2 white neutral LED with a correlated color temperature of 4250K, designed for surface mount applications in 1414 (3535 Metric) packages. This active product delivers 104 lm at 85°C under 350mA test current with a forward voltage of 2.9V and a 110° viewing angle. Alternative part numbers are necessary when specific color temperature requirements differ, when higher current capacity is needed, or when inventory availability requires substitution with equivalent performance characteristics.

Substiute Parts

XPEBWT-L1-0000-00CF5

CreeLED, Inc.In Stock: 822XPEBWT-L1-0000-00CF5 Datasheet

Current PartRFQ

XPEBWT-L1-0000-00CZ5

CreeLED, Inc.In Stock: 2105XPEBWT-L1-0000-00CZ5 Datasheet

Parametric EquivalentRFQ

XTEAWT-00-0000-00000LCE5

CreeLED, Inc.In Stock: 23491XTEAWT-00-0000-00000LCE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XPEBWT-L1-0000-00CF5 is determined by the following critical parameters:

• Package / Case: Must be 1414 (3535 Metric) for mechanical and thermal compatibility
• Mounting Type: Must be Surface Mount
• Color: Must be White, Neutral
• Test Current: Must be 350mA or compatible with circuit design
• Forward Voltage (Vf): Must be within acceptable range for power supply design (2.85V–2.9V acceptable)
• Maximum Current Rating: Must support circuit requirements
• Thermal Resistance: Affects thermal management; lower values indicate better heat dissipation
• Product Status: Must be Active
• Compliance: Must maintain RoHS and REACH compliance

The substitute parts listed below meet these criteria with variations in color temperature (CCT), series designation, and thermal performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

XPEBWT-L1-0000-00CZ5 is a direct parametric equivalent within the XLamp® XP-E2 series. The primary difference is color temperature: 4000K versus 4250K. Both parts share identical electrical characteristics (2.9V forward voltage, 350mA test current, 1A maximum current), identical thermal resistance (9°C/W), and identical package dimensions. Selection between these two depends solely on color temperature requirements for the application. Both maintain Active product status and full RoHS compliance.

XTEAWT-00-0000-00000LCE5 represents a cross-series substitute from the XLamp® XT-E line. This part offers improved thermal performance (5°C/W versus 9°C/W), higher maximum current rating (1.5A versus 1A), and slightly higher efficiency (104 lm/W versus 102 lm/W). Forward voltage is marginally lower (2.85V versus 2.9V), and viewing angle is wider (115° versus 110°). Height increases from 2.39mm to 2.54mm. This substitute is suitable for applications requiring enhanced thermal management or higher current capacity. Color temperature is 4000K. Product status is Active with full RoHS compliance.

All three parts maintain REACH Unaffected status and EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can XPEBWT-L1-0000-00CZ5 be used as a direct replacement for XPEBWT-L1-0000-00CF5?

A: Yes, with the exception of color temperature. Both parts are identical in electrical performance, thermal characteristics, and package dimensions. XPEBWT-L1-0000-00CZ5 operates at 4000K while the original operates at 4250K. If color temperature is not a critical specification, this substitute is mechanically and electrically compatible.

Q: What are the advantages of XTEAWT-00-0000-00000LCE5 over the original part?

A: XTEAWT-00-0000-00000LCE5 provides superior thermal performance with 5°C/W thermal resistance compared to 9°C/W, supports higher maximum current (1.5A versus 1A), and delivers higher efficiency (104 lm/W versus 102 lm/W). These characteristics make it suitable for high-power or thermally constrained applications. The trade-off is a 0.15mm increase in maximum height.

Q: Are there any compatibility concerns with the height difference between XTEAWT-00-0000-00000LCE5 and the original part?

A: The height difference is 0.15mm (2.54mm versus 2.39mm). This is a minor variation within typical PCB assembly tolerances. Verify that the application's mechanical clearance and solder reflow profile accommodate this height increase before substitution.

Q: Do all three parts require the same circuit design considerations?

A: The forward voltage difference between XPEBWT-L1-0000-00CF5 (2.9V) and XTEAWT-00-0000-00000LCE5 (2.85V) is 0.05V. This is negligible for most power supply designs. However, if the circuit is optimized for precise voltage regulation, verify that the power supply can accommodate both voltage specifications. The higher maximum current rating of XTEAWT-00-0000-00000LCE5 (1.5A) requires no additional design changes if the original circuit was designed for 1A operation.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All three parts are supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.