XPEBWT-H1-0000-00FE7 Equivalent & Substitute Parts

Part Overview

The XPEBWT-H1-0000-00FE7 is an LED Lighting XLamp® XP-E2 White, Warm 3000K surface mount component manufactured by CreeLED, Inc. This part is classified as Active product status and is available in Tape & Reel packaging. The component operates at 2.84V forward voltage with a test current of 350mA, delivering 126lm at 85°C with a 110° viewing angle in a 1414 (3535 Metric) package footprint.

Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and performance optimization across similar application requirements. Substitutes are selected based on matching critical electrical parameters, thermal characteristics, and mechanical compatibility within the same package class.

Substiute Parts

XPEBWT-H1-0000-00FE7

CreeLED, Inc.In Stock: 1010XPEBWT-H1-0000-00FE7 Datasheet

Current PartRFQ

XPGBWT-H1-0000-00FE7

CreeLED, Inc.In Stock: 3142XPGBWT-H1-0000-00FE7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are identified based on strict alignment with the following critical parameters:

Electrical Compatibility Criteria:

• Color: White, Warm (3000K CCT)
• CRI: 80 minimum
• Flux output: 122–130lm range at 85°C, 350mA test current
• Test current: 350mA
• Maximum current rating: 1.5A
• Forward voltage tolerance: within typical operating range

Mechanical Compatibility Criteria:

• Package / Case: 1414 (3535 Metric)
• Mounting type: Surface Mount
• Size / Dimension: 0.136" L × 0.136" W (3.45mm × 3.45mm)
• Height - Seated (Max): 0.094" (2.39mm)
• Packaging format: Tape & Reel (TR)

Thermal Criteria:

• Thermal resistance of package: within acceptable range for thermal management design

Compliance Criteria:

• ECCN: EAR99
• HTSUS: 8541.41.0000
• Product Status: Active

The XPGBWT-H1-0000-00FE7 meets all substitution criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

XPGBWT-H1-0000-00FE7 as Substitute for XPEBWT-H1-0000-00FE7:

The XPGBWT-H1-0000-00FE7 is a valid parametric equivalent based on the following engineering criteria:

1. Electrical Equivalence: Both parts deliver identical flux output (126lm at 85°C, 350mA), matching CCT (3000K), and CRI (80). Forward voltage differs by 0.12V (2.84V vs. 2.72V), which is within acceptable tolerance for circuit design and does not require redesign of current-limiting resistor networks in standard LED driver configurations.

2. Mechanical Compatibility: Both parts share identical package dimensions (1414/3535 Metric), footprint (0.136" × 0.136"), and height (0.094" max seated height). PCB layout and assembly processes require no modification.

3. Thermal Performance: The substitute part offers superior thermal characteristics (4°C/W vs. 5.8°C/W), reducing junction temperature rise and improving long-term reliability in thermal-constrained applications.

4. Optical Performance: The substitute provides a wider viewing angle (115° vs. 110°), which may be advantageous in applications requiring broader light distribution.

5. Efficiency Gain: The substitute delivers higher lumens per watt (133 lm/W vs. 127 lm/W), resulting in improved power efficiency at the same test current.

6. Compliance and Status: Both parts carry identical ECCN (EAR99) and HTSUS classifications, and both maintain Active product status, ensuring long-term availability and regulatory consistency.

7. Supply Chain: The substitute part has higher inventory availability (3101 Pcs vs. 956 Pcs), supporting production continuity.

Frequently Asked Questions (FAQ)

Q1: Can XPGBWT-H1-0000-00FE7 be used as a direct drop-in replacement for XPEBWT-H1-0000-00FE7?

A: Yes. Both parts share identical package dimensions (1414/3535 Metric), footprint, and height. No PCB layout or assembly process modifications are required. The 0.12V forward voltage difference (2.84V vs. 2.72V) is within standard LED driver tolerance and does not necessitate circuit redesign in typical applications.

Q2: Are there any optical differences between these parts?

A: The substitute part (XPGBWT-H1-0000-00FE7) provides a wider viewing angle (115° vs. 110°). Both parts deliver identical flux output (126lm at 85°C, 350mA) and color temperature (3000K, CRI 80). The wider angle may improve light distribution in applications where broader coverage is beneficial.

Q3: What are the thermal advantages of the substitute part?

A: The XPGBWT-H1-0000-00FE7 has lower thermal resistance (4°C/W vs. 5.8°C/W), resulting in reduced junction temperature rise at equivalent power dissipation. This improves reliability and extends operational life in thermally constrained designs.

Q4: Do both parts have the same electrical ratings?

A: Both parts are rated for 350mA test current and 1.5A maximum current. Forward voltage differs slightly (2.84V vs. 2.72V), but this is within acceptable operating tolerance. Flux output, CRI, and CCT are identical.

Q5: Are there compliance or regulatory differences?

A: No. Both parts carry identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications. Both maintain Active product status and are suitable for equivalent regulatory and export compliance requirements.

Q6: Which part should be selected for new designs?

A: Selection depends on application requirements. The substitute part (XPGBWT-H1-0000-00FE7) offers superior thermal performance, higher efficiency, and wider viewing angle. The main part (XPEBWT-H1-0000-00FE7) may be selected if specific forward voltage characteristics are required for existing circuit designs. Both are valid engineering choices.

Q7: Are packaging and tape specifications identical?

A: Yes. Both parts are supplied in Tape & Reel (TR) format with identical package specifications (1414/3535 Metric). Assembly equipment and handling procedures are interchangeable.